Documente Academic
Documente Profesional
Documente Cultură
From Wikipedia, the free encyclopedia Jump to: navigation, search This is an incomplete list of DIN standards.
The "STATUS" column gives the latest known status of the standard. o If a standard has been withdrawn and no replacement specification is listed, either the specification was withdrawn without replacement or a replacement specification could not be identified. DIN stands for "Deutsches Institut fr Normung", meaning "German institute for standardisation". DIN standards that begin with "DIN V" ("Vornorm", meaning "preissue") are the result of standardization work, but because of certain reservations on the content or because of the divergent compared to a standard installation procedure of DIN, they are not yet published standards.
Contents
1 DIN 1 to DIN 999 o 1.1 DIN 1 to DIN 99 o 1.2 DIN 100 to DIN 199 o 1.3 DIN 200 to DIN 299 o 1.4 DIN 300 to DIN 399 o 1.5 DIN 400 to DIN 499 o 1.6 DIN 500 to DIN 599 o 1.7 DIN 600 to DIN 699 o 1.8 DIN 700 to DIN 799 o 1.9 DIN 800 to DIN 899 o 1.10 DIN 900 to DIN 999 2 DIN 1000 to DIN 9999 o 2.1 DIN 1000 to DIN 1999 o 2.2 DIN 2000 to DIN 2999 o 2.3 DIN 4000 to DIN 4999 o 2.4 DIN 5000 to DIN 5999 o 2.5 DIN 6000 to DIN 6999 o 2.6 DIN 7000 to DIN 7999 o 2.7 DIN 8000 to DIN 8999 o 2.8 DIN 9000 to DIN 9999 3 DIN 10000 to DIN 19999 o 3.1 DIN 10000 to DIN 10999 o 3.2 DIN 11000 to DIN 11999 o 3.3 DIN 12000 to DIN 12999 o 3.4 DIN 13000 to DIN 13999 o 3.5 DIN 14000 to DIN 14999 o 3.6 DIN 15000 to DIN 15999 o 3.7 DIN 16000 to DIN 16999 o 3.8 DIN 17000 to DIN 17999
3.9 DIN 18000 to DIN 18999 3.10 DIN 19000 to DIN 19999 4 DIN 20000 to DIN 29999 o 4.1 DIN 24000 to DIN 24999 o 4.2 DIN 28000 to DIN 28999 5 DIN 30000 to DIN 39999 o 5.1 DIN 31000 to DIN 31999 6 DIN 40000 to DIN 49999 7 DIN 50000 to DIN 59999 8 DIN 60000 to DIN 69999 9 DIN 70000 to DIN 79999 10 See also
o o
11 External links
DIN 5
DIN 510
DIN 6
DIN 7 DIN 11
Cone Pins, Withdrawn DIN EN 22339 untempered Standard Withdrawn measurements Technical drawings Axonometric DIN ISO 5456-1, DIN ISO 5456-2, Withdrawn projections, DIN ISO 5456-3, DIN ISO 5456-4 Isometric projection Technical drawings Withdrawn DIN ISO 10209-2 projections, terms Projection displays in Normal, Withdrawn DIN ISO 128, DIN EN ISO 128 views and special presentations Parallel Pins Withdrawn DIN EN ISO 2338 Whitworth Withdrawn pipe threads 1/4"-6" Thread diameter, sizes, teaching
ISO 10209-2
ISO 128
ISO 2338
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 13-1
DIN 13-2
DIN 13-3
DIN 13-4
information ISO general purpose metric screw threads - Part 1: Nominal sizes for Active coarse pitch threads; nominal diameter from 1 mm to 68 mm ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, Active 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm ISO general purpose metric screw threads - Part 3: Nominal sizes for Active 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm ISO general Active purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 13-5
DIN 13-6
DIN 13-7
DIN 13-8
diameter from 5 mm to 110 mm ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and Active 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm ISO general purpose metric screw threads - Part 6: Nominal sizes for Active 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm ISO general purpose metric screw threads - Part 7: Nominal sizes for Active 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm ISO general Active purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads;
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 13-9
DIN 13-10
DIN 13-11
DIN 13-12
nominal diameter from 28 mm to 300 mm ISO general purpose metric screw threads - Part 9: Nominal sizes for Active 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm ISO general purpose metric screw threads - Part 10: Nominal sizes for Active 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm ISO general purpose metric screw threads - Part 11: Nominal sizes for Active 8 mm fine pitch threads; nominal diameter from 130 mm to 1000 mm ISO general Active purpose metric screw threads - Part 12: 1 to 300 mm diameter coarse and
DIN
