Documente Academic
Documente Profesional
Documente Cultură
1
1. It deals only with the motion of bodies without reference to the
forces that cause them.
a. Kinetics
b. Motion
c. Kinematics
d. Acceleration
2. Progressive change in position of a body is called:
a. Acceleration
b. Motion
c. Force
d. Momentum
3. Cam in general maybe divided into two classes; inform motion
and _____________ motion cam.
a. Reverse
b. Gravity
c. Deceleration
d. Acceleration
4. Product of mass and linear velocity is known as:
a. Impulse
b. Linear momentum
c. Angular momentum
d. Impact
5. It is the motion of an object diminished/decreased speed.
a. Deceleration
b. Retarded motion
c. Negative impulse
d. All of these
6. It is a property of matter, which causes it to resist any change in
its motion or state of rest.
a. Brake
b. Friction
c. Inertia
d. Impulse
7. If the velocity of mass is the same all the time during which
motion takes place is called:
a. Deceleration
b. Uniform motion
c. Acceleration
d. None of these
8. Statement that a given body is in static equilibrium means that
the body cannot.
a. Kinematics
b. Curvilinear translation
c. Projectile
d. Acceleration
10. The object thrown upward will return to earth the magnitude of
the terminal velocity equal to.
a. Zero
d. Initial velocity
11. The follower reciprocates or oscillates in a plane perpendicular
to the axis of rotation of the cam.
a. Radial cam
b. Cylindrical cam
c. Cam curves
d. Tangential cam
12. The follower reciprocates or oscillates in a plane parallel to the
axis of rotation.
a. Cam curves
b. Cylindrical cam
c. Tangential cam
d. Radial cam
13. A cone formed by elements, which are perpendicular to the
elements of the pitch cone at the large end.
a. Cone distance
b. Back cone
c. Root cone
d. Cone center
14. The ability of moving body to perform work is called:
a. Internal energy
b. Potential energy
c. Kinetic energy
d. Flow work
15. A slider crank chain is made up of
b. Rolling pairs
d. Turning pairs
18 A cam where the follower reciprocate or oscillates in a plane
parallel to the axis of the cam is called:
a. Circular cam
b. Cylindrical cam
c. Reciprocating cam
d. Tangential cam
19. Instantaneous center of rotation of a link in a four bar
mechanism lies on
a. Acceleration
b. Displacement
c. Motion
d. Velocity
21. Which of the following is the rate at which the velocity is
changing?
a. Acceleration
b. Linear
c. Motion
d. Vertical
22. The direction of the __________ is toward the center of the
circle in which, the study moves.
a. Centripetal acceleration
b. Centrifugal acceleration
c. Radial cam
d. Tangential
23. It is a device that changes the magnitude, direction or more
mode of application of a torque or force while transmitting it for a
particular purpose.
a. Frame
b. Machine
c. Mechanism
d. Structure
24. The process of obtaining the resultant of any numbers of
vectors.
a. Scalar quantity
b. Vector composition
c. Vector quantity
d. Vector resolution
25. It has magnitude, direction and sense.
a. Scalar quantity
b. Absolute quantity
c. Vector quantity
d. Relative quantity
26. A plate cylinder or other solid with a surface of contact so
designed as to cause or modify the motion of the piece.
a. Cam
b. Disc
c. Gear
d. Pulley
27. When acceleration is zero, the
a. Velocity is constant
b. Velocity is negative
c. Velocity is variable
d. Velocity is zero
28. When the velocity is changing, the acceleration is
a. Constant
b. Not constant
c. Variable
d. Zero
29. Klein’s construction is used to determine the
d. B and C above
31. The cam angle is
c. The point of cam pitch circle that has the maximum pressure
a. 4
b. 6
c. 8
d. 12
35. Peaucellier mechanism has how many links?
a. 4
b. 5
c. 6
d. 8
36. A cam with a roller follower would constitute which type of pair?
a. Close pair
b. Higher pair
c. Lower pair
d. Open pair
37. Kinematics pairs are those pairs that have
a. Higher pairs
b. Lower pairs
c. Rolling pairs
d. Spherical pairs
39. The number of links in a pantograph is equal to
a. 3
b. 4
c. 5
d. 6
40. In elliptical trammels,
a. Cylindrical pair
b. Higher pair
c. Lower pair
d. Sliding pair
45. The total no of instantaneous center for mechanism of N links is
equal to
a. 2N
b. (N-1)(N+1)
c. 2N(N-1)
d. N(N-1)/2
46. A kinematics chain needs a minimum of
a. L=2/3(J+2)
b. L=3/2(J+2)
c. L=2/3(L+2)
d. J=3/2(L+2)
48. Incase of an elliptical trammel
c. Higher pair
d. whitworth-quick-return mechanism
50. It is one that is not appreciably deformed by the action of any
external force or load.
a. Rigid body
b. Structure
c. Frame
d. Mechanism