Documente Academic
Documente Profesional
Documente Cultură
"
$"
#" "
ACRILIN V 5700
,& &
% & '()
Descriere
Description
Produsele ACRILIN V 5700 sunt vopsele monocomponente pe baza de rasina alchidicoacrilica.Buna rezistenta la intemperii, buna aderenta la suport, pelicule dure rezistente la
exploatare, foarte buna rezistenta la agenti chimici si produse petroliere.
ACRILIN V 5700 products are one- component paints based on alkyd -acrylic resins. Good
resistance to weatherings, good adherence to the substrate, hard films resistant to exploitation, very
good resistance to chemicals agents and petroleum products.
Utilizare
Recommended use
Sunt indicate ca strat intermediar si final in sistemele de protectie a reperelor din metal
care se exploateaza in mediu marin, in industria petroliera, industria chimica si industria
alimentara, care lucreaza in medii cu agresivitate clasa 1m -3 m.
Sunt recomandate pentru protejarea suprafetelor din metal, lemn, beton si alte elemente
de zidarie. Sunt utilizate pentru acoperirea suprafetelor noi, precum si pentru intretinerea
sau repararea suprafetelor care au mai fost vopsite.
Sunt utilizate:
-la protectia suprafetelor metalice, a instalatiilor destinate a functiona in conditii
climatice deosebite, atmosfera industriala mai putin agresiva.
-la protectia containerelor, a rezervoarelor, sa.
-la protectia urmatoarelor parti componente ale navelor in reparatie si in constructie :
suprastructurile exterioare (pereti, balustrade, hublouri, usi metalice exterioare), punti
interioare
-in sisteme de acoperiri protectoare la constructiile supraterane apartinind retelelor
electrice.
-utilaje pentru industria alimentara, medicamente, chimica, textila, constructii de masini ,
masini si utilaje diverse.
-confectii metalice diverse, poduri, macarale, structuri de rezistenta,sa.
They are recommended as intermediate and final coat in protective systems for metal parts
exploited in the marine environment, oil industry, chemical industry and food industry, which work in
environments with aggressiveness of 1m - 3 m class.
They are used for metallic, wood, concrete and other masonry elements surfaces protection.
They are used for coating of new surfaces and for the maintenance or repairing of previous painted
surfaces.
They are used for:
-protection of metallic surfaces, installations destined to function in special weather conditions, in
less agressive industrial atmosphere.
-protection of containers, tanks, etc.
-protection of the following components of the vessels in repair and in construction: exterior
superstructures (walls, handrails, portholes, exterior metallic doors), interior decks.
-in protective coating systems for overground constructions belonging to electric networks
-units for food, pharmaceutical, chemical, various machines and equipment.
-various metallic confections, bridges, cranes, resistance structures, etc.
Temperatura de lucru
90C max.
Sortimente
Se fabrica intr-o gama variata de culori si nuante conform cartelei proprii, cartelei
RAL 841GL sau conform mostrei furnizate de client.
Service temperature
Assortments
They are manufactured in various colour shades in accordance with the proper colour card,
RAL 841 GL colour card or with the purchasers sample.
"#$ % &
"
$"
#" "
ACRILIN V 5700
,& &
pag. 2/6
CARACTERISTICI TEHNICE
TECHNICAL DATA
Aspect
Mat
Finish
Mat
Luciu, 60
Gloss, 60
Volum de solide
Semimat
Semilucios
Semimat
Max.20% 20 -40
46% .
46%
Densitate, approx.
Specific gravity. at 20 C, g/ml
VOC
Volatile organic compound
Timp de curgere
1,22
Lucios
Semiglossy
1,15
Culori deschise
Light colours
max.470 g/l
max.450g/l
(39%)
(35%)
Culori inchise
Dark colours
max.520g/l
(42%)
vizual
Glossy
visual
30 -60%
46%
1,02
1,08
SREENISO 2811-1: 02
Culori deschise
Light colours
max.470g/l
(43,5%)
Culori inchise
Dark colours
max.550g/l
(52%)
max.470g/l
(42%)
SRENISO 3251:2003
SRENISO11890-1:2002
100 -140 s
(at 20 C, cup 4 mm)
100 s
Aderenta, grila de 2 mm
Uscare, approx.
Valabilitate in ambalaj
Flow time
IL-DC-09
SREN ISO 1522 : 2002
SREN ISO 2409 :2003
ASTMD 1640-2003
60 minutes
120 minutes
8 months from the production date, with the observance of the storage and packing
provisions.
Depending on the storage conditions, it is recommended to stir the product before use.
DETALII DE APLICARE
APPLICATION DETAILS
Metoda de aplicare
pensulare / roluire
pulverizare aer
imersie
Presiune
3 - 4 atm.
Diametru duza
1.8 - 2.5 mm
Curatare instrumente
D 553 thinner
85 m approx.
40 m approx.
Application method
Thinner / Thinning
Pressure
Nozzle orifice
Cleaning of tools
air spraying
dipping
"#$ % &
"
$"
#" "
ACRILIN V 5700
Interval de reacoperire
,& &
pag.3/6
Consumpractic
Practical spreading rate
Re-coating interval
Consum teoretic
Practical spreading rate depends on the application conditions (surface geometry, application
method, environmental conditions) and can be 1.2 - 1.5 x theoretical spreading rate.
