Documente Academic
Documente Profesional
Documente Cultură
Prepared by: ASPILI, Alleli A. BSBAMM2A Submitted to: Mrs. Anita Orteza
Volcano
Volcano
A volcano is an opening, or rupture, in a planet's surface
or crust, which allows hot, molten rock, ash, and gases to escape from below the surface.
A volcano is mountain or hill formed by the accumulation
of materials erupted through one or more openings (called volcanic vents) in the Earth's surface. The term volcano can also refer to the vents themselves. Most volcanoes have steep sides, but some can be gently sloping mountains or even flat tablelands, plateaus, or plains.
Etymology
Volcano is thought to derive from Vulcano, a volcanic
island in the Aeolian Islands of Italy whose name in turn originates from Vulcan, the name of a god of fire in Roman mythology. The study of volcanoes is called volcanology, sometimes spelled vulcanology.
The Roman name for the island Vulcano has contributed the word for volcano in most modern European
languages.
Volcano
Volcanoes are generally found where tectonic plates are diverging or converging. A mid-oceanic ridge, for example the Mid-Atlantic Ridge, has examples of volcanoes caused by "divergent tectonic plates" pulling apart; the Pacific Ring of Fire has examples of volcanoes caused by "convergent tectonic plates" coming together.
Plate Tectonics
Plate Tectonics
Plate Tectonics, theory that the outer shell of the earth is
Plate Tectonics
Plate tectonics arose from an earlier theory proposed by German scientist Alfred Wegener in 1912. Looking at the shapes of the continents, Wegener found that they fit together like a jigsaw puzzle. Using this observation, along with geological evidence he found on different continents, he developed the theory of continental drift, which states that todays continents were once joined together into one large landmass.
Tectonic Plates
A tectonic plate (also called lithospheric plate) is a massive,
Tectonic Plates
Tectonic plates are made of either oceanic or continental
crust and the very top part of the mantle, a layer of rock inside
the earth. This crust and upper mantle form what is called the lithosphere. Under the lithosphere lies a fluid rock layer called
Continental Crust
The earths solid surface is about 40 percent continental crust. Continental crust is much older, thicker and less dense than oceanic crust. The thinnest continental crust, between plates that are moving apart, is about 15 km (about 9 mi) thick. In other places, such as mountain ranges, the crust may be as much as 75 km (47 mi) thick. Near the surface, it is composed of rocks that are felsic (made up of minerals including feldspar and silica). Deeper in the continental crust, the composition is mafic (made of magnesium, iron, and other minerals).
Oceanic Crust
Oceanic crust makes up the other 60 percent of the earths solid surface. Oceanic crust is, in general, thin and dense. It is constantly being produced at the bottom of the oceans in places called midocean ridgesundersea volcanic mountain chains formed at plate boundaries where there is a build-up of ocean crust. This production of crust does not increase the physical size of the earth, so the material produced at mid-ocean ridges must be recycled, or consumed, somewhere else. Geologists believe it is recycled back into the earth in areas called subduction zones, where one plate sinks underneath another and the crust of the sinking plate melts back down into the earth. Oceanic crust is continually recycled so that its age is generally not greater than 200 million years. Oceanic crust averages between 5 and 10 km (between 3 and 6 mi) thick.
Mid-Atlantic Ridge
The Mid-Atlantic Ridge is an underwater mountain range created at a divergent plate boundary in the middle of the Atlantic Ocean. It is part of a worldwide system of ridges made by seafloor spreading. The Mid-Atlantic Ridge is currently spreading at a rate of 2.5 cm per year (1 in per year). The mid-ocean ridges today are 60,000 km (about 40,000 mi) long, forming the largest continuous mountain chain on earth. Earthquakes, faults, underwater volcanic eruptions, and vents, or openings, along the mountain crests produce rugged seafloor features, or topography.
an oceanic plate descends beneath another oceanic plate. Chains of active volcanoes develop 100 to 150 km (60 to 90 mi) above the descending slab as magma rises from under the plate. Also, where the crust slides down into the earth, a trench forms. Together, the volcanoes and trench form an intra-oceanic island arc and trench system.
