Documente Academic
Documente Profesional
Documente Cultură
PhD Thesis
A. Books
1
14. SEGHEDIN N., Etica şi dreptul proprietăţii intelectuale, Programul Operaţional
Sectorial Dezvoltarea Resurselor Umane 2007 – 2013, STUDII DOCTORALE PENTRU
PERFORMANŢE EUROPENE ÎN CERCETARE ŞI INOVARE (CUANTUMDOC)
POSDRU/107/1.5/S/79407 (http://www.cuantumdoc.tuiasi.ro/).
15. SEGHEDIN N., Creativitate tehnica, etica, proprietate intelectuala. Programul
Operaţional Sectorial Dezvoltarea Resurselor Umane 2007 – 2013, 4D-POSTDOC - Dezvoltarea
şi susţinerea de programe postdoctorale multidisciplinare în domenii tehnice prioritare ale
strategiei naţionale de cercetare - dezvoltare - inovare
(http://ctmtc.utcluj.ro:8080/sites/fordoc/Documente%20proiect/Forms/AllItems.aspx?RootFolder
=%2Fsites%2Ffordoc%2FDocumente%20proiect%2F2011%2F01%20Seminar%20Iasi%2F04%
5FMateriale%20seminar%20pregatire%2F03%5FSeghedin).
16. SEGHEDIN N. (editor), Experienţa a 7 universităţi din România în diseminarea
cunoştinţelor de proprietate intelectuală. Ed. Performantica, Iaşi, 2012, ISBN 978-973-730-952-
5, 187 pag.
17. Intellectual property course design manual. European Patent Office, Munich, 2011,
390 pag. (published in 2012) (www.epo.org/design-manual) (50 pag. pers. contrib.).
B. Indexed papers
2
7. SEGHEDIN N., The Influence Of The Hydraulic Driving System On The Dynamic
Behavior Of The Workpiece Clamping Devices On Machine-Tools. Annals of DAAAM for 2006
and Proceeding of the 17th International DAAAM Symposium "Intelligent Manufacturing &
Automation: Focus on Mechatronics and Robotics" Editor: B. Katalinic, ISSN 1726-9679, ISBN
3-901509-57-7, 8-11th November 2006, Vienna, Austria, Published by DAAAM International,
Vienna, 2006, pag. 373-374 (indexed ISI Proceedings, INSPEC, Cambridge Scientific Abstracts,
CrossReferences, Recent Advances in Manufacturing).
8. SEGHEDIN N., ZLATI C. and ZLATI N., Program for Structural Synthesis of the
Multiple Fixtures. World Congress on Engineering 2007. The 2007 International Conference of
Manufacturing Engineering and Engineering Management, London, U.K., ISBN: 978-988-
98671-5-7, 2-4 July, 2007, pag. 1171-1176 (indexed IET INSPEC, EBSCO, ISI Thomson
Scientific, Engineering Index (EI), The Technology Research Databases (TRD) of CSA
(Cambridge Scientific Abstracts), DBLP and Computer Science Bibliographies).
9. SEGHEDIN N., Combinatorics in Technical Creation. Annals of DAAAM for 2007
and Proceeding of the 18th International DAAAM Symposium "Intelligent Manufacturing &
Automation: Focus on Creativity, Responsibility and Ethics of Engineers". Editor: B. Katalinic,
ISSN 1726-9679, ISBN 3-901509-58-5, 24-27th October 2007, Zadar, Croatia, Published by
DAAAM International, Vienna, 2006, pag. 681-682 (indexed ISI Proceedings, INSPEC,
Cambridge Scientific Abstracts, CrossReferences).
10. SEGHEDIN N., CIONCA D., DROSESCU, R., Installation and Methodology for the
Study of the Stability of Implants Used in Treating Femoral Neck Fractures, The 19th
International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Next
Generation of Intelligent Systems and Solutions" ISSN 1726-9679, ISBN 978-3-901509-68-1,
Trnava, Slovakia, 22-25th October, 2008, pag. 1239-1240 (indexed ISI).
11. SEGHEDIN N., TODEREAN D., MARIAN S., Internal Quality Assessment for
Bachelor’s and Master’s Degree Programs in Technical Higher Education. MTC 2009, The 6th
International Conference on Management of Technological Changes, ISBN 978-960-89832-8-1,
September 3rd – 5th, 2009, Alexandroupolis, Greece, vol.2, pag. 355-358 (indexed ISI).
12. HORODINCA M., SEGHEDIN N., CARATA E., Improving the Quality of
Mechanical Structures Dynamics Using High Efficiency Passive Modal Energy Absorbers. MTC
2009, The 6th International Conference on Management of Technological Changes, ISBN 978-
960-89832-7-4, September 3rd – 5th, 2009, Alexandroupolis, Greece, vol. 1, pag. 501-504
(indexed ISI).
13. HORODINCĂ M., SEGHEDIN N. E., CARATA E., CHITARIU D., IVAŞCU C.,
Dynamic Behaviour Correction on Mechanical Structures using Active Feedback. I. Dynamics
Correction in Theoretical Terms. Buletinul Institutului Politehnic din Iaşi (publicat de
Universitatea Tehnică „Gh. Asachi” din Iaşi), Tomul LV (LIX), Fasc. 4, 2009, Secţia Construcţii
de Maşini, pag. 15-22 (indexed Index Copernicus).
14. HORODINCĂ M., SEGHEDIN N. E., CARATA E., CHITARIU D., IVAŞCU C.,
Dynamic Behaviour Correction on Mechanical Structures using Active Feedback. II. Dynamics
Correction in Experimental Terms, Buletinul Institutului Politehnic din Iaşi (publicat de
Universitatea Tehnică „Gh. Asachi” din Iaşi), Tomul LV (LIX), Fasc. 4, 2009, Secţia Construcţii
de Maşini, pag. 23-30 (indexed Index Copernicus).
