Documente Academic
Documente Profesional
Documente Cultură
FT V 3200HS PDF
FT V 3200HS PDF
EDITIA 1
REVIZIA 2
DATA 10.02.2004
pag. 1/5
Descriere Produsele EPOMID V 3200HS sunt vopsele bicomponente pe baza de rasini epoxidice si
Description fosfat de zinc, cu intarire amidica. Foarte buna rezistenta la actiunea factorilor de mediu,
buna rezistenta la petrol, ulei mineral, solutii saline, buna rezistenta la agenti chimici, buna
rezistenta la apa si variatii de temperatura, caracteristici mecanice ridicate (duritate, soc
mecanic, flexibilitate), aderenta foarte buna la diverse tipuri de suport, reacoperire usoara.
EPOMID V 3200HS products are two- component paints based on epoxy resins and zinc phosphate,
with amide curing. Very good weather resistance, good resistance to petroleum, mineral oil, salt
solutions, good resistance to chemicals, good resistance to water and temperature variations, high
mechanical characteristics (hardness, mechanical shock, flexibility), very good adherence to
different substrates, easy to re-coat.
Utilizare Vopselele V 3200HS sunt utilizate ca strat intermediar pentru lucrari noi sau de reparatii si
Recommended use intretinere, acolo unde se solicita sisteme epoxidice de protectie:
-protectia anticoroziva a suprafetelor din otel, a reperelor de metal expuse la diverse
conditii favorabile coroziunii;
-in domeniul constructiilor / reparatiilor de nave si platformelor marine, protectia tancurilor
de produse lichide, punti interioare si exterioare, instalatii din compartimentul masinilor,
magazii frigorifice, motoare principale, pompe, filtre etc.;
-protectia interioara si exterioara a rezervoarelor de apa potabila, ape reziduale si
produse petroliere (uleiuri minerale, benzina, motorina, hidrocarburi etc.);
-protectia utilajelor din industria chimica, alimentara, farmaceutica, constructii de masini,
vagoane si diverse utilaje, constructii metalice diverse (poduri, macarale, s.a.);
-protectia elementelor de rezistenta ale constructiilor din otel;
-ca sealer, pentru suprafetele protejate cu produse bogate in zinc.
Sunt recomandate pentru climatele: TH, TA, MT, F, N, M.
V 3200HS paints are used as intermediate coat for new surfaces or repairs and maintenance works,
when the epoxy system is required:
-anticorrosive protection of steel surfaces, metal parts exposed to corrosion conditions;
-within the field of ships and marine platforms construction and repairing, for protection of liquids
storage tanks, inside and outside decks, equipment from engines room, cold rooms, main engines,
pumps, filters, etc.;
-inside and outside protection of tanks for drinking water tanks, waste water and petroleum products
(mineral oils, petrol, gas oil, hydrocarbons, etc.);
-protection of equipment from chemical, food and pharmaceutical industries, mechanical
engineering, waggons and different outfits, different metallic constructions: bridges, cranes, etc.;
-protection of strength parts of steel structures;
-as sealer, for surfaces protected with zinc rich products.
They are recommended for TH, TA, MT, N, F, M climates.
Certificate Produsele seria V 3200HS sunt omologate tehnic de Autoritatea Feroviara Romana AFER
Certificates cu Certificat de Omologare Tehnica Feroviara seria OT Nr.: 511/ 2003.
V 3200HS series products are technically homologated by ROMANIAN RAILWAY AUTHORITY with
Certificate of Railway Technical Homologation series OT No: 511/2003
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
TECHNICAL DATA SHEET
EDITIA 1
REVIZIA 2
DATA 10.02.2004
pag. 2/5
CARACTERISTICI TEHNICE
TECHNICAL DATA
Aspect Semilucios vizual
Finish Semi glossy visual
Volum de solide V 329005HSFZ -
Volume solids 43% approx.
V 323009HSFZ
48% approx.
Densitate 1.25 kg/l approx. SR ISO 2811: 1995
Specific gravity (at 20 C)
Timp de scurgere 35 - 55s STAS 2096 - 68
Flow time (at 20 C, STAS cup, : 4mm)
Duritate Persoz, min. 140 s SR ISO 1522 : 1995
Persoz hardness, minimum
Aderenta, grila de 1 mm 1 SR ISO 2409 : 1994
Adherence to substrate, 1 mm grid
Uscare, approx. (at 20 C, 655% rel. hum.) ASTMD 1640 -95 (STAS 2875- 75)
Dry- to- touch (Tip B) 8 hours
Dry- to- handle (Tip D) 14 hours
Fully cured 7 days
Valabilitate in ambalaj 6 luni de la data fabricatiei, in conditiile respectarii prevederilor de ambalare si
Shelf life depozitare. In functie de conditiile de depozitare, inaintea utilizarii se recomanda
amestecarea produsului.
6 months from the production date, with the observance of the storage and packing
provisions.
Depending on the storage conditions, it is recommended to stir the product before use.
