Documente Academic
Documente Profesional
Documente Cultură
ANDHRA PRADESH
Name : S. SHIVAKUMAR
Designation : Senior Lecturer
Branch : ELECTRONICS & COMMUNICATION ENGG.
Institute : GOVT. INSTITUTE OF ELECTRONICS SEC’BAD.
Year / Semester : III Semester
Subject : ELECTRONIC CIRCUITS-I.
Sub.Code : EC – 302
Topic : Fabrication of ICs
Duration : 150 minutes
Sub – Topic : Surface mount technology
Teaching Aids : Pictures
EC 302.71to73 1
Recap
EC 302.71to73 2
OBJECTIVES
EC 302.71to73 3
Surface-mount technology
EC 302.71to73 4
Surface-mount technology
EC 302.71to73 5
Surface-mount technology
EC 302.71to73 6
Surface Mount Technology
EC 302.71to73 7
SURFACE-MOUNT DEVICES or SMDs
EC 302.71to73 8
SURFACE-MOUNT DEVICES or SMDs
EC 302.71to73 9
SURFACE-MOUNT DEVICES or SMDs
SMDchips:
EC 302.71to73 10
SURFACE-MOUNT DEVICES or SMDs
SMD
capacitors:
EC 302.71to73 11
PLACING SMDS
• Manual placement
EC 302.71to73 12
Mounting of SMCS
EC 302.71to73 13
Mounting of SMCS
EC 302.71to73 14
Mounting of SMCS
EC 302.71to73 15
Mounting of SMCS
EC 302.71to73 16
Mounting of SMCS
EC 302.71to73 17
Mounting of SMCS
• The boards are then conveyed into the reflow soldering
oven.
EC 302.71to73 18
Mounting of SMCS
• The boards then enter a zone where the temperature is
high enough to melt the solder particles in the solder paste,
bonding the component leads to the pads on the circuit
board.
• The surface tension of the molten solder helps keep the
components in place, and if the solder pad geometries are
correctly designed, surface tension automatically aligns the
components on their pads.
EC 302.71to73 19
Mounting of SMCS
EC 302.71to73 20
Mounting of SMCS
EC 302.71to73 21
Mounting of SMCS
EC 302.71to73 22
Mounting of SMCS
EC 302.71to73 23
Mounting of SMCS
EC 302.71to73 24
Mounting of SMCS
EC 302.71to73 25
Mounting of SMCS
EC 302.71to73 26
Mounting of SMCS
EC 302.71to73 27
SOLDER PASTE
EC 302.71to73 28
SMD SOLDERING METHODS
They are
• Reflow soldering
• Infrared reflow
• Vapour-phase reflow
• Hot air reflow
• Hot gas soldering
• Laser soldering
EC 302.71to73 29
CLEANING OF SOLDERED JOINTS
EC 302.71to73 30
Reworking defective SMD components
Defective surface mount components can be repaired in two
ways:
by using soldering irons (depends on the kind and
amount of connections)
or using a professional rework system.
EC 302.71to73 31
Reworking defective SMD components
EC 302.71to73 32
Methods of applying the Adhesive
• Pin Transfer.
• Pressure Syringe Transfer.
• Screen Transfer.
EC 302.71to73 33
EC 302.71to73 34
Q1).Advantage of SMT over the older
through-hole technique is-----------
EC 302.71to73 35
Q2). Disadvantage of SMT over the older
through-hole technique is----------
EC 302.71to73 37
Frequently asked Questions
EC 302.71to73 38
summary
We have discussed the following
Placing SMDs
Soldering methods
EC 302.71to73 39