15. SEGHEDIN N. şi MIRCEA T., Study of the Irregularity Degree of Clamping Pieces
in Lever Multiple Fixtures. Bul. Inst. Polit. Iaşi (publicat de Universitatea Tehnică “Gh. Asachi”
Iaşi), tomul LVI (LX), fasc. 1, secţia Construcţii de Maşini, 2010, pag. 33-40 (indexed Index
Copernicus).
16. SEGHEDIN N., VOICU M., TODEREAN D., MARIAN S., Using The Weighted
Cause – Effect Diagram In The Process Of Quality Assurance In Higher Education. Proceedings
of the 6th International Seminar Quality Management In Higher Education. Ed. Costache Rusu,
July, 8th -9th, 2010, Tulcea, Romania, Book II, pag. 251-254 (indexed ISI).
3
17. HORODINCA, M.; SEGHEDIN, N. - E.; CARATA, E.; GHERGHEL, N.;
CHITARIU, D. & FILIPOAIA, C. (2010). A Study on a Wideband Frequency Passive Dynamic
Vibration Absorber Based on Visco-Elastic Mechanical Suspension, Annals of DAAAM for
2010 & Proceedings of the 21st International DAAAM Symposium, ISBN 978-3-901509-73-5,
ISSN 1726-9679, pag 1199-1201, Editor B. Katalinic, Published by DAAAM International,
Vienna, Austria 2010 (indexed Google Scholar and Ebsco).
18. HORODINCA, M.; SEGHEDIN, N. E.; CARATA, E.; GHERGHEL, N.;
CHITARIU, D. & FILIPOAIA, C. (2010). Experimental Study on a Lorentz Force Actuator
Used as Tuneable Passive Viscous Damper , Annals of DAAAM for 2010 & Proceedings of the
21st International DAAAM Symposium, ISBN 978-3-901509-73-5, ISSN 1726-9679, pag. 1201-
1203, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2010 (indexed
Google Scholar and Ebsco).
19. SEGHEDIN N., VOICU M., TODEREAN D., MARIAN S., Ways To Development
Of The Quality Culture In Universities. Proceedings of the 6th International Seminar Quality
Management In Higher Education. Ed. Costache Rusu, July, 8th -9th, 2010, Tulcea, Romania,
Book II, pag. 255-258 (indexed ISI).
20. SEGHEDIN N., Conception Of A Virtual Application For Stimulating Technical
Creativity By Use Of The Heuristic Actions Method, The 6th International Scientific Conference
“eLearning and Software for Education” eLSE, Bucharest, April 15-16, 2010, pag. 411-418
(Indexată ISI).
21. SEGHEDIN N., Development Methodology Of Idea Diagrams. Bul. Inst. Polit. Iaşi
(publicat de Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LVI (LX), fasc. 2a, secţia
Construcţii de Maşini, 2010, pag. 281-288 (indexed Index Copernicus).
22. SEGHEDIN N., Hierarchical Description of Technological Devices. Proceedings of
the World Congress on Engineering 2011 Vol I., July 6 - 8, 2011, London, U.K., ISBN 978-988-
18210-6-5, ISSN 2078-0958, pag. 877-884 (indexed EBSCO).
23. HORODINCA M., SEGHEDIN N., CARATA E., A study on a bistabil linear
actuator actuated with magnetic field intermediated attraction forces. Bul. Inst. Polit. Iaşi
(publicat de Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LVII (LXi), fasc. 4, secţia
Construcţii de Maşini, 2011, pag. 133-144 (indexed Index Copernicus).
24. SEGHEDIN N., CHITARIU D. E-learning System for Fixtures Design. The 7th
International Scientific Conference “eLearning and Software for Education” eLSE, Bucharest,
April 28-29, 2011, pag. 141-148 (indexed ISI).
25. SEGHEDIN N., CHITARIU D. E-learning system for using the morphological matrix
method in the technical creation. LEVERAGING TECHNOLOGY FOR LEARNING,
Proceedings of the 8th International Scientific Conference "eLearning and Software for
Education" Bucharest, April 26 - 27, 2012, pag. 530-535, Volume 1. Publisher: Editura
Universitara (ISSN: 2066 - 026X print 2066 - 8821 online) (indexed ISI)..
26. SEGHEDIN N., CHITARIU DRAGOS, Software Application For The Development
Of Quality Culture In Higher Education. Proceedings of the 9th International Scientific
Conference "eLearning and Software for Education" Bucharest, April 25 - 26, 2013, pag. 338-
343 (indexed ISI).
27. BLAGA M., SEGHEDIN N. E., CIOBANU A. R., Warp knitted fabrics behaviour
under dynamic testing. Industria Textilă, Volume: 64, Issue: 6, 2013, pag. 334-341 (Impact
factor 0,3).
28. HORODINCĂ M., SEGHEDIN N. E., CARATA E., FILIPOAIA C., BOCA M.,
CHITARIU D., Experimental Investigations of the Power Absorbed at Mechanical Resonance.
Experimental Techniques, Volume 37, Issue 5, pages 21–31, September/ October 2013 (Impact
Factor: 0.378).
29. HORODINCA M., SEGHEDIN N. E., CARATA E., BOCA M., FILIPOAIA C.,
CHITARIU D., Dynamic Characterization of a Piezoelectric Actuated Cantilever Beam Using
4
Energetic Parameters. Mechanics of Advanced Materials and Structures, Volume 21, Issue 2,
2014, pages 154-164 (impact factor 0,701).
30. SEGHEDIN N. E., CHITARIU Dragoș Florin, Software System For The
Development Of Morphological Matrixes Used In Technical Creation. The 10th International
Scientific Conference eLearning and software for Education, Bucharest, April 24-25, 2014,
10.12753/2066-026X-14-289 (indexed ISI).
31. SEGHEDIN N. E., HORODINCĂ M., CHITARIU D. F., DROSESCU R.,
Dynamic behavior of long turned workpieces. Innovative manufacturing engineering
international conference, IManE 2014 International Conference, May 29-30, 2014, Chişinău
(indexed SCOPUS).