A Volcanos Structure
Structure of a Volcano
A volcano constitutes a vent, a pipe, a crater, and a cone. The vent is an opening at the Earth's surface. The pipe is a passageway in the volcano in which the magma rises through to the surface during an eruption. The crater is a bowl-shaped depression at the top of the volcano where volcanic materials like, ash, lava, and other pyroclastic materials are released.
Solidified lava, ashes, and cinder form the cone. Layers of lava, alternate with layers of ash to build the steep sided cone higher and higher.
Structure of a Volcano
Types of Volcano
Cinder Cones
Cinder cones are the simplest type of volcano. They are
built from particles and blobs of congealed lava ejected from a single vent. As the gas-charged lava is blown violently into the air, it breaks into small fragments that solidify and fall as cinders around the vent to form a circular or oval cone. Most cinder cones have a bowlshaped crater at the summit and rarely rise more than a thousand feet or so above their surroundings.
Cinder Cones
A cinder cone is a steep conical hill formed above a
Cinder Cones
Cinder cones grow rapidly and soon approach their
(short) life. When the position of the vent alters, aligned, twin
or secant cones develop. Nested , buried or breached cones are formed when the power of the eruption varies.
Cinder Cone
A great example of a cinder cone is Paricutn in Mexico. It was born in February 20, 1943 in a corn field and grew to 300 feet in 5 days.
Composite Volcano
Composite volcanoes, also called strato volcanoes, are
Composite Volcano
Composite volcanoes usually erupt in an explosive way. This is usually caused by viscous magma. When very viscous magma rises to the surface, it usually clogs the crater pipe, and gas in the crater pipe gets locked up. Therefore, the pressure will increase resulting in an explosive eruption.
Composite Volcano
Most composite volcanoes have a crater at the summit which contains a central vent or a clustered group of vents. Lavas either flow through breaks in the crater wall or issue from fissures on the flanks of the cone. Lava, solidified within the fissures, forms dikes that act as ribs which greatly strengthen the cone. The essential feature of a composite volcano is a conduit system through which magma from a reservoir deep in the Earth's crust rises to the surface. The volcano is built up by the accumulation of material erupted through the conduit and increases in size as lava, cinders, ash, etc., are added to its slopes.
Composite Volcano
When a composite volcano becomes dormant, erosion begins
A. Magma, rising upward through a conduit, erupts at the Earth's surface to form a volcanic cone. Lava flows spread over the surrounding area. B. As volcanic activity continues, perhaps over spans of hundreds of years, the cone is built to a great height and lava flows form an extensive plateau around its base. During this period, streams enlarge and deepened their valleys. C. When volcanic activity ceases, erosion starts to destroy the cone. After thousands of years, the great cone is stripped away to expose the hardened "volcanic plug" in the conduit. During this period of inactivity, streams broaden their valleys and dissect the lava plateau to form isolated lava-capped mesas. D. Continued erosion removes all traces of the cone and the land is worn down to a surface of low relief. All that remains is a projecting plug or "volcanic neck," a small lava-capped mesa, and vestiges of the once lofty volcano and its surrounding lava plateau.
Composite Volcanoes
Mount Fuji, an active
stratovolcano in Japan that last erupted in 1707-08
Composite Volcanoes
Popocatpetl, an
active stratovolcano in Mexico
Shield Volcanoes
Shield volcanoes, the third type of volcano, are built almost
entirely of fluid lava flows. Flow after flow pours out in all
directions from a central summit vent, or group of vents, building a broad, gently sloping cone of flat, domical shape,
Shield Volcanoes
Shield volcanoes may be produced by hot spots which
lay far away from the edges of tectonic plates. Shields also occur along the mid-oceanic ridge, where sea-floor spreading is in progress and along subduction related volcanic arcs.
The eruptions of shield volcanoes are characterized by low - explosivity lava - fountaining that forms cinder
Shield Volcanoes
Mauna Loa Volcano, Hawaii, a giant among the active volcanoes of the world; snow-capped Mauna Kea Volcano in the distance.
Volcanic Eruption
An eruption begins when pressure on a magma chamber
forces magma up through the conduit and out the volcano's vents. When the magma chamber has been completely filled, the type of eruption partly depends on the amount of gases and silica in the magma. The amount of silica determines how sticky (level of viscosity) the magma is and water provides the explosive potential of steam.
Volcanic Eruption
1. low water, low silica - runny lava flows (not viscous) 2. low water, high silica (very viscous) - pasty lava - often building domes
Illustrations
1.
