Documente Academic
Documente Profesional
Documente Cultură
The Centre Lathe is used to manufacture cylindrical shapes from a range of materials including; steels and plastics. Components that assemble to make an car engine work have been made using lathes. The Lathe may be operated by people (manual lathes) or computer controlled lathes (CNC machines) that have been programmed to carry out a particular task.
Lathe parts
Headstock
Holds lathe spindle and gears Chuck is fitted to spindle Spindle is hollow for long bars
Lead screw
Used when screw cutting on the lathe
Lathe Parts
Three Jaw Chuck
Self centring
Holds round and hexagonal work 3 jaws are connected Jaws are stamped 1,2 & 3 and fitted in order Chuck key used to open
Cutting Tools
Can be High Speed Steel held in tool holders Can be also Ceramic (Tungsten carbide) bits held directly in toolpost
Cutting tools
We can put different shapes on the High speed tool bits to cut different shapes on the workpiece
Lathe operations
Facing off
Parallel Turning
Parallel Turning
Parallel Turning
The tool moved parallel to the work and cylindrical shapes are formed
Parallel Turning
The student can Parallel turn the work on the lathe manually or use the automatic traverse option
Facing off
The tool is moved at right angles to the work using the cross slide Flat surfaces are produced
Knurling
A knurling tool is used to press a pattern onto a round section. The pattern is normally used as a grip for a handle. This provide a grip for the round part e.g. Screwdriver
Knurling
If the student wants to cut off the part they have turned, they can use the hacksaw and a vice or use the parting off tool on the lathe.
Parting off
CNC Lathes
In Industry it is not efficient or profitable to make everyday products by hand. On a CNC machine it is possible to make hundreds of the same item in a day. First a design is drawn using design software, then it is processed by the computer and made using the CNC machine. In industry, CNC machines can be extremely large.
LATHE OPERATIONS
Producing a Flat Surface
Taper Turning
Drilling on a Lathe