Documente Academic
Documente Profesional
Documente Cultură
Nr.05 Editarea in AutoCAD
Nr.05 Editarea in AutoCAD
Șuletea A.
Obiective:
- Metode de selectare
- Comenzi de editare
- Construcții geometrice
- meniul Modify
- se tastează comanda sau aliasul
- Home tab → Modify
• Selectarea prin punctare (directă)
• Selectarea cu ajutorul ferestrelor și lasso implicite Crossing /Window
• Deselectarea – Remove (R ↵), poate fi înlocuită cu selectarea cu tasta Shift apăsată.
• Completarea setului Add ( A ↵)Indicarea explicită a tipului de fereastră: Window (W), Crossing
Window (C), Last (L), Previous (P), All (ALL), etc.
Command: _move
Select objects: S1↵
Specify base point or [Displacement] <Displacement>: P1
Specify second point or <use first point as displacement>:P2
Comenzi de editare
CTRL+C
CTRL+V
Comenzi de editare
Command: _rotate
Select objects:S1↵
Specify base point:P1
Specify rotation angle or [Copy/Reference] <0>: 45↵
Command: _rotate
Current positive angle in UCS:
ANGDIR=counterclockwise ANGBASE=0
Select objects S1
Select objects: ↵
Specify base point: A
Specify rotation angle or [Copy/Reference] <0>: R ↵
Command: _mirror
Select objects P1,P2
Specify first point of mirror line: P3
Specify second point of mirror line:P4
Erase source objects? [Yes/No] <N>: ↵
Command Trim
Select cutting edges
Select objects or <select all>–
selectează muchia tăietoare/sau ↵
Select object to trim or shift-select to
extend – selectează părţile obiectelor
ce urmează a fi retezate
Comenzi de editare
Command: _extend
Current settings: Projection=UCS, Edge=None
Select boundary edges ...
Select objects or <select all>: S1, S2
Select objects: ↵
Select object to extend or shift-select to trim or
[Fence/Crossing/Project/Edge/Undo]:S3,S4,S5
:
Comenzi de editare
Lengthen – modifică lungimea unei linii drepte sau a unui arc de cerc
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select an object or [DElta/Percent/Total/DYnamic]:
Command: _break
Select object:S1
Specify second break point or [First point]:S2
Command: _join
Select source object or multiple objects to join at once: 1 found
Select objects to join: 1 found, 2 total
Select objects to join:↵
2 lines joined into 1 line
Comenzi de editare
Command: SCALE
Command: _scale
Select objects: S1
Select objects: S1
Select objects:↵
Select objects: ↵
Specify base point:P1
Specify base point:P1
Specify scale factor or [Copy/Reference]: R ↵
Specify scale factor or [Copy/Reference]: 2 ↵ Specify reference length <1.0000>: P1
Specify second point:P2
Specify new length or [Points] <1.0000>:P3
Comenzi de editare
Command: _fillet
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or
[Undo/Polyline/Radius/Trim/Multiple]:R ↵
Specify fillet radius <0.0000>: 5↵
Select first object S1
Select second object S2
Comenzi de editare
Command: _chamfer
(TRIM mode) Current chamfer Dist1 = 0.0000, Dist2 = 0.0000
Select first line or
[Undo/Polyline/Distance/Angle/Trim/mEthod/Multiple]: D
Racordarea este unirea a două linii (drepte sau curbe) printr-o curbă tangentă
(de obicei, arc de cerc).
Racordare exterioară
Command: _fillet↵
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or
[Undo/Polyline/Radius/Trim/Multiple]: R↵
Specify fillet radius <0.0000>: 20↵
Select first object or
[Undo/Polyline/Radius/Trim/Multiple]:(se indică
primul cerc) P1
Select second object or shift-select to apply
corner or [Radius]:(se indică al doilea cerc) P2
Construcţii
Racordare interioară
Command: _circle↵
Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]: _ttr↵
Specify point on object for first tangent of circle:(se
indică primul cerc) P1
Specify point on object for 2second tangent of circle:(se
indică al doilea cerc)b P2
Specify radius of circle <269.3394>: 100↵
Command: _trim↵
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects or <select all>: (se selectează muchiile tăietoare)
P1, P2↵
Select object to trim or shift-select to extend or
[Fence/Crossing/Project/Edge/eRase/Undo]:
(se selectează muchiile ce urmează a se tăia) P3↵
Construcţii
Tangenta comună pentru două cercuri Dreaptă înclinată