DETALII DE APLICARE
APPLICATION DETAILS
Raport de amestecare Vopsea V 3200HS : Intaritor I 322 100p : 30p masic (100p : 40p volumic)
Mixing ratio Base V 3200HS : Curing agent I 322 100p : 30p by weight (100p : 40p by volume)
Timp de prereactie 30 min. -
Pre-reaction time (at 20 C)
Interval de utilizare 16 hours SR EN ISO 9514 : 1997
Pot life (at 20 C)
Metoda de aplicare pensulare / roluire Pulverizare aer pulverizare airless
Application method brushing (touch up) / rolling air spraying airless spraying
Diluant utilizat / Dilutie D 302 (do not dilute) D 302 (3 - 10%) D 302 (3 - 5%)
Thinner / Thinning
Presiune - 3 - 4 atm 140 - 160 atm
Pressure
Diametru duza - 1.8 - 2.2 mm 0.28 - 0.53
Nozzle orifice
Curatare instrumente KBER CLEANER DKC 003-02S
Cleaning of tools
Grosime strat umed V 329005HSFZ SR ISO 2808: 1993
Typical wet film thickness 300 m approx.
V 323009HSFZ
270 m approx.
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
TECHNICAL DATA SHEET
EDITIA 1
REVIZIA 2
DATA 10.02.2004
pag. 3/5
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
TECHNICAL DATA SHEET
EDITIA 1
REVIZIA 2
DATA 10.02.2004
pag. 4/5
CONDITII DE Vopselele seria V 3200HS se vor aplica pe suprafete curate si uscate, ce vor avea
APLICARE temperaturi peste temperatura punctului de roua, pentru evitarea condensarii umiditatii pe
APPLICATION suport. Umiditatea relativa va fi de max.70%. Aplicarea decurge in conditii optime daca se
CONDITIONS asigura o temperatura a mediului ambiant si a amestecului de 10-30C.
V 3200HS series paints should be applied only on dry and clean surfaces with temperatures above
the dew point temperature in order to avoid condensation. The relative humidity should be of max.
70%. Application is made under optimal conditions if is ensured a temperature of the ambient
environment and mixture of 10-30C.
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro
TECHNICAL DATA SHEET
EDITIA 1
REVIZIA 2
DATA 10.02.2004
pag. 5/5
Observatii Inainte de reacoperire, dupa expunerea in medii contaminate, suprafetele vor fi bine
Remarks curatate prin spalare cu jet de apa la presiune ridicata, urmata de uscare. In cazul
depasirii intervalului maxim de reacoperire, se va proceda la o asperizare a suprafetei
pentru a se asigura o buna aderenta pentru straturile urmatoare.
Atingerea intervalelor maxime de reacoperire, asigurarea unei bune aderente, precum si
bune proprietati mecanice implica asigurarea urmatoarelor:
-vopseaua trebuie aplicata intr-o grosime de strat uscat in jurul valorii de 130 m
-stratul de vopsea obtinut trebuie sa fie uniform, de buna calitate si fara urme de
pulverizare uscata
-conditiile de uscare si intarire vor fi conform celor specificate la punctul CONDITII DE
APLICARE pana la intarirea completa
-suprafetele TREBUIE sa fie perfect curate inaintea reacoperirii.
Suprafetele vopsite pot fi expuse doar pentru scurte perioade de timp direct la lumina
solara (UV), altfel intervalele de reacoperire maxime nu mai sunt valabile.
Before re-coating, after exposure in contaminated environment, clean the surface thoroughly by
(high pressure) fresh water jetting and let it dry. If the maximum re-coating interval is exceeded,
roughening of the surface is necessary to ensure intercoat adhesion.
For reaching the maximum re-coating intervals, ensuring a good adherence as well as good
mechanical properties the following conditions should be ensured:
-the primer has a dry film thickness as near as possible to 130 m
-the film formed is uniform, qualitative and "dry spray- free"
-the drying and curing conditions are according to the APPLICATION CONDITIONS until full cure is
obtained
-the surfaces MUST be completely clean before re-coating
The coated surfaces can be exposed only for short periods, directly to sunlight (ultra-violet light),
otherwise the maximum re-coating intervals are not valid.
SECURITATEA MUNCII Toate operatiile de manipulare, transport, depozitare, utilizare se vor realiza respectand cu
WORK SAFETY strictete normele de prevenire a incendiilor, normele de protectia muncii si igiena sanitara.
Se interzice: prezenta oricaror surse de foc, vopsirea in spatii fara o ventilatie
corespunzatoare, contactul direct al pielii cu produsul respectiv, inhalarea prelungita a
vaporilor, ingerarea produsului.
All the operations of handling, transport, storage and use should be accomplished in strict
compliance with the fire prevention, safety and health norms. The presence of any fire source,
painting in areas without adequate ventilation, direct contact of skin with the respective product,
prolonged inhalation of vapours and ingestion of the product should be forbidden.
NOTA Toate aceste date au caracter general privind performantele si utilizarea produsului, de
NOTE aceea recomandam testarea produsului in conditiile propriei tehnologii de aplicare a
beneficiarului.
Rugam consultati producatorul pentru lamuriri suplimentare.
All these data have a general character regarding the performance and use of the product, therefore
we recommend the testing of the product under conditions specific to the application technology of
the beneficiary.
Please contact the producer for further information.
KBER Ltd. Turturesti-Girov, NEAMT District, ROMANIA, Phone +40-(02)33-291800, Fax +40-(02)33-234450, E-mail vim@kober.ro, Internet http://www.kober.ro