2.
3.
4.
Volcanic Activity
Scientists usually consider a volcano to be active if it is currently erupting or showing signs of unrest, such as unusual earthquake activity or significant new gas emissions. Many scientists also consider a volcano active if it has erupted in historic time. It is important to note that the span of recorded history differs from region to region. Extinct volcanoes are those that scientists consider unlikely to erupt again, because the volcano no longer has a lava supply.
Volcanic Terms
Volcanic Ash
Volcanic ash consists of rock, mineral, and volcanic
Caldera
A caldera is a large, usually circular depression at the summit of a
Lahar
Lahar is an Indonesian word for a rapidly flowing mixture
of rock debris and water that originates on the slopes of a volcano. Lahars are also referred to as volcanic mudflows or debris flows.
Lava
Lava is molten rock expelled by a volcano during an eruption.
Lava is the word for magma (molten rock) when it erupts onto the Earth's surface. Geologists also use the word to describe the solidified deposits of lava flows and fragments hurled into the air by explosive eruptions (for example, lava bombs or blocks)
Magma
Magma is molten or partially molten rock beneath the Earth's
Pyroclastic Flow
A pyroclastic flow is a ground-hugging avalanche of hot ash,
pumice, rock fragments, and volcanic gas that rushes down the side
of a volcano as fast as 100 km/hour or more. The temperature within a pyroclastic flow may be greater than 500 C, sufficient to burn and carbonize wood. Once deposited, the ash, pumice, and rock fragments may deform (flatten) and weld together because of the intense heat and the weight of the overlying material.
Pyroclastic Flow
Pyroclastic flows descend the south-eastern flank of Mayon Volcano, Philippines. Maximum height of the eruption column was 15 km above sea level, and volcanic ash fell within about 50 km toward the west. There were no casualties from the 1984 eruption because more than 73,000 people evacuated the danger zones as recommended by scientists of the Philippine Institute of Volcanology and Seismology.
Rift Zone
A rift zone is an elongate system of crustal fractures
associated with an area that has undergone extension (ground has spread apart).
Tephra
Tephra is a general term for fragments of volcanic rock
and lava regardless of size that are blasted into the air by explosions or carried upward by hot gases in eruption columns or lava fountains. Tephra includes large dense blocks and bombs, and small light rock debris such as scoria, pumice, reticulite, and ash.
Vent
Vents are openings in the Earth's crust from which
molten rock and volcanic gases escape onto the ground or into the atmosphere. Vents may consist of a single circular-shaped structure, a large elongate fissure and fracture, or a tiny ground crack.
Earthquake
Earthquake
Earthquake, shaking of the Earths surface caused by rapid movement of the Earths rocky outer layer. Earthquakes occur when energy stored within the Earth, usually in the form of strain in rocks, suddenly releases. This energy is transmitted to the surface of the Earth by earthquake waves. Earthquake is also known as tremor or tremble.
Earthquake
A shaking or trembling of the crust of the earth, caused by underground volcanic forces or by breaking and shifting of rock beneath the surface. A series of vibrations induced in the earth's crust by the abrupt rupture and rebound of rocks in which elastic strain has been slowly accumulating.
Anatomy of an Earthquake
Parts of Earthquake
Earths surface directly above the focus is called the epicenter. Earthquake
waves begin to radiate out from the focus and subsequently form along the fault rupture. If the focus is near the surfacebetween 0 and 70 km (0 and 40 mi) deepshallow-focus earthquakes are produced. If it is intermediate
or deep below the crustbetween 70 and 700 km (40 and 400 mi) deepa
deep-focus earthquake will be produced. Shallow-focus earthquakes tend to be larger, and therefore more damaging, earthquakes. This is because they are closer to the surface where the rocks are stronger and build up more
strain.
Faults
In geology a fault, or fault line, is a planar fracture in
rock in which the rock on one side of the fracture has moved with respect to the rock on the other side.
A fault is a break in the rocks that make up the Earths
crust, along which rocks on either side have moved past each other.
Types of Faults
Normal Fault
The normal fault is not necessarily normal in the sense
that it is common because it is not the most common of faults. However what is normal about them is that their movement tends to follow the gravitational pull on the fault blocks involved. The fault plane on the normal fault is generally very steep.
