Q
Reliance
POLYMERS
F4600 HIGH DENSITY POLYETHYLENE
BLOW MOULDING & BLOWN FILM GRADE
F46003 is a High Density Polyethylene grade sultable for general purpose blown film & extrusion blow moulding applications. Articles
blown fram this grade exhibit moderate to goodstifiness. The resin offers good meltstrength, ESCR andimpactresistance.
‘Typical Characteristics
Property ‘Test Method Unit ‘Typical Value **
Density (23°C) ASTM DIS05 we 0.946
Melt Flow Index (190°C/2.16 kg) ASTM D 1238 g/l0 min 030
‘Tensile Strength at Yield (MDITD) ASTM D882 MPa 96
Ukimate Tensile Strength (MD/TD) ASTM D882 MPa 450
Elongation at break (MD/TD) ASTM D882 % 780/950
Dart Impact Strength, F50 ‘ASTM DIT03 wun 2
(38 mm Dart, 66 em height)
“Tear Strength (MD/TD) ASTMDIO22 wun O4aS
‘psalCharaceritcsandrotto be aken as specctns
peal values (chara) ih 40 ln made wth O75 mim gap 82.75 BUR,
Applications
Used for producing blown film and is recommended for use in carry bags and co-extruded film structures, General purpose blow
‘moulded containers
Regulatory Information
+ Meets the requirements stipulated in standard IS : 10146 on "Specification for Polyethylene for safe use in contact with foodstuffs,
pharmaceuticals, and drinking water". It also conforms to the positive lst of constituents as prescribed in IS : 10141. The grade
and the additives incorporated nitalso comply with the FOA:CFR Title 177.1520, Olefin polymers.
‘Storage Recommend:
+ Bags shouldbe storedin dry/closed conditionsat temperatures below 50°C and protected from UV direct sunlight,
7 T08. Emapamer peppers Wate wen
=e tn nd rv a an dew th oe Mi Nera gnine mrad nviigatroarc T
‘tipanaanéattentyoeso