Observatie
Remark
PREGATIREA
SUPRAFETEI
SURFACE
PREPARATION
CONDITII DE
APLICARE
APPLICATION
CONDITIONS
Vopselele seria V 5700 se vor aplica pe suprafete curate si uscate, ce vor avea
temperaturi peste temperatura punctului de roua pentru evitarea condensarii umiditatii pe
suport. Umiditatea relativa va fi de max. 70%. Aplicarea decurge in conditii optime, daca
se asigura o temperatura a mediului ambiant si a amestecului de 10-30C.
V 5700 series paints should be applied only on dry and clean surfaces with temperatures above the
dew point temperature in order to avoid condensation. The relative humidity should be of max. 70%.
Application is made under optimal conditions if is ensured a temperature of the ambient
environment and mixture of 10 -30C.
Observatie
Remark
"#$ % &
"
$"
#" "
ACRILIN V 5700
INSTRUCTIUNI DE
APLICARE
APPLICATION
INSTRUCTIONS
,& &
pag.4/6
Se conditioneaza produsul la temperatura de10-30C. Inainte de aplicare se dilueaza
produsul in proportiile recomandate sau in proportiile necesare pentru a obtine grosimile
de pelicula cerute.
Astfel pregatite, vopselele seria V 5700 se pot aplica:
-pe suprafete metalice neferoase (zinc, aluminiu, s.a.), pregatite mecanic corespunzator
sablare, periere, slefuire, s.a.) si tratate cu grunduri reactive (de ex.: seria G 4100P);
-ca strat final in sistemele de protectie ale suprafetelor din otel, aplicate peste grunduri
alchido-acrilice seria G 5700, grunduri alchidice seria GS 5400V, grunduri epoxidice
:seria G 3201 sau seria G 3200S sauG 3202-1, grunduri cu etilsilicat G 4101 aplicate pe
suprafete sablate la gradul minim Sa 2 1/2
-ca strat intermediar in sistemele de protectie alchido-acrilice, acrilice ale suprafetelor din
otel, aplicate peste grunduri alchido-acrilice seria G 5700, grunduri alchidice seria
GS 5400V, grunduri epoxidice: seria G 3201 sau seria G 3200S sau G 3202-1, grunduri
cu etilsilicat G 4101 aplicate pe suprafete sablate la gradul minim Sa 2 1/2
-pe suprafete din lemn pregatite corespunzator prin degresare, slefuire, desprafuire si
impregnare cu lazura IG 5100F sau aplicarea grundului G 53101.
-pe suprafete din beton si elemente de zidarie noi, verificate ca rezistenta mecanica,
uscate, desprafuite si fara urme de lapte de ciment.
Straturile succesive de vopsea seria V 5700 se pot aplica: in sistem ud/ud la
15-20 minute, la 20C sau dupa 60 minute de la uscarea fortata la temperatura de 60C a
acestuia.
The product should be conditioned at 10-30C. Before application the product should be thinned in
recommended proportions or in necessary proportions for obtaining the required thickness of the
film.
Thus prepared the V 5700 series paints can be applied:
-over non-ferrous metallic surfaces (zinc, aluminium, etc.)properly prepared mechanically (blasting,
brushing, polishing, etc) and treated with reactive primers (e.g. : G 410OP series);
-as top coat in protective systems of steel surfaces, applied over alkyd-acrylic primers G 5700
series, alkyd primers GS 5400V series, epoxy primers: G 3201 series or G 3200S series or
G 3200HS or G 3202-1, ethylsilicate primer G 4101, applied on surfaces blasted at minimum Sa 2
-as an intermediate coat in the acrylic, alkyd-acrylic protection systems of steel surfaces, applied on
alkyd-acrylic primers of G 5700 series, epoxy primers : G 3201 series, G 3200S series or
G 3200HS series or G 3202-1,ethylsilicate primer G 4101applied on surfaces blasted at min. Sa2
-over wood surfaces properly prepared by degreasing, polishing, dedusted and impregnating with a
IG 5100F glaze or application of G 53101 primer.
-over concrete surfaces and new masonry elements, verified as mechanic strength, dried, dedusted
and without traces of cement milk.
The successive coats of paint V 5700 series can be applied : in wet-on-wet system at
15 -20 minutes, at 20C or after 60 minutes after its forced drying at 60C.
REACOPERIRE
RE-COATING
"#$ % &
"
$"
#" "
ACRILIN V 5700
,& &
% & ()
GS 5400V
Min.
Max.
*G 5700
Min.
Max.
G 3200S
Min.
Max.
G 3201
Min.
Max.
G 3202-1
Min.
Max.
G 4100P
Min.
Max.
24 h
7 zile
4 zile
14 zile
8h
48 h
24 h
48 h
8h
48h
3h
3 zile
24 h
7 days
4 zile
14 days
8h
48 h
24h
48 h
8h
48h
3h
3 days
* Se recomanda sa se aplice in sistem ud/ud la 15-20 minute, la 20C, in caz contrar se respecta intervalele de reacoperire din tabel.
* It should be applied in wet-on-wet system at 15-20 minutes at 20C, on the contrary observe re-coating interval from the table.
Observatii
Remarks
AMBALARE
PACKING
SECURITATEA MUNCII
WORK SAFETY
"#$ % &
"
$"
#" "
ACRILIN V 5700
NOTA
NOTE
,& &
% & )()
All these data have a general character regarding the performance and use of the product; therefore
we recommend the testing of the product under conditions specific to the application technology of
the beneficiary.
Please contact the producer for further information.
"#$ % &
"
$"
#" "
ACRILIN V 5700
"#$ % &
,& &