Normal Fault
In a normal fault the two involved blocks are (by gravity) pulling away from one another causing one of the fault blocks to slip upward and the other downward with respect to the fault plane (it is hard to determine whether both or just one block has moved.). The exposed upward block forms a cliff-like feature known as a fault scarp. A scarp may range from a few to hundreds of meters in height and their length may continue for 300 or more kilometers (around 200 miles).
Normal Fault
Fault-line scarp of normal fault in Andes. Gneissic mylonites sample from this exposure. Represents exposure of a type of core complex (photo by Glenn Wallace).
Normal Fault
A normal fault in Cretaceous strata west of Pueblo, Colorado. Note that the overlying Quaternary gravels are not cut by the fault.
Reverse Fault
The reverse fault is a normal fault except the general
Reverse Fault
This is a small reverse fault in a road cut in Japan Reverse fault (left of center) in marble, Brazil.
Thrust Fault
A thrust fault is a type of fault, or break in the Earth's crust with
Thrust Fault
vertical and the footwall moves either left or right or laterally with very little vertical motion. Strike-slip faults with left-lateral motion are also known as sinistral faults. Those with right-lateral motion are also known as dextral faults. A special class of strike-slip faults is the transform faults which are a plate tectonics feature related to spreading centers such as midocean ridges.
One of the United States's most famous, the San Andreas Fault, a right-lateral strike-slip fault; it caused the massive 1906 San Francisco Earthquake.
P wave
Earthquake shaking and damage is the result of three basic types of
elastic waves. The faster of these body waves is called the primary
or P wave. Its motion is the same as that of a sound wave in that, as it spreads out, it alternately pushes (compresses) and pulls (dilates) the rock. These P waves are able to travel through both solid rock, such as granite mountains, and liquid material, such as volcanic magma or the water of the oceans.
P wave
S wave
The slower wave through the body of rock is called the
S wave
P and S wave
The actual speed of P and S seismic waves depends on the density
and elastic properties of the rocks and soil through which they pass.
In most earthquakes, the P waves are felt first. The effect is similar to a sonic boom that bumps and rattles windows. Some seconds later, the S waves arrive with their up-and-down and side-to-side motion, shaking the ground surface vertically and horizontally. This is the wave motion that is so damaging to structures.
Surface Wave
The third general type of earthquake wave is called a surface wave, reason being is that its motion is restricted to near the ground surface. Such waves correspond to ripples of water that travel across a lake. Two types of Surface Wave:
Love Wave Rayleigh Wave
Love Wave
The first is called a Love wave. Its motion is essentially that of S waves that have no vertical displacement; it moves the ground from side to side in a horizontal plane but at right angles to the direction of propagation. The horizontal shaking of Love waves is particularly damaging to the foundations of structures.
Rayleigh Wave
The second type of surface wave is known as a Rayleigh wave. Like
rolling ocean waves, Rayleigh waves wave move both vertically and
horizontally in a vertical plane pointed in the direction in which the waves are traveling.
Surface wave
Surface waves travel more slowly than body waves (P and S); and
of the two surface waves, Love waves generally travel faster than
Rayleigh waves. Love waves (do not propagate through water) can effect surface water only insofar as the sides of lakes and ocean
Earthquake Measurement
Richter Scale
The magnitude of most
earthquakes is measured on the Richter scale, invented by Charles F. Richter in 1934. The Richter magnitude is calculated from the amplitude of the largest seismic wave recorded for the earthquake, no matter what type of wave was the strongest.
Richter Scale
The Richter magnitudes are based on a logarithmic scale (base 10).
What this means is that for each whole number you go up on the Richter scale, the amplitude of the ground motion recorded by a
seismograph goes up ten times. Using this scale, a magnitude 5 earthquake would result in ten times the level of ground shaking as a
no upper limit, so it can describe earthquakes of unimaginable and (so far) unexperienced intensity, such as magnitude 10.0 and beyond.
Richter Magnitudes
Descri ption
Earthquake Effects
Frequency of Occurrence
Micro
Minor 3.0-3.9 4.0-4.9 Light Modera te Strong Major Often felt, but rarely causes damage. Noticeable shaking of indoor items, rattling noises. Significant damage unlikely. Can cause major damage to poorly constructed buildings over small regions. At most slight damage to well-designed buildings. Can be destructive in areas up to about 160 kilometres (100 mi) across in populated areas. Can cause serious damage over larger areas. Can cause serious damage in areas several hundred miles across. Devastating in areas several thousand miles across. Never recorded; see below for equivalent seismic energy yield.
