Documente Academic
Documente Profesional
Documente Cultură
Increased exhaust emissions Reduced engine performance (Power, Torque) Increased fuel consumption Poor driveability situations Direct injection systems failure (Leaks, Pressure drop) Rough idle and periodic stall of the engine Conditions that lead to long-term catalytic converter damage Extended engine start-up MIL - check engine light-up.
The efficient and cost-effective way to bench test and service every fuel injector.
A-8000
A-4040
u application
GDI / FSI / HPI DISI / SIDI (Direct injection) MPFI / SPFI / L-JETRONIC (Multi-port fuel injection) CSFI / CPFI (Central port injection) TBI / CFI (Throttle body injection) K-JETRONIC (Continuous Injection) Other: Marines, Motorcycles, LPG, Alternative fuels
u features
Ultrasonic Device
Ultrasound waves interact through a special fluid to provide safe & detailed cleaning of fuel injector components.
u features
Injector Accessories
Injector components are continuously defecting from dirty fuel and air supply and high engine temperatures. CARBON ZAPP offers a wide range of: o-rings, filters, caps, retainers and grommets. for the complete service of the injectors.
GDI Capable Spray test Volume test Automatic function Variable and customizable test-plans Repeatability Reverse flushing Adaptability On-display guide Fast mounting Ease of use Quality and robust
Portable Stand
u features
Spray Chambers
Illuminated spray chambers (high intensity LEDs) for clear view of pattern. Unique operation programs for static spray test. Diagnosis of: incorrect spray pattern, leaky or seized injectors
Volumetric Tubes
Graduated tubes for efficient diagnosis of: uneven flow rates, weak or defective nozzle spring. Automatic drainage after each test
A-2040
Reverse Flushing
Device for cleaning water particles and ultrasonically cleaned deposits.
Adapters
u
Standard Kit
Set of Fuel Rail & Adapters for all makes and types of Top-Feed Injectors
u
TBI Kit
Set of Fuel Rail & Adapters for all makes and types of throttle body injectors (Side-Feed)
u
Exclusive Kit
Complete set of Fuel Rail & Adapters, special designed for simple adaptation to all makes and types of Top-Feed, throttle body and Side-Feed Injectors.
Technical Specifications
standard optional V not applicable
Testing and cleaning HPI, FSI, GDI Testing and cleaning MPFI, TBI Testing and cleaning LPG, MARINE, MOTORCYCLES Testing and cleaning CIS Saturated Switch driver automatic selection Peak & Hold driver automatic selection Piezo injector driver upgradeable High intensity Led lighting Variable angle lighting Automatic functions Manual functions (semi-auto) User-programmable sector Spray patterns Spray Atomization Step-by-step instructions (LCD) Future upgrades Automatic draining of volumetric tubes Acceleration/ Deceleration mode simulation test Rich/ Lean mode simulation test Electric coil condition and () Ohm testing Operating pressure (Kpa / 10Kpa = 1Bar) Automatic adjustment of Pressure to system tested Injector operating frequency (rpm in 100rpm increments) Injector pulse width (ms in 0.1ms increments) Operating time (Adjustable 5seconds - 20minutes) Injector pulses Dynamic and Static tests Dynamic and Static tests for G-Di, FSI, HPI systems Volumetric measurement in graduated glass tubes (ml with 2% tol.) Language localization Diagnose Uneven injector flow rates (clogged) Diagnose Bad injector spray pattern Diagnose Leaky or seized injectors Diagnose Injector coil electrical failures Diagnose Weak or defective injector nozzle springs Standard Adapters (top feed injectors adapters kit) TBI adapters Kit (throttle body and side feed injectors adapters kit) Exclusive Adapters (All top & side feed injectors easy adapters kit) UB15e Ultrasonic bath exclusive (Automatic, Sweep technology 31-42kHz, Degas, Heat control) UB15s Ultrasonic bath Standard (Semi-Automatic, 42Khz, Heat control) Input power (Volts) / Power Consumption (Watt) Operating Frequency (Hz) Packaged Dimensions WxDxH (cm) / Weight (Kg) Consumable Fluids (testing & cleaning) Injector Accessories Kit
0-100
0-100
0-100
V V
V V
V V
V V
V V
0-90
V V
0-90
V
500-9999 0.9-80
V
500-9999 0.9-80
500-16,000 0.9-100
500-16,000 0.9-100
500-16,000 0.9-100
500-16,000 0.9-100
1-10,000
1-10,000
1-10,000
1-10,000
1-130
1-130
1-130
1-130
V
1-130
V
1-130
100-240 / 320 50 / 60 51x43x67 / 38
100-240 / 320 50 / 60 67x44x72 / 49
V
100-240 / 320 50 / 60 60x44x55 / 31
V
100-240 / 320 50 / 60 60x44x55 / 34
V V
V
100-240 / 320 50 / 60 51x43x67 / 48
V
100-240 / 320 50 / 60 67x44x72 / 60
SMALL PORTABLE STAND
LARGE PORTABLE STAND
Technical Specifications
Application / Machine Packaged Dimensions WxDxH (cm) / Weight (Kg) Input power (Volts) / Total Power Consumption (Watt) Dimensions and weight values are subject to change without notice
UB15s
A2040 / A4040 / A8000 21x20x25 / 2.5 100-240 / 350
UB15e
A2040 / A4040 / A8000 23x29x28 / 3 100-240 / 250
A8000 67x53x83 / 40
CARBON ZAPP
tel
info@CarbonZapp.com www.CarbonZapp.com
fax +30