32. SEGHEDIN N. E., CHITARIU D. F., The Tightening Accuracy of Workpieces in the
Multiple Clamping Devices, Innovative manufacturing engineering international conference,
IManE 2014 International Conference, May 29-30, 2014, Chişinău (indexed SCOPUS).
1. GHERGHEL N., SEGHEDIN N., BARENBOIM N., BEZRUCAV V., POPA GH.,
Sinteza creativă a mecanismelor de strângere multiplă prin metode logico-combinatorice,
Revista de inventică, Vol.1, An III, Nr. 4-5, 1992, pag. 37-43.
2. GHERGHEL N., SEGHEDIN N., The synthesis of the possible processing variants and
selection of optimum solution. I. Identification of the variable parameters of the processing
variants, Bul. Inst. Politehn. Iaşi, tom XXXVIII(XLII), fasc. 1-4, secţia V, Construcţii de Maşini,
1992, pag. 63-79.
3. GHERGHEL N., SEGHEDIN N., UNGUREANU C., CAZACU I., The synthesis on a
logical-combinatorial base of some new variants of centering-clamping mechanisms for toothing
operations, Bul. Inst. Politehn. Iaşi, tom XXXVIII(XLII), fasc. 1-4, secţia V, Construcţii de
Maşini, 1992, pp .82-89.
4. GHERGHEL N., SEGHEDIN N., BEZRUCAV V., Noi posibilităţi de materializare a
schemelor de strângere multiplă caracteristice, sintetizate prin metoda matricelor morfologice
de idei, Revista de inventică, Vol.2, An IV, Nr.10, 1993, pag.20-25.
5. GHERGHEL N., SEGHEDIN N., The synthesis of the possible processing variants and
the selection of the optimum solutions. II. The suggested methodology for the synthesis of the
possible processing variants and the selection of the optimum solutions, Bul.Inst.Politehn. Iaşi,
tom XXXIX(XLIII), fasc. 1-4, secţia V, Construcţii de Maşini, 1993, pag.159-186.
6. GOJINEŢCHI N., COZMÂNCĂ IRINA, SEGHEDIN N., UNGUREANU C.,
Theoretische Untersuchungen zur Synthese der Ausrichtungspläne der im Maschinenbau
Verwendeter Spannvorrichtungen. I. Aktuelles Stadium der Konzeption und der Konzepten sowie
neue Konzepten Hinsichtlich der Ausrichtung in Vorrichtungen, Bul.Inst.Politehn. Iaşi, tom
XXXIX(XLIII), fasc. 1-4, secţia V, Construcţii de maşini, 1993, pag.149-157.
7. GOJINEŢCHI N., COZMÎNCĂ I., UNGUREANU C. SEGHEDIN N., Theoretische
Untersuchungen zur Sznthese der Ausrichtungspläne der im Maschinenbau Verwendeter
Spannvorrichtungen. II. Untersuschungen zu den Theoretische Grundlagen der Erarbeitung von
Technisch Möglichen plänen zur Ausrichtung (SO-TP) von Werkstücken in Spannvorrichtungen
des Maschinenbaus, Bul.Inst.Politehn. Iaşi, tom XL(XLIV), fasc. 1-4, secţia V, Construcţii de
Maşini, 1994, pag.169-177.
8. GOJINEŢCHI N., SEGHEDIN N., UNGUREANU C., COZMÎNCĂ I., Ein
Vereinfacher Algoritmus zur Bestimmung der Ausrichtungsflächen der Werkstücke in den
Einspannvorrichtungen der Werkzeugmaschinen, Bul.Inst.Politehn. Iaşi, tom XLI(XLV), fasc. 3-
4, secţia V, Construcţii de Maşini, 1995, pag.83-89.
9. GHERGHEL N., SEGHEDIN N., Computer-aided structural synthesis methodology of
multiple clamping devices. I. The suggested structural synthesis methodology. Obtaining of the
5
possible combinations, Bul.Inst.Politehn. Iaşi, tom XLI(XLV), fasc. 1-2, secţia V, Construcţii de
Maşini, 1995, pag.71-82.
10. GHERGHEL N., SEGHEDIN N., Computer-aided structural synthesis methodology
of multiple clamping devices. II. Evaluation, selection and ordering of the combinations.
Materalization of the new combinations, Bul.Inst.Politehn. Iaşi, tom XLI(XLV), fasc. 3-4, secţia
V, Construcţii de Maşini, 1995, pag.75-82.
11. SEGHEDIN N., GHERGHEL N., Criterions for the systematization of the clamping
mechanisms into data basis, Bul Inst. Politehn.Iaşi, tom XLIV(XLVIII), supliment I, secţia V,
Construcţii de maşini, 1998, Lucrările Conferinţei Internaţionale Tehnologii Moderne în
Construcţia de Maşini, TMCM’98, Iaşi, 21-22 mai, 1998
12. UNGUREANU C., PLAHTEANU B., SEGHEDIN N., CROITORU I.,
UNGUREANU F., A synthesis of the Electrochemical Grinding Tools, Using the Logical-
combinatorical Methods, Bul.Inst.Politehn.Iaşi, editat de Univ.Tehn.”Gh.Asachi” Iaşi, tom XLV
(XLIX), fasc. 1-2, secţia Construcţii de Maşini, 1999, pag. 147 – 160.
13. SEGHEDIN N., Ierarhia descrierii mecanismelor de strângere multiplă, Revista de
inventică, 22-23, vol.IV, an X, 1999, p. 22-28.
14. GHERGHEL N., SEGHEDIN N., Etape şi resurse de structurare a algoritmilor
pentru prescrierea calităţii geometrice, Revista de inventică, 22-23, vol.IV, an X, 1999, pag. 29-
34.
15. SEGHEDIN N., Analiza structurală a mecanismelor de strângere multiplă,
Construcţia de maşini, (52), nr.11, 2000.
