Documente Academic
Documente Profesional
Documente Cultură
Step 2:
e. Why are ND PDUs present?
Pentru a trimite pachete ping ICMPv6 către PCA2, PCA1 trebuie să cunoască adresa
MAC a destinației. IPv6 ND solicită aceste informații în rețea.
f. Because the message starts with this event there is only an Outbound PDU. Under
the OSI Model tab, what is the Message Type listed for ICMPv6?
ICMPv6 Echo Message Type: 128
h. Is there any difference between the In Layers and Out Layers for Layer 2?
Nu. Switchul nu modifică informațiile de la Layer 2, ci doar redirecționează
frameul.
Note: The addresses in the fields may be wrapped, adjust the size of the PDU window
to make address information easier to read.
j. Select the first NDP event at RTA. Why are there no Out Layers?
IPv6 address nu se potriveste cu adresa routerului deci scapă pachetul.
l. Does PCA1 now have all of the necessary information to communicate with PCA2?
Da, acum stie adresa destination IPv6 address si estination MAC address a PCA2.
Part 2:
Step 1:
g. What address is being used for the Src IP in the inbound PDU?
Link Local address pentru PCA1 – fe80::201:42ff:fe7e:e8ed
p. Why is PCB1 using the router interface MAC address to make its ICMP PDUs?
Deoarece dispozitivul de destinație se află într-o altă rețea, PCB1 adresează
PDU-ului la interfața implicită de gateway MAC. RTA va determina cum să se adreseze
PDU-ului la Layer 2 pentru a-l trimite către destinație.
Step 2:
b. How many addresses are listed?
4 – IPv6 global unicast și link adrese locale și MAC addresses pentru PCA1 si PCB1
Are there any entries for PCA2 listed (why or why not)?
PCA2 nu a comunicat încă prin rețea
Reflection Questions
How does a router help to minimize the amount of IPv6 Neighbor Discovery traffic on
a network?
The router keeps neighbor tables so that it doesn’t need to initiate ND for every
destination host.
How does IPv6 minimize the impact of the ND process on network hosts?
Acesta foloseste multicast address astfel încât doar o mână de adrese ar fi
ascultate de Neighbor Discovery messages. IPv6 creează o adresă MAC de destinație
multicast special creată, care include o parte din adresa nodului.
How does the Neighbor Discovery process differ when a destination host is on the
same LAN and when it is on a remote LAN?
When a destination host is on the same LAN segment only the device that matches the
IPv6 address responds and other devices drop the packet. When the device is remote
the gateway device (usually a router) provides the MAC address of the interface on
the local interface for the destination MAC and then searches for the MAC address
on the remote network. The router will then place the responding IPv6/MAC address
pair in the IPv6 Neighbor table. (similar to an ARP table in IPv4)Când o gazdă de
destinație se află pe același segment LAN, numai dispozitivul care se potrivește cu
adresa IPv6 răspunde și alte dispozitive renunță la pachet. Când dispozitivul este
la distanță, dispozitivul gateway (de obicei un router) furnizează adresa MAC a
interfeței pe interfața locală pentru MAC-ul de destinație și apoi caută adresa MAC
în rețeaua la distanță. Routerul va plasa apoi perechea de adrese IPv6/MAC care
răspunde în tabelul IPv6 Neighbor.