Documente Academic
Documente Profesional
Documente Cultură
RAW MATERIAL: zinc coated steel wire with medium, or high Carbon content. Chemical composition of steel: according to EN 10016-2-1994. Mass of zinc coating: according to EN10244-2-2001, DIN 2078/1990 TECHNICAL CONDITIONS: in accordance with the works specification and to the customers requirements. APPLICATION: in telecommunications, constructions.
Fora de rupere minim Breaking force, min. daN Rezistena de rupere la traciune a srmei, min. Wire tensile strength, min. 157 daN/mm 177 daN/mm 197 daN/mm Densitatea liniar Linear density
5% g/m
1 x 19 x d
1.00 1.25 1.35 1.50 1.75 1.95 2.00 2.10 2.25 2.60 3.00
0.10
0.15
0.20 0.25 0.27 0.30 0.35 0.39 0.40 0.42 0.45 0.52 0.60
0.007
0.01
0.015
85 133 154 192 261 323 342 377 432 576 768
96 150 175 217 294 365 386 425 486 649 866
104 166 192 239 323 401 424 469 536 715 954
4.76 7.44 8.68 10.72 14.59 18.12 19.06 21.01 24.12 32.21 42.88
7x4xd
2.00
0.10
0.28
+0.010 -0.015
242
273
304
13.73
7 x 19 x d
3.75
0.20
0.25
0.015
881
995
1097
51.95
AMBALARE. LIVRARE. Cablurile portante din oel se livreaz pe bobine metalice BS 40, BS 60, sau pe virole din carton tip Z2. Lungimile pe bobina se pot realiza n funcie de cerinele clientului.
Bobin / Spool
Lungime pe bobin Length per spool Tolerana Tolerance
PACKING. DELIVERY. Steel suspanding cables are delivered on metallic spools BS 40, BS60 or Z2 reelless coils.
BS40 BS60
255 118 166 152 17 2 x 13 38 255 118 166 152 33 3 x 13 43
K L M N O
Diametrul flanei / Diameter of flange (mm) Diametrul tamburului / Diameter of barrel (mm) Distana exterioar ntre flane / Overall width (mm) Distana interioar ntre flane / Traverse (mm) Diametrul gurii de centrare / Bore diameter (mm) x diametrul gurilor de antrenare / P Numrul Number x diameter of drive hole (mm) Distana dintre gaura de antrenare i gaura de centrare / Q Distance drivehole/bore (mm)
1 BIS, Aleea INDUSTRIILOR Str., 120068 BUZU ROMANIA TEL:+40 238 722037 FAX:+40 238 722035 E-MAIL: office@cord.ro www.cord.ro