TITLE fine pitch threads Selected diameters and pitches ISO general purpose metric screw threads - Part 13: Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes ISO general purpose metric screw threads - Part 19: Nominal profiles ISO general purpose metric screw threads - Part 20: Limits of sizes for coarse pitch threads with the preferred tolerance classes; nominal sizes from 1 mm to 68 mm ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the preferred tolerance classes;
STATUS
DIN REPLACEMENT
DIN 13-13
Active
DIN 13-19
Active
DIN 13-20
Active
DIN 13-21
Active
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 13-22
DIN 13-23
DIN 13-24
Nominal diameter from 1 mm to 24,5 mm ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 25 mm to 52 mm ISO general purpose metric screw threads - Part 23: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 53 mm to 110 mm ISO general Active purpose metric screw threads - Part 24: Limits of sizes for fine pitch threads with the preferred tolerance classes; Nominal diameter from 112 mm to
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 13-25
DIN 13-26
DIN 13-28
180 mm ISO general purpose metric screw threads - Part 25: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 182 mm to 250 mm ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the Active preferred tolerance classes; Nominal diameter from 252 mm to 1000 mm ISO general purpose metric screw threads - Part 28: Coarse and Fine Screw Threads from 1 to 250 mm Active Screw Thread Diameter; Root Crosssections, Tensile Stress Cross-sections and Pitch Angles
DIN
TITLE
STATUS
DIN REPLACEMENT
ISO general purpose metric screw threads - Part 50: DIN Combination Active 13-50 of tolerance classes for formed internal screw threads ISO general purpose metric screw threads - Part 51: External screw threads for transition DIN fits (former: Active 13-51 screw threads for interference fit); tolerances, limit deviations, limits of sizes ISO general purpose metric screw threads - Part DIN 52: Multi-start Active 13-52 thread tolerances and deviation of profile Oblique Standard DIN 16 Withdrawn Typeface for Drawings Upright Standard DIN 17 Withdrawn Typeface for Drawings DIN Thread run- Active 76-1 outs and thread
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 76-2
DIN 76-3
undercuts for ISO metric threads in accordance with DIN 131 Thread runouts and thread undercuts for Active pipe threads conforming to ISO 228 part 1 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Active Knuckle Threads and other Threads of Coarse Pitch Protrusions of Active bolt ends DIN EN ISO 4753 (governs thread ends for bolts assembled with ISO 4753 hexagon slotted nuts) ISO 1207
DIN 78
DIN 84
DIN 96
Product grade A slotted Withdrawn DIN EN ISO 1207 cheese head screws Product grade A slotted pan Withdrawn DIN EN ISO 1580 head screws Tab washers Withdrawn DIN EN ISO 1234 with long tab Split pins Withdrawn DIN EN ISO 1234 Slotted Raised Countersunk Active (Oval) Head Wood Screws Slotted Round Head Wood Active Screws
DIN
TITLE ISO Metric Trapezoidal Screw Thread; Profiles ISO Metric Trapezoidal Screw Thread; General Plan ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose ISO Metric Trapezoidal Screw Thread; Nominal Dimensions ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for
STATUS
DIN REPLACEMENT
DIN 103-1
DIN 103-2
DIN 103-3
DIN 103-4
DIN 103-5
DIN 103-6
DIN
TITLE
STATUS
DIN REPLACEMENT
Nut Threads from 105 to 300 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for DIN 103-7 Bolt Threads from 8 to 100 mm Nominal Diameter ISO Metric Trapezoidal Screw Threads; Limiting Sizes for DIN 103-8 Bolt Threads from 105 to 300 mm Nominal Diameter ISO metric trapezoidal screw threads; gauging of external and DIN 103-9 internal threads; gauge dimensions and design features DIN V 105-1 Clay Withdrawn DIN V 105-100, DIN EN masonry 771-1 units - Part 1: Solid and hollow bricks with density
EN 771-1
DIN
TITLE
STATUS
DIN REPLACEMENT
classes of 1,2 Clay masonry units - Part 2: Solid and DIN V 105-100, DIN EN DIN V 105-2 hollow Withdrawn 771-1 bricks with density classes equal 1.0 Clay masonry units - Part 3: Tile and DIN V 105-100, DIN EN DIN 105-3 high Withdrawn 771-1 strengthhighstrength clinker Clay Withdrawn masonry DIN V 105-100, DIN EN DIN 105-4 units - Part 771-1, 4: Ceramic DIN EN 772-7 bricks Clay masonry units - Part 5: Lightweight DIN 105-5 Active long-hole brick and light longhole brick panels Clay masonry units - Part DIN V 105-6 Active 6: High precision units DIN V 105- Clay Active 100 masonry units - Part 100: Clay masonry units with