16. SEGHEDIN N., The Critical Thinking on the Technical Creation, Bul. Inst. Politehn.
Iaşi publicat de Univ. Tehn. “Gh. Asachi” Iaşi, tom XLVII (LI), Supliment, 2001, Secţia
Construcţii de maşini. Lucrări susţinute la Conferinţa Internaţională de Sisteme de Fabricaţie,
Iaşi, 12-13 oct., 2001.
17. DULHAI GH., GHERGHEL N., SEGHEDIN N., Utilisation of Pareto Diagrams as
an Investigation for the Quality Control of the Gas Exhausting System of the Car, Bul. Inst.
Politehn. Iaşi publicat de Univ. Tehn. “Gh. Asachi” Iaşi, tom XLVII (LI), Supliment, 2001,
Secţia Construcţii de maşini. Lucrări susţinute la Conferinţa Internaţională de Sisteme de
Fabricaţie, Iaşi, 12-13 oct., 2001, pag. 57 - 64.
18. GHERGHEL N., SEGHEDIN N., Algorithms for the Design and Carry on of
Statistical Control on the Products Reception (Algoritmi pentru elaborarea tehnologiei şi pentru
desfăşurarea controlului statistic de recepţie al produselor). Bul. Inst. Politehn. Iaşi, Tomul
XLVIII (LII), Fasc. 1-2, Secţia Constr. de maş., 2002, pag. 127-134 (Depusă la 30. 04. 2001).
19. SEGHEDIN N., Algorithmic and Heuristic in the Creative Synthesis of the Clamping
Devices. Bul. Inst. Politehn. Iaşi, Tomul XLIX (LIII), Supliment, Secţia Constr. de maş., 2003,
pag. 215-222.
20. SEGHEDIN N., Usage of the Hierarchical Description of the Technical Systems for
the Structuring the Creative Problems in the Field of the Clamping Devices. Bul. Inst. Politehn.
Iaşi, Tomul L (LIV), Fasc. Va, Secţia Constr. de maş., 2004, pag. 133-136.
21. SEGHEDIN N., Considerations On The Dynamic Behaviour Of The Multiple
Clamping Devices Of The Machine-Tools. Bul. Inst. Polit. Iaşi (publicat de Universitatea
Tehnică “Gh. Asachi” Iaşi), tomul LI (LV), fasc. 5, secţia Construcţii de Maşini, 2005, pag. 217-
222.
22. BABEII O., GHERGHEL N., SEGHEDIN N., The Elaboration Of A Decision-
Making Algorithm In The Technological Devices Domain. Bul. Inst. Polit. Iaşi (publicat de
Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LI (LV), fasc. 5, secţia Construcţii de Maşini,
2005, pag. 209-216.
23. SEGHEDIN N., The Dynamic Behavior of the Clamping Devices of the Workpieces
for Series and Parallel Clamping on Machine-Tools. Bul. Inst. Polit. Iaşi (publicat de
Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LII (LVI), fasc. 5A, secţia Construcţii de
Maşini, 2006, pag. 301-308.
6
24. IVAŞCU C., SEGHEDIN N., GHERGHEL N., Contributions On The Computer-
Assisted Modelling And Simulation Of The „Self-Aligning” Mandrels With Elastic Plane Bush.
Bul. Inst. Polit. Iaşi (publicat de Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LII (LVI), fasc.
5A, secţia Construcţii de Maşini, 2006, pag. 691-700.
25. SEGHEDIN N., From Lull’s Disks to Belousov’s Method of the Generalized Object of
the Technical Creation. Revista de inventică, nr. 54, vol.X, an XVI, 2006, pag. 16-27.
26. SEGHEDIN N., Visual Morphological Matrices in the Technical Creation. Revista de
inventică, nr. 55, vol. X, an XVI, 2006, pag. 13-26.
27. SEGHEDIN N., DROSESCU R., The Dynamic Behaviour of Series Multiple Fixtures.
Bul. Inst. Polit. Iaşi (publicat de Universitatea Tehnică “Gh. Asachi” Iaşi), tomul LIII (LVII),
fasc. 5, secţia Construcţii de Maşini, 2007, pag. 263-268.
28. GHERGHEL N., SEGHEDIN N., HANGANU A. C., The hierarchical description
of the technological devices’ hydraulic action. Bul. Inst. Polit. Iaşi (publicat de Universitatea
Tehnică “Gh. Asachi” Iaşi), tomul LIII (LVII), fasc. 5, secţia Construcţii de Maşini, 2007, pag.
245-254.
29. CHITARIU D., SEGHEDIN N., GHERGHEL N., Researches Regarding yhe
Relation Force-Deformations on Extensible Elastic Diaphragm Chuck With Jaws. The Annals of
„Dunărea de Jos” University of Galaţi, Fasc. V, Technologies in Machine Building, pag. 405-
410, ISSN 1221-4566, 2009.
30. HORODINCA M., CARATA E., SEGHEDIN N., BOCA M., CHITARIU D. și
FILIPOAIA C., Experimental Research On A Wideband Passive Dynamic Absorber Useful To
Increase The Boring Bars Stability. International Journal of Modern Manufacturing
Technologies (IJMMT), Vol. III, No. 2, 2011, pag. 49-54.
7
Lucrările Sesiunii de comunicări ştiinţifice “Concepţie, tehnologie şi management în construcţia
de maşini”, Iaşi, 22-23 mai, 1992, pag. 220-226.
8. GOJINEŢCHI N., MITROFAN AL., UNGUREANU C., SEGHEDIN N.,
Consideraţiuni privind instalarea şi extracţia pieselor din dispozitivele de prindere din
construcţia de maşini. Evaluarea curselor elementelor de strângere. În: Lucrările Sesiunii de
comunicări ştiinţifice “Concepţie, tehnologie şi management în construcţia de maşini”, Iaşi, 22-
23 mai, 1992, pag.189-193.
