Documente Academic
Documente Profesional
Documente Cultură
To start with,
homes built with steel have straighter walls and fewer cracks than homes built with wood. In addition, steel is dimensionally stable and won't warp, rot buckle, or split, providing substantial savings in long-term maintenance and energy costs and higher resale values. Steel is the ideal building material for these environmentally conscious times. It is nontoxic and 100% recyclable! Click to edit Master subtitle style
5/8/12
Generally there are two types of steel bars ("Sariya" in Hindi)available in the Click to edit Master subtitle style market. Mild steel bars
5/8/12
5/8/12
5/8/12
or
Percentmin imum
3.
MediumTen sile Steel Grade-75 for bars up to 16mm 540 350 340 20 20
330
20
5/8/12
5/8/12
5/8/12
Steel bars are clear, free from loose mil scales, dust and loose rust coats of paints, oil or other coatings which may destroy or reduce bond strength. Steel bars should be stored in such a way as to avoid distortion and to prevent deterioration and corrosion. Steel bars should not be clean by oily
5/8/12
The cranks in the bar at the end should be kept in position by using spots. The steel bars should not be disturbed while lying cements concrete. Required cover under steel bars should be given before laying the cement concrete. No over lap is given in the bar having 5/8/12 a diameter more than 36 mm, if
5/8/12
M S Steel round & square Bar Sr.No. Dia of steel Weight per bar meter Round Bar a. b. c. d. e. 6 mm 8 mm 10 mm 12 mm 16 mm 0.22 Kg. 0.39 Kg 0.62 Kg 0.89 Kg 1.58 Kg Square Bar 0.28 Kg 0.50 Kg 0.78 Kg 1.13 Kg 2.01 Kg
5/8/12
f. g. h. i. j. k. l. m.
20 mm 25 mm 28 mm 32 mm 36 mm 40 mm 45 mm 50 mm
5/8/12
STANDARD
The coated sheet steel used in the manufacture of steel studs and joints must meet very specific material standards. Most commonly, ASTM A653 standard specification for structural qualityClick to editsheet (replacing style A446) is used to ensure cold rolled Master subtitle ASTM the sheet steel is suitable for structural applications.
5/8/12
THICKNESS
Steel is available in many different thicknesses and strength levels. The common design thicknesses are 0.018, 0.033, 0.036, 0.044, 0.048, 0.060, 0.075, and 0.105 inches (exclusive of any metallic coatings). It is important to specify sheet thickness by the decimal thickness to guarantee a minimum thickness Click to edit Master subtitle style of delivered product.
5/8/12
STRENGTH
The sheet steel can be supplied in different strength levels to meet the structural requirements of the project. In general, for load bearing product it is common to use material with a yield strength of 33 ksi for thicknesses up to 0.048 inches. For material in thicknesses 0.060 inches and greater, a 50 ksi yield Click to edit common. strength material isMaster subtitle style
5/8/12