Documente Academic
Documente Profesional
Documente Cultură
CAPACITOR
A device for introducing a capacitive reactance in a circuit to counteract the effects of inductive reactance It reduces the impedance of a circuit with a consequent reduction in the voltage drop and an improvement in the PF By reducing the current required to supply a load, it decreases losses in a circuit
Connected in series with the line Used to compensate for the reactive voltage drop in the circuit Typically used in low-voltage, heavy-current applications such as furnaces & welders, to compensate for the voltage drop in the conductors
Connected in parallel with the load Used to correct the component of current caused by inductive Typically used for PF correction
- due to PF improvement
kVA2
kVA1
2. Voltage Rise
3. Loss Reduction
6. KVAR
7. Temperature
SIZE (KVAR)
1800 600 600 600 600
CAPACITOR CONNECTION
Ungrounded-Wye Ungrounded-Wye Ungrounded-Wye Grounded-Wye Ungrounded-Wye
capacitor bank must be allowed to stand at least five (5) minutes after disconnecting from source of power, after which it shall be short-circuited and grounded before work is started.
circuits & below, opening of FCOs shall be done with the use of load buster opening of FCOs shall be done only when the line is de-energized
1. The oil switch is manually operated by means of the red handle under the sleet hood. Pulling down the handle will either open or close the switch depending upon its previous position. 2. A disc-type contact-position indicator shows the switch position.
Nominal System Voltage Rated Maximum Voltage Rated Momentary Current Rated Making Current Capacitive Continuous Current
The oil is manually opened & closed by operating the yellow handle under the sleet hood.