5.0-5.9
6.0-6.9 7.0-7.9 8.0-8.9
Great
9.0-9.9 10.0+ Epic
Effects of Earthquakes
Shaking and ground rupture Shaking and ground rupture are the main effects created by earthquakes, principally resulting in more or less severe damage to buildings or other rigid structures. The severity of the local effects depends on the complex combination of the earthquake magnitude, the distance from epicenter, and the local geological and geomorphological conditions, which may amplify or reduce wave propagation. The groundshaking is measured by ground acceleration.
Fires Following an earthquake, fires can be generated by break of the electrical power or gas lines. In the event of water mains rupturing and a loss of pressure, it may also become difficult to stop the spread of a fire once it has started. Soil liquefaction Soil liquefaction occurs when, because of the shaking, water-saturated granular material (such as sand) temporarily loses its strength and transforms from a solid to a liquid. Soil liquefaction may cause rigid structures, as buildings or bridges, to tilt or sink into the liquefied deposits. This can be a devastating effect of earthquakes.
Tsunami
Tsunamis are long-wavelength, long-period sea waves produced by an sudden or abrupt movement of large volumes of water. In the open ocean, the distance between wave crests can surpass 100 kilometers, and the wave periods can vary from five minutes to one hour. Such tsunamis travel 600-800 kilometers per hour, depending on water depth. Large waves produced by an earthquake or a submarine landslide can overrun nearby coastal areas in a matter of minutes. Tsunamis can also travel thousands of kilometers across open ocean and wreak destruction on far shores hours after the earthquake that generated them.
Ordinarily, subduction earthquakes under magnitude 7.5 on the Richter scale do not cause tsunamis. However, there have been recorded instances, yet most destructive tsunamis are caused by magnitude 7.5 plus earthquakes. Tsunamis are distinct from tidal waves, because in a tsunami, water flows straight instead of in a circle like the typical wave. Earthquaketriggered landslides into the sea can also cause tsunamis.
Floods A flood is an overflow of any amount of water that reaches land. Floods usually occur because of the volume of water within a body of water, such as a river or lake, exceeds the total capacity of the formation, and as a result some of the water flows or sits outside of the normal perimeter of the body. However, floods may be secondary effects of earthquakes, if dams are damaged. Earthquakes may cause landslips to dam rivers, which then collapse and cause floods. Human impacts Earthquakes may result in disease, lack of basic necessities, loss of life, higher insurance premiums, general property damage, road and bridge damage, and collapse of buildings or destabilization of the base of buildings which may lead to collapse in future earthquakes. Earthquakes can also lead to volcanic eruptions, which cause further damages such as substantial crop damage, like in the "Year Without a Summer" (1816). Most of civilization agrees that human death is the most significant human impact of earthquakes.
Earthquake Terms
Intensity
A measure of severity of shaking at a particular site. It is usually estimated from descriptions of damage to buildings and terrain. The intensity
Magnitude
A numerical expression of the amount of energy released by an
Seismicity:
Seismograph:
A sensitive instrument that can detect, amplify, and record ground vibrations too small to be perceived by human beings. (Noson, et.al., 1988)
An instrument that records the motions of the Earth, especially earthquakes. (USGS National Earthquake Information Center, 1999) A scientific instrument that detects and records vibrations (seismic waves) produced by earthquakes. (Teacher's Packet) Seismograph station: A site at which one or more seismographs are set up and routinely monitored. (USGS National Earthquake Information Center, 1999) Seismologist: A scientist who studies earthquakes. (USGS National Earthquake Information Center, 1999) Seismometry: The instrumental aspects of seismology. (USGS National Earthquake Information Center, 1999)
End
Project References
http://encarta.msn.com http://vulcan.wr.usgs.gov/Glossary/Seismicity/earthquake_terminology.html http://en.wikipedia.org/wiki/ http://www.geo.mtu.edu/UPSeis/intensity.html http://www.google.com.ph USGS National Earthquake Information Center, 1999
http://www.tinynet.com/faults.html
http://allshookup.org/quakes/wavetype.htm