9. GHERGHEL N., SEGHEDIN N., Asupra morfologiei mecanismelor de strângere. În:
Simpozion Tehnomus VII, Tehnologii şi produse noi în construcţia de maşini, 4-6 iunie,
Suceava, 1993, pag. 27-34.
10. GHERGHEL N., CIOATĂ FL., UNGUREANU C., SEGHEDIN N., COZMÎNCĂ
I., PAPAGHIUC ŞT., Tolerarea asistată de calculator a roţilor dinţate şi angrenalelor
cilindrice. În: Simpozion Tehnomus VII, Tehnologii şi produse noi în construcţia de maşini, 4-6
iunie, Suceava, 1993, pag.243-249.
11. GHERGHEL N., UNGUREANU C., SEGHEDIN N., Metodologie de tolerare a
abaterilor de formă. În: Simpozionul Ştiinţific TEHNOMUS, ediţia a VIII-a, Universitatea
“Ştefan cel Mare” Suceava, 26-27 mai, 1995, pag. 95-102.
12. GHERGHEL N, SEGHEDIN N., UNGUREANU C., Algoritm pentru prescrierea
rugozităţii suprafeţelor. În: Lucrări ale Conferinţei Naţionale “Optimizarea proiectării şi
tehnologiilor de prelucrare în construcţia de maşini”, ediţia I, Universitatea Bacău, 26-28 oct.,
1995, pag. 259-265.
13. GOJINEŢCHI N., SEGHEDIN N., UNGUREANU C., GOJINEŢCHI DANA, Unele
consideraţii privind definirea şi stabilirea parametrilor geometrici care determină concepţia
dispozitivelor, TMCM’ 96, Catedra T.C.M., Iaşi, 1996, pag. 45-51.
14. SEGHEDIN N., Considerarea elementelor de strângere ca obiecte în sinteza
mecanismelor de strângere multiplă cu ajutorul programării orientate pe obiecte, Simpozion
ştiinţific omagial, Universitatea de Nord Baia-Mare, 15-16 mai, 2001.
15. SEGHEDIN N., Concepţia şi proiectarea asistată de calculator a dispozitivelor
tehnologice. Simpozionul Jubiliar Pro-Performanţă, Aerostar S.A. Bacău, 15 aprilie, 2003
(http://www.aerostar.ro/simpozion_inginerie).
16. SEGHEDIN N., De la discurile lui Lull la metoda obiectului generalizat al creaţiei
tehnice. CITIUS, ALTIUS, FORTIUS. Omagiu Maestrului. Institutul Naţional de Inventică Iaşi:
Ed. Performantica, 2005, pag. 49-70.
17. SEGHEDIN N., Profesorul Belousov. in: BORIS PLAHTEANU (ed.), N.
SEGHEDIN, H. N. TEODORESCU, L. SLATINEANU, C. CHIRIŢĂ, T. D.STANCIULESCU,
M. CALUSCHI, R. G. GROSU, H. C. CHIRIAC. Creatorul Şcolii de Inventica. E Ziua
Magistrului. Ed. Performantica, Iaşi, 2010, pag. 47-49.
18. SEGHEDIN N., Profesorul Belousov şi undele lui Kondratiev. În: BORIS
PLAHTEANU (ed.), N. SEGHEDIN, H. N. TEODORESCU, L. SLATINEANU, C.
CHIRIŢĂ, T. D. STANCIULESCU, M. CALUSCHI, R. G. GROSU, H. C. CHIRIAC.
Creatorul Şcolii de Inventica. E Ziua Magistrului. Ed. Performantica, Iaşi, 2010, pag. 93-97.
19. GHERGHEL N., SEGHEDIN N., Methodology for the computer-assisted structural
synthesis of the clamping devices, The sixth IFToMM International Symposium on Linkages and
Computer Aided Design Methods-Theory and Practice of Mechanisms, Bucarest, Romania, June
1-5, 1993, vol. III, paper 14, pag.89-96.
20. SEGHEDIN N., Efecte, principii şi legi fizice utilizate la prinderea pieselor în
dispozitive, A X-a ed.a Conf. cu partcip. internaţ. Tehnomus. Tehnol.şi prod. noi în constr. de
maş., Suceava, 28-29 mai, 1999.
21. GHERGHEL N., SEGHEDIN N., Consideraţii asupra diagramelor cauză-efect
utilizate în controlul calităţii, A X-a ed.a Conf. cu partcip. internaţ. Tehnomus. Tehnol.şi prod.
noi în constr. de maş., Suceava, 28-29 mai, 1999.
8
22. SEGHEDIN N., GHERGHEL N., Utilizarea combinatoricii în creaţia ştiinţifică şi
tehnică (rezumat). Ed. a XVI-a a Simpozionului Internaţional Inventica-Performanţă şi
Creativitate Tehnică. Iaşi, 26-30 mai, 2004, p. 263.
23. SEGHEDIN N., Utilizarea matricelor morfologice vizuale în creaţia tehnică. A
XVIII-a Conferinţă internaţională de inventică „Cercetări şi tehnologii inovative performante”,
5-8 iulie, 2006, Iaşi, pag. 130-144.
24. SEGHEDIN N., The Curve of Technical Progress and Kondratiev’s Waves. The XIV
th International Conference of Inventics „Inventica 2010” June 9-11, 2010, Iasi, Romania, pag.
346-351.
25. BLAGA M., SEGHEDIN N. E., CIOBANU ANA RAMONA, WARP KNITTED
FABRICS BEHAVIOUR UNDER DYNAMIC TESTING, 46th International Congress IFKT, 6
- 8 September 2012, Sinaia, Romania, pag. 876-883, www.ifkt.ro , ISBN 978-973-730-962-4.
