Documente Academic
Documente Profesional
Documente Cultură
= Belt Drives
= lat belt and V-belt
= lat Pulley Drives analysis
= V Pulley Drives analysis
= Power Transmission
= Initial Tension
= Maximum power transmitted
= Problem Examples
V ter gone through these topics, you should be able
to:
= review the basic principle o belt drives
= de ine the de inition o lat belt and v-belt s
= Solve problems based on lat pulley drives and v-
pulley drives
= sed to transmit rotational motion
and torque rom one sha t to
another, smoothly, quietly and
inexpensively.
= Vdvantages o belt drives:
I. Less expensive than gear or chain lat belt
drives drives
II. Have lexible sha t center
distances, where gear drives are
restricted
III. Operate smoothly and with less
noise at high speeds
IV. Required no lubrication
V. Can be designed to slip when an
overload occurs in the machine
°
= lat belt
c)Timing belt
!
p
"#$
2)Setch the arrangement o the pulley
"#$
=
"#$
=
"#$
=
"#$
=
'(
*
2) V V-belt is used to transmit power between two
pulleys o diameters 6mm and 2mm, the
distance between their centers being 6mm. The
groove angle is 4o and the coe icient o riction
.3. I the maximum permissible belt tension is 4,
what power can be transmitted i the larger pulley is
driven at 6rev/min?
=
"#$