Documente Academic
Documente Profesional
Documente Cultură
Grupa: 32401
PROIECT CBA II n=9
l1 a + 0.05 m n = 5.7 m l1 + l2 + l1 + l2 + l1 t2 + t1 + t2
l2 b + 0.1 m n = 5.05 m
t1 c - 0.05 m n = 5.2 m
t2 d - 0.1 m n = 5.75 m
nl 4 (nr de nivele)
l1 + l2 + l1 + l2 + l1 t2 + t1 + t2 nniv 4
ag 0.4 g Tc 1 s
Created with PTC Mathcad Express. See www.mathcad.com for more information.
Vedere in plan:
Sectiune in plan:
2.Evaluarea Incarcarilor
Created with PTC Mathcad Express. See www.mathcad.com for more information.
2.Evaluarea Incarcarilor
2.1.Evaluarea incarcarilor gravitationale
2.1.1.Incarcarilor permanente
Created with PTC Mathcad Express. See www.mathcad.com for more information.
kN kN kN
gkper.E.T 3.23 2
2.80 m = 9.044 bet 25
m m m3
kN kN kN
gkper.E.L 3.23 2.95 m = 9.529 gplanseu 7.88
m2 m m2
kN kN kN
gkper.P.T 3.23 3.5 m = 11.305 gterasa 6.60
m2 m m2
kN kN kN
gkper.P.L 3.23 3.65 m = 11.79 gp.despartitori 0.375
m2 m m2
kN kN
gkAtic.P.T 4.65 0.6 m = 2.79
m2 m
2.1.2.Incarcarilor utile (CR 0-2012)
Cladire pentru birouri se incadreaza in categoria B,cu incarcari utile gu 2.5
kN
m2
2.1.2.Incarcarea din zapada pe acoperis
Created with PTC Mathcad Express. See www.mathcad.com for more information.
Predimensionarea elementelor structurale:
Predimensionarea grinda secundara:
aleg
l1
hgs = 57 cm hgs 60 cm
10
-este recomandat valorile raportul hgs / bgs =1.5...3
hgs
bgs = 30 cm
2
-conditiie de rezistenta la foc: bgs 200 mm (R120)
aleg
t2
hgp = 71.875 cm hgp 75 cm
8
-este recomandat valorile raportul hgp / bgp =1.5...3
hgp
bgp = 37.5 cm
2
-conditiie de rezistenta la foc: bgp 200 mm (R120)
Created with PTC Mathcad Express. See www.mathcad.com for more information.
Predimensionarea placa:
-Conditii tehnologice:-grosimea placi din beton armat turnat monolit se ve stabili
astgel incat sa fie multiplu de 10 mm
-Conditii de rigiditate:-ochiurile de placa au descarcare bidirectionala
avand raportul laturilor lmax / lmin <2
lmin -min( ln1 , ln2 )-din ochiul de placa cel mai mare
bgs
ln1 l1 - 2 = 5.4 m
2
bgp
ln2 t2 - 2 = 5.35 m
2
lmin min ln1 , ln2 = 5.35 m
lmin
hp = 11.889 cm
45
-Conditie de grosime minima:-grosimea minima a unei placi din beton armat
turnat monolit este de hp 50 mm
hp 60 mm -conf.Tabelul 3.28
Aleg hp 13 cm
Predimensionarea stalp:
Created with PTC Mathcad Express. See www.mathcad.com for more information.
hc 50 cm bc 50 cm
kN
gkper.E.T = 9.044 m
m2
kN
gkper.E.L = 9.529 m
m2
kN
gkper.P.T = 11.305 m
m2
kN
gkper.P.L = 11.79 m
m2
C25/30 -rezulta
N fck N
fck 25 fcd = 16.667
mm 2 1.5 mm 2
h c = bc
Nsc
= [[ 53.096 ]] cm
d fcd
Aleg stalp : hc 55 cm bc 55 cm
Created with PTC Mathcad Express. See www.mathcad.com for more information.
hc 55 cm bc 55 cm
T1 0.446 s 0 2.5
u
q5 q 5.75
1
((T)) m
SdT1 ag = 1.706
q s2
0.85
-ultimul etaj
G4.1 gterasa 470.19 m 2 + 0.3 sk 470.19 m 2 + gAtic 88.9 m + ggr.T 98.8 m + ggr.L 96.9 m
1 1 1
G4.2 gkper.E.T 32.30 m + gkper.E.L 49.4 m + 24 hc bc bet h1util + hgp
2 2 2
G4 G4.1 + G4.2 = 5.316 10 3 kN
-etaj 2-3
G23.2 ggr.T 98.8 m + ggr.L 96.9 m + gkper.E.T 32.30 m + gkper.E.L 49.4 m + 24 hc bc bet h1util + hgp
Created with PTC Mathcad Express. See www.mathcad.com for more information.
Gtot G1 + 2 G23 + G4 = 2.528 10 4 kN
Gtot
masa = 2.578 10 3 tonne
g
Fb I.e SdT1 masa = 3.737 10 3 kN
1.Evaluarea incarcarilor din vant
-cf CR 1-1-4/2012
z0 1 m (tabelul 2.1)
Inaltimea constructiei:
z 15.5 m
Factorul de proportionalitate:
2.12 2
= 2.12 (tabelul 2.3)
Intensitatea turbulentei:
(relatia 2.11)
Ivz = 0.309
z
2.5 ln
z0
Factorul de varf:
g 3.5
Factorul de rafala:
Factorul de rugozitate:
kr 0.233
2
2 z
crz kr ln = 0.408
z0
Created with PTC Mathcad Express. See www.mathcad.com for more information.
2
2 z
crz kr ln = 0.408
z0
e = 27.1 m
e
= 5.42 m
5
4
4 = 3.2
5
h
= 2.331
d
Created with PTC Mathcad Express. See www.mathcad.com for more information.
h
= 2.331
d
b 17.35 m d 27.10 m
h 15.5 m
Created with PTC Mathcad Express. See www.mathcad.com for more information.
2
2 z
crz kr ln = 0.408
z0
Valoarea de varf a presiunii dinamice a vantului:
h
= 0.572
d
kN
qpz cpv ((z)) crz qb = 0.51
m2
Created with PTC Mathcad Express. See www.mathcad.com for more information.
ZONA A: we Iw cpe.10A qpz = -0.703 kPa
b 27.10 m
h 15.5 m
hp 0.6 m
Created with PTC Mathcad Express. See www.mathcad.com for more information.
hp 0.6 m
hp
= 0.039
h
ZONA F: cpe.10F -1.59
b 17.35 m h 15.5 m
d 27.10 m
Created with PTC Mathcad Express. See www.mathcad.com for more information.
ZONA F: cpe.1F -1.59
Created with PTC Mathcad Express. See www.mathcad.com for more information.