26. HORODINCĂ, M., CARATA, E., SEGHEDIN, N. E., BOCA, M., FILIPOAIA,
C., CHITARIU, D. (2011), A Study On The Resources Of The Wideband Passive Dynamic
Absorbers On Improving The Stability Of Boring Bars, Proceedings of ModTech 2011, Modern
Technologies, Quality and Innovation - New face of TMCR, Vol. 1, pag. 485-488, Chisinau, 25-
27 May, 2011.
27. SEGHEDIN N., A Systemic Approach to the Framing Process Concerning the
Procedures Used in Teaching at Higher Education Level. “E” Era & Higher Education,
Proccedings of the 7th International Conference Quality Management in Higher Education, Iaşi,
16th-17th november, 2012, pag. 153-160, Österreichische Computer Gesellschaft Komitee für
Öffentlichkeitsarbeit.
9
9. HANGANU A. C., GHERGHEL N., SEGHEDIN N., Considerations on
Technological Devices (Consideraţii asupra dispozitivelor tehnologice). Meridian Ingineresc, nr.
2, 2002, Ed. Tehnica-Info, Chişinău.
10. SEGHEDIN N., Study Of The Dynamic Behavior Of The Multiple Clamping Devices
During The Milling Operations. Proceedings of 7th International Carpathian Control Conference
ICCC’ 2006, Ostrava-Beskydy, Czech Republic, May 29-31, 2006, pag. 493-496.
11. SEGHEDIN N., The IP Road Map for Romanian Universities. Disseminating IP
Knowledge in universities. Follow-up Conference on Roving workshops. European Patent
Office, Hague, 2-3 december 2008. In Roving Workshop Reports. Disseminating IP knowlwdge
in universities. Volume 2. European Patent academy, Academia and IP Research Unit.
12. SEGHEDIN N. and CHITARIU D., The Intelligent Conceiving And Design Of The
Multiple Fixtures. The 5th International Symposium on Novelties in Graphics, Ljubljana,
Slovenia, 27–29 May, 2010, pag. 671-677.
13. SEGHEDIN N. E., BLAGA M. and R. CIOBANU, Weft Knitted Fabrics Behaviour
Under Dynamic Testing, 12th World Textile Conference AUTEX, June 13th to 15th 2012, Zadar,
Croatia, pag. 455-461, ISBN 978-953-7105-47-1, www.ttf.unizig.hr.
14. SLĂTINEANU L., COTEAȚĂ M., GHERMAN L., BEȘLIU I., DODUN O.,
SEGHEDIN N., Using Creative Resources In Applying Axiomatic Design. Proceedings of
ICAD2013 The Seventh International Conference on Axiomatic Design Worcester – June 27-28,
2013.
F. Oral presentations
10
11. SEGHEDIN N., VOICU M., TODEREAN DELIA, MARIAN SABINA, Quality
Culture Development in Higher Education – A Systemic Approach. International Conference
Institutional Strategic Quality Management: From Minimum Requirements to Overall Quality
Improvement, 14-17 october, 2009.
12. SEGHEDIN N., Originile utilizării metodei morfologice în creaţia ştiinţifică şi
tehnică. Al treilea Simpozion de Istoria Învăţământului şi Ştiinţelor Tehnice din Iaşi, 11 nov.
2011, Universitatea Tehnică “Gheorghe Asachi” din Iaşi.
13. SEGHEDIN N., The quality culture in higher education. 1st SMARTEX International
Textile Conference Kafrelsheikh University, 22-24 november 2011, Kafrelsheikh, Egipt.
14. SEGHEDIN N., Undele lui Kondratiev şi undele lui Schumpeter. Simpozionul de
istoria învăţământului şi ştiinţelor tehnice. Ed. a IV-a, Zilele Universităţii Tehnice “Gheorghe
Asachi” din Iaşi, 16 nov. 2012.
15. SEGHEDIN N., Inventica și provocările lumii contemporane. Conferința Premiază
inovația: Alevandru Mironov, Boris Plahteanu și Neculai Eugen Seghedin. Iași, 23 mai 2013, 3M
și Universitatea Tehnică “Gheorghe Asachi” din Iaşi.
16. SEGHEDIN N., Teaching Intellectual Property in Romania. Inter-regional Meeting
Teaching Intellectual Property organized by World Intellectual Property Organization, Sibiu, 19-
20 june, 2013.
17. SEGHEDIN N., Picturile din Aulă. Simpozionul de istoria învăţământului şi ştiinţelor
tehnice. Ed. a V-a, Zilele Universităţii Tehnice “Gheorghe Asachi” din Iaşi, 13 nov. 2013.
G. Patents
11
H. Patent applications
I. Grants (director)
J. Grants (member)
12
5. SEGHEDIN N., Utilizarea algoritmilor genetici în sinteza creativă a dispozitivelor
tehnologice (responsabil temă). În cadrul contractului cu tema Cercetãri multidisciplinare în
domeniul tehnologiilor informaţionale bazate pe algoritmi genetici, reţele neuronale şi sisteme
fuzzy pentru inginerie şi management. Contract CERES, nr. 29/15.11.2002/ IFA Bucureşti,
valoare 1.064.320 mii lei. Partener: Institutul de Informatica Teoretica al Academiei Române
Iaşi. Director proiect, prof. dr. OCTAV BRUDARU.
6. GHERGHEL N., SEGHEDIN N., UNGUREANU C., CROITORU I., CIOATĂ
F., DULHAI GH., HANGANU A., GIURA AL., POROF I., VELIŞCU C., POPA R.,
ŢĂRANU R., MALCOCI I., CARP M., ACATRINEI A., Elaborarea unei baze electronice de
date pentru proiectarea elementelor de orientare-poziţionare din structura dispozitivelor
tehnologice. Faza 1.1/ 2002: Achiziţia, prelucrarea pe baze ştiinţifice a datelor, stabilirea
principiilor, criteriilor, regulilor de clasificare a datelor, structurarea datelor. Proiect de cercet.
finanţat de la bugetul de stat, tip A, MEC ─ CNCSIS, cod CNCSIS 154, 2002 (valoare: 50 000
000 lei).
