Documente Academic
Documente Profesional
Documente Cultură
90.Breinan, E.M. Kear, B.H., Banas, C.M. şi Geenwald, C.M. (1976) Proc. Int. Symp.
Superalloys, 3rd vol., Claitor’s Publ., Louisiana.
91.Breinan, E.M. Kear, B.H., (1978), “Rapid Solidification Principles and Technologies”,
Claitor’s Publ., Louisiana 87-103.
92.Furrer, P. şi Warliment, H. (1971), Z.Metallk. 62, 12-20.
93.Pond, R.B. (1971), Proc. Battelle Dev. Corp. Conf.
94.Jones, H. (1976), “Proc. Rapidly Quenched Metals, 25-27, MIT Press, Cambridge,
Massachusetts.
95.Jones, H. (1978), Aluminium 54, 274-281.
96.Wentzell, J.M. (1974), J.Vac. Sci.Tehnol. 11, 1035-1037.
97.Lierke, E.G. şi Griesshammer, G. (1967), Ultrasonics 5, 224-228.
98.Ballard, W.E. (1962), Metall.Rev. 7, 283-326.
99.Hecht, N.L. (1972), “Techniques of Metals Research”, VII, 1, Interscience, New York,
229-278.
100.Gummeson, P.U. (1972), Powder Metall. 15, 67-94.
101.Gummeson, P.U. (1972), “Powder Metallurgy for High Performance Applications”,
Syracuse Univ. Press, New York.
102.Dunklay, J.J. (1978), Wire Ind. 45, 365-371.
103.Domşa, A. şi Berkovits, S. (1971), “Modern Developments in Powder Metallurgy” 4,
Plenum Press, New York, 63-74.
104.Widmer, R. (1972), “Powder Metallurgy for High Performance Applications”,
Syracuse Univ. Press, New York., 69-84.
105.Grant, N.J. (1978), “Powder Metallurgy for High Performance Applications” ,
Syracuse Univ. Press, New York, 230-245.
106.Small, S. şi Bruce, T.J. (1968), Int.J.Powder Met. 4, 7-17.
107.Joly, P.A. şi Mehrabian, R. (1974), J.Mater. Sci. 9, 1446-1455.
108.Duvez,P.,Willens, H.R. si Klement,W.(1960), J.Appl.Phys. 31, 1136-1137.
109.Boswell,P.G. şi Chadwick, G.A. (1976),J.Appl.Phys.,9,523-526
110.Kauffmann,A.R. şi Miller,W.C.,(1964), Nuclear Metals Rep.NMI 1262.
111.Kauffmann,A.R. şi Miller,W.C.,(1964), Nuclear Metals Rep.NMI 1263.
112.Ruhle,M.,(1975), Metall.29, 237-247.
113.Krishnanand,K.D. şi Cahn,R.W. (1976), “Rapidly Quenched Metals”, 67-75, MIT
Press, Cambridge, Massachusets
114.Read,P.J., Latimer K.J., Reynolds,T.D.W. si Manson, D.(1976), British Patent
1431895
115.Kauffmann,A.R. şi Miller,W.C.,(1964), Nuclear Metals Rep.NMI 1621
116.Hodkin,D.J., Sutcliffe,P.W., Mardon,P.G.,Russell,L.E.(1973), Powder
Metall.,16,277-313
117.Dobatkin,V.I., Elagin,V.I.(1966). Sov.J.Nonferrous Met. 7(8), 89-93
118.Cox,A.R., Moore,J.B., van Reuth,E.C.(1976) Proc. Int. Symp. Superalloys, 3rd vol. ,
Claitor’s Publ., Louisiana.
119.Kauffmann,A.R.,(1973), U.S.Patent 3099041
120.Jones, H., Burden,M.(1971)., J.Phys.4,671-674
121.Ahlborn H., Merz, M.D. (1971), Aluminium 47, 671-677
122.Singer,A.R.E., Kisakurek,S.E.(1976), Met.Technol. 3,565-570
123.Groeber,H. Haneman,H. (1937), Arch.Eisenhuttenwesen 11,199-202