EN 771-1
EN 771-1
EN 771-1, EN 772-7
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 125
DIN 125-1
DIN 125-2
DIN 126
DIN 127
DIN 128
specific properties Washers; DIN EN ISO 7089, medium DIN EN ISO 7090 type, Withdrawn primarily for hexagon bolts Product grade A washers with a hardness up DIN EN ISO 7089, to 250 HV Withdrawn DIN EN ISO 7090 designed for use with hexagon head bolts and nuts Product grade A washers with a hardness up DIN EN ISO 7089, to 300 HV Withdrawn DIN EN ISO 7090 designed for use with hexagon head bolts and nuts Product grade C washers designed for Withdrawn DIN EN ISO 7091 use with hexagon head bolts and nut Spring lock Withdrawn washers with square ends or tang ends Curved and wave spring Withdrawn lock washers
ISO 7091
STATUS Withdrawn
DIN REPLACEMENT
Technical drawings; Hatchings; DIN 201 Representation Withdrawn DIN ISO 128-50 of cutting edges and materials Machine Reamers with DIN 209 Active Screwed-on Blades Fasteners Part 1: Technical DIN 267-1 delivery Withdrawn conditions; General requirements Fasteners Part 2: Technical delivery conditions; Bolts, Screws, DIN 267-2 Nuts and Active DIN EN ISO 4759-1 Similar Threaded and Formed Parts; Types and Dimensional Accuracy DIN 267-3 Fasteners Withdrawn DIN EN ISO 898-1 Part 3: Technical delivery conditions; Property classes for
ISO 128-50
ISO 4759-1
ISO 898-1
DIN
TITLE
DIN 267-4
DIN 267-5
DIN 267-6
DIN 267-7
DIN 267-9
carbon steel and alloy steel bolts and screws; Conversion of property classes Fasteners Part 4: Technical delivery conditions; Withdrawn DIN EN ISO 898-2 Property classes for nuts (previous classes) Fasteners Part 5: Technical delivery conditions; Acceptance Withdrawn DIN EN ISO 3269 inspection; modified version of ISO 3269, 1984 edition Fasteners Part 6: Technical delivery conditions; Active Designs and accuracy of measurement for product grade F Fasteners Part 9: Technical delivery conditions; Withdrawn DIN EN ISO 898-1 Bolts made of unalloyed or low-alloy steels Fasteners Withdrawn DIN EN ISO 4042
ISO 898-2
ISO 3269
ISO 898-1
ISO 4042
DIN
TITLE
DIN 267-10
DIN 267-11
DIN 267-12
DIN 267-13
Part 9: Technical delivery conditions; Components with Electroplated Coatings Fasteners Part 10: Technical delivery Withdrawn DIN EN ISO 10684 conditions; Hot dip galvanized parts Fasteners Part 11: Technical delivery conditions (with additions Withdrawn to ISO 3506); Corrosionresistant stainless steel fasteners Fasteners Part 12: Technical delivery Withdrawn DIN EN ISO 2702 conditions; Self-tapping screws Fasteners Active Part 13: Technical delivery conditions; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low
ISO 10684
ISO 2702
DIN
TITLE Temperature or from Materials with a High Temperature Strength Fasteners Part 15: Technical delivery conditions; Prevailing torque type nuts Fasteners Part 18: Technical delivery conditions; Components made of Nonferrous Metals Fasteners Part 19: Technical delivery conditions; Surface discontinuities on bolts and screws Fasteners Part 20: Technical delivery conditions; Surface discontinuities on nuts Fasteners Part 21: Technical delivery conditions; Widening test on nuts Fasteners -
DIN 267-15
DIN EN ISO 2320, DIN EN ISO 3506-1, Withdrawn DIN EN ISO 3506-2, DIN EN ISO 3506-3
DIN 267-18
ISO 8839
DIN 267-19
Withdrawn
DIN 267-20
DIN EN ISO 6157-2, Withdrawn DIN EN ISO 10484, DIN EN ISO 10485
DIN 267-21
DIN EN ISO 6157-2, Withdrawn DIN EN ISO 10484, DIN EN ISO 10485 Withdrawn DIN EN ISO 898-6
DIN 267-23
DIN
TITLE
DIN 267-24
DIN 267-25
DIN 267-26
DIN 267-27
DIN 267-28
Part 23: Technical delivery conditions; Property classes for nuts with fine thread (ISO classes) Fasteners Part 24: Technical delivery conditions; Active Property classes for nuts (Hardness classes) Fasteners Part 25: Technical delivery conditions; Withdrawn DIN EN 20898-7 Torsion testing of M1 to M10 bolts and screws Fasteners Part 26: Technical delivery conditions; Active Conical spring washers for bolt/nut assemblies Fasteners Part 27: Technical specifications; Active Steel screws, bolts and studs with adhesive coating Fasteners Active Part 28: Technical
EN 20898-7
DIN
TITLE
DIN 267-29
DIN 267-30
DIN 276-1
DIN 276-2
DIN 276-3