7. GHERGHEL N., SEGHEDIN N., UNGUREANU C., CROITORU I., CIOATĂ
F., DULHAI GH., HANGANU A., GIURA AL., POROF I., VELIŞCU C., POPA R.,
ŢĂRANU R., MALCOCI I., CARP M., ACATRINEI A., Elaborarea unei baze electronice de
date pentru proiectarea elementelor de orientare-poziţionare din structura dispozitivelor
tehnologice. Faza 1.1/ 2003: Completarea datelor necesare proiectării integrale asistate de
calculator a elementelor de orientare-poziţionare din structura dispozitivelor. Elaborarea
unor norme de tipizare pentru elementele de orientare-poziţionare din structura
dispozitivelor. Proiect de cercet. finanţat de la bugetul de stat, tip A, MEC ─ CNCSIS, cod
CNCSIS 318, 2003 (valoare: 46 800 000 lei).
8. GHERGHEL N., SEGHEDIN N., UNGUREANU C., CROITORU I., CIOATĂ
F., DULHAI GH., HANGANU A., GIURA AL., POROF I., VELIŞCU C., POPA R.,
ŢĂRANU R., MALCOCI I., CARP M., ACATRINEI A Elaborarea unei baze electronice de
date pentru proiectarea elementelor de orientare-poziţionare din structura dispozitivelor
tehnologice. Faza 1.1/ 2004 (faza finală, unică): Structurarea bazei şi elaborarea
instrucţiunilor şi regulilor de utilizare a bazei electronice de date pentru proiectarea
elementelor de orientare-poziţionare (reazemelor) din structura dispozitivelor tehnologice.
Faza suplimentară: Extensia bazei de date pentru proiectarea elementelor de orientare-
poziţionare (reazemelor) din structura dispozitivelor tehnologice. Proiect de cercet. finanţat de la
bugetul de stat, tip A, MEC ─ CNCSIS, cod CNCSIS 318, 2004 (valoare: 90 000 000 lei + 27
000 000 = l17 000 000 lei).
9. PLAHTEANU BORIS (director de proiect), SEGHEDIN N. (membru colectiv din
2005) ş. a., Echipament multifuncţional modular, flexibil, pentru prelucrări mecanice, deformare
plastică şi vulcanizare, destinat atelierelor IMM. Programul Naţional RELANSIN, contract nr.
2062/ 01.10.2004. Autoritatea contractantă AMCSIT-Politehnica Bucureşti, titular TUIASI –
CCPTT “Polytech” (valoare et. 1/ 2004, 80.000.000 lei, valoare 2005 225.000.000 lei) (6
membri din cadrul TUIASI).
10. HANGANU RADU (director de proiect), SEGHEDIN N. (membru colectiv) ş. a.,
Tehnologie şi sisteme de interconectare flexibile pentru instalaţii hidraulice şi pneumatice.
Programul Naţional INVENT, contract nr. 135/ 28.09.2004. Autoritatea contractantă INMA
Bucureşti, titular Institutul Naţional de Inventică Iaşi (valoare 2004 45.000.000 lei, valoare 2005
100.000.000 lei) (7 membri din cadrul TUIASI).
11. HANGANU ADRIAN CONSTANTIN (director de proiect), SEGHEDIN N.
(responsabil proiect) ş.a., Tehnologie si instalaţii hidraulice modulare, flexibile, pentru încercari
statice si dinamice la presiune, forţă şi torsiune a instalaţiilor tehnologice. Programul Naţional
INVENT, contract nr. 169/ 15.10. 2004. Autoritatea contractantă INMA Bucureşti, Titular
TUIASI – CCPTT “Polytech”, (valoare et. 1/ 2004 300.000.000 lei, valoare 2005 250.000.000
lei) (8 membri din cadrul TUIASI).
13
12. GHERGHEL N. (director proiect), SEGHEDIN N. ş. a., Elaborarea fondului
standard specializat de idei de creaţie în domeniul tehnologiei şi dispozitivelor tehnologice.
Proiect multianual de cercetare ştiinţifică finanţat de la bugetul de stat, tip A, Univ. Tehn. “Gh.
Asachi” Iaşi, CCTT Polytech – MEC ─ CNCSIS, cod CNCSIS 480, contract nr. 27.637/
14.03.2005, tema 27, 2005 (valoare: 150.000.000 lei).
13. NAGÎŢ GH., Cercetări privind inovarea şi optimizarea dispozitivelor de strângere
acţionate cu echipamente hidraulice modulare prin utilizarea de concepte mecatronice,
modelării matematice şi simulării numerice în scopul creşterii performanţelor. Proiect CEEX/
13.03.2005 (valoare 2005 750 mil. lei) (14 membri din cadrul TUIASI).
14. GHERGHEL N. (director proiect), SEGHEDIN N. ş. a., Elaborarea fondului
standard specializat de idei de creaţie în domeniul tehnologiei şi dispozitivelor tehnologice.
Proiect multianual de cercetare ştiinţifică finanţat de la bugetul de stat, tip A, Univ. Tehn. “Gh.
Asachi” Iaşi, CCTT Polytech – MEC ─ CNCSIS, cod CNCSIS 480, contract nr. A1/ GR 164/
19.05.2006, tema nr. 37, 2006 (valoare: 150.000.000 lei/ 15.000 RON).
15. NAGÎŢ GH., Cercetări privind inovarea şi optimizarea dispozitivelor de strângere
acţionate cu echipamente hidraulice modulare prin utilizarea de concepte mecatronice,
modelării matematice şi simulării numerice în scopul creşterii performanţelor. Proiect CEEX/
13.03.2005 (valoare 2006 375.000 RON) (17 membri din cadrul TUIASI în anul 2006).
16. NAGÎŢ GH., Cercetări privind inovarea şi optimizarea dispozitivelor de strângere
acţionate cu echipamente hidraulice modulare prin utilizarea de concepte mecatronice,
modelării matematice şi simulării numerice în scopul creşterii performanţelor. Proiect CEEX/
13.03.2005 (valoare 2007 275.000 RON) (17 membri din cadrul TUASI în anul 2007).
17. CRANGASU M. (manager proiect), TEODOSIU C., LUPU L., SEGHEDIN N.
ş.a. ,Îmbunătăţirea managementului universitar. POS-DRU /2/1.2/S/4 2009-2010 (buget 5 mil
euro).
18. GUȘĂ M. (manager proiect), Specializarea personalului didactic universitar pentru
functia dr cadru didactic supervisor de practica tehnologica si de cercetare. Proiect POSDRU
57/ 1.3/ S/ 17884, 2010-2012.
19. POPA Fl. (manager de proiect), SEGHEDIN N. (persoană de contact pentru Univ.
Tehn. “Gheorghe Asachi”), Managementul corelării sistemului de învăţământ cu piaţa muncii.
Proiect POSDRU, 86/ 1.2/S/ 52422, 2007-2013.
20. NAGÎŢ GH. (director proiect) ş.a., Injection Moulding of Titanium Powders for
Biomedical Applications. Horizontal Research Activities Involving SMEs, FP6-2002-SME-1,
october 2005 (71.500 EUR) (16 membri din cadrul TUIASI).
21. DUMITRAȘ C. (responsabil din partea TUIASI) SEGHEDIN N. (membru) ş.a.,
Leonardo TR/06/B/F/PP/178011 – 2006-2008, Community Vocational Training Action
Programme. Tema: Virtual Training Center for CNC (VTC). Autoritate contractantă: Agenţia
Naţională Leonardo Turcia. Parteneri: Selcuk University Konya, Turkey, Technical University of
Crete, Chania, Greece, Universitatea Tehnică “Gheorghe Asachi”, Iasi, Romania (valoare
contract: 21.000 Euro) (1 Euro = 3,64 RON) (76.440 RON).
K. Awards
14
5. Diploma de excelenţă şi medalia de argint, Salonul internaţional jubiliar al cercetării,
invenţiilor şi transferului tehnologic Inventica 2008, 14-24 mai 2008, Iaşi, România.
6. Diploma de excelenţă şi Medalia de aur „Inventica 2009”, The 13th International
Exhibition of Research, Innovation and Technological Transfer, Inventica 2009, 4-6 iunie, 2009,
Iaşi, Romania.
7. Diploma de onoare, The XIV-th International Conference „Inventica 2010”, 9-10
iunie, Iaşi, Romania.
8. Medalia de aur „Henri Coanda”, The XVth International Exhibition af Research,
Innovation and Technological Transfer „INVENTICA 2011”, 8-10 June 2011, Iasi, Romania.
9. Diploma de onoare, The XVth International Exhibition af Research, Innovation and
Technological Transfer „INVENTICA 2011”, 8-10 June 2011, Iasi, Romania.
10. MIRELA BLAGA, NECULAI EUGEN SEGHEDIN, DRAGOS CHITARIU,
Diploma Gold medal. The XVIth International Exhibition of Research, Innovation and
technological Transfer, Inventica 2012, Iasi, 13-15 Iunie 2012 (diploma si medalie de aur pentru
inventia "Ac de tricotat pentru masini rectilinii de tricotat din batatura").
11. MIRELA BLAGA, NECULAI EUGEN SEGHEDIN, DRAGOS CHITARIU,
Diploma Gold medal, VIII International Salon of Inventics, New Time, September 27-29, 2012,
Sevastopol, Ukraina (diploma și medalie de argint pentru invenția "Knitted Liner for Protective
Helmets").
12. HORODINCĂ M., SEGHEDIN N., CARATA E., CHITARIU D., FILIPOAIA C.,
BOCA M., Diploma Medal „Inventica”. The XVIth International Exhibition of Research,
Innovation and technological Transfer, Inventica 2012, Iasi, 13-15 Iunie 2012 (Diploma și
medalia „Inventica” pentru invenția “Sistem de micropoziționare, microorientare și
microdeplasare cu șase grade de libertate”).
13. SEGHEDIN N., CIONCA DAN., COJOCARU I., DROSESCU R., IVASCU C.,
Diploma Gold Medal, The XVIth International Exhibition of Research, Innovation and
technological Transfer, Inventica 2012, Iasi, 13-15 Iunie, 2012 (Diploma și Medalia de aur
pentru invenția „Stand pentru determinarea stabilității implanturilor ortopedice”).
14. SEGHEDIN N., Diploma de excelență și medalia de aur, Salonul Internațional de
Inventică PROINVENT, ed. a X-a, 2012, Cluj-Napoca (pentru grup de invenții).
15. SEGHEDIN N., CIONCA DAN., COJOCARU I., DROSESCU R., IVASCU C.,
„Stand pentru determinarea stabilității implanturilor ortopedice”, Diploma de excelență și
medalia de aur, Salonul Internațional de Inventică PROINVENT, ed. a XI-a, 2013, Cluj-Napoca.
16. SEGHEDIN N., Diplomă de excelență, Congresul Internațional Pregătim viitorul,
promovând excelența, Iași. 7-9 martie, 2013.
17. SEGHEDIN N., Special Diploma and Scientific Order Leonardo da Vinci, for
scientifical and technical creativity. Romanian Inventors Forum, 10.05.2013.
18. SEGHEDIN N., CIONCA DAN., COJOCARU I., DROSESCU R., IVASCU C.,
Installation for the Study of the Stability of Implants Used in Treating Femoral Neck Fractures.
Gold Medal, EUROINVENT, European Exhibition of Creativity and Innovation, Iași, 11 may
2013.
19. BLAGA MIRELA, SEGHEDIN N., CHITARIU DRAGOȘ., Knitting Needle for
Weft Flat Knitting Machines. Silver Medal, EUROINVENT, European Exhibition of Creativity
and Innovation, Iași, 11 may 2013.
15