specifications; Steel screws, bolts and studs with locking coating Fasteners Part 29: Technical specifications; Product grades for parts for bolted Withdrawn connections for use at temperatures ranging from -200C to +700C Fasteners Part 30: Technical specifications; Active Metric thread rolling screws of property class 10.9 Building costs; Part 1: Active Building construction Building costs; Part 2: Withdrawn Classification of cost Building costs; Part 3: Withdrawn Ascertainment of cost
DIN
TITLE
STATUS
DIN REPLACEMENT
with rounded wings Preferred Numbers and Series of Preferred Numbers; DIN 323-1 Withdrawn Basic Values, Calculated Values, Rounded Values Preferred Numbers and Series of DIN 323-2 Active Preferred Numbers; Introduction 60 centre holes; types DIN 332-1 Active R, A, B, and C Center holes 60 with thread for DIN 332-2 shaft ends for Active rotating electrical machines Centre holes DIN 332-4 for rail Active vehicles axles Machine tools; 60 DIN 332-7 Active centre holes; dimensioning Centre holes 90, form S; DIN 332-8 dimensions, Active determination process Center Holes; Indications DIN 332-10 Withdrawn DIN ISO 6411 on Technical Drawings DIN 338 Parallel shank Active twist drills,
ISO 6411
DIN
STATUS
DIN REPLACEMENT
DIN 406-10
DIN 406-11
DIN 406-12
DIN 417
Slotted capstan Active screws Engineering drawing practice; dimensioning; Active concepts and general principles Engineering drawing practice; Active dimensioning; principles of application Engineering drawing practice; dimensioning; tolerancing of linear and Active angular dimensions (modified version of ISO 406:1987) Slotted set screws with Withdrawn DIN EN 27435 long dog point Slotted headless Withdrawn DIN EN ISO 2342 screws with chamfered end Hexagon nuts, Withdrawn DIN EN ISO 4034 Grade C Washers for use with Withdrawn DIN EN ISO 7092 cheese head screws Product grade Withdrawn DIN EN ISO 7092 A washers -
ISO 7435
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 433-2
DIN 439-2
DIN 462
with a hardness up to 250 HV designed for use with cheese head screws Product grade A washers with a hardness up to 300 HV Withdrawn DIN EN ISO 7092 designed for use with cheese head screws Slotted set screws with Withdrawn DIN EN 27436 cup point Hexagon thin DIN EN ISO 4035, DIN EN ISO Withdrawn nuts 4036, DIN EN ISO 8675 Unchamfered hexagon thin Withdrawn DIN EN ISO 4036 nuts - Product grade B Chamfered hexagon thin DIN EN ISO 4035, DIN EN ISO nuts - Product Withdrawn 8675 grades A and B Washers for use in timber Withdrawn DIN EN ISO 7094 constructions Eyebolts Active Graphical Representation Active in Systems of Coordinates Machine Tools; Internal Tab Washers for Slotted Round Nuts Active for Hook Spanner according to DIN 1804
ISO 7092
ISO 7436 ISO 4035, ISO 4036, ISO 8675 ISO 4036
ISO 7094
TITLE
STATUS
DIN REPLACEMENT
DIN 471
Knurled thumb screws, high Active type Knurled nuts, Active high type Knurled nuts, Active low type Circlips (retaining rings) for Active shafts; Normal type and heavy type Paper sizes Withdrawn DIN EN ISO 216 Trimmed Sizes of Paper - C Active Series
ISO 216
Square head DIN 479 bolts with Active short dog point
DIN 522
DIN 548
DIN 551
Metal washers; technical Withdrawn DIN EN ISO 4759-3 delivery conditions Round nuts with set pin Active holes in side Slotted set screws Withdrawn DIN EN 24766 with flat point Slotted set screws Withdrawn DIN EN 27434 with cone point M5 to Withdrawn DIN EN ISO 4034 M100x6
ISO 4766
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 558
DIN 580
hexagon nuts Product grade C Hexagon head Withdrawn DIN EN ISO 4018 screws Collar eyebolts Active for lifting purposes
ISO 4018
DIN 601
DIN 603
DIN 609
DIN 625-1
DIN 625-3
DIN 625-4
M5 to M52 hexagon head bolts; Withdrawn DIN EN ISO 4016 product grade C Mushroom head Active square neck bolts Hexagon fits bolts Active with long thread Rolling bearings; single row Active radial contact ball bearings Rolling bearings; double row Active radial contact ball bearings Rolling Active bearings; radial contact groove ball bearings
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 653
DIN 678-1
DIN 678-2
with flanged outer ring Knurled thumb Active screws, low type Envelopes - Part 1: Active Sizes Envelopes - Part 2: Envelopes for Processing Active in Enveloping Machines, Size C6 to C4
DIN 763
DIN 764-1
DIN 764-2
Tested, noncalibrated, Active long-link round steel chains Calibrated and tested round steel link chains for Active continuous conveyors; grade 2, pitch 3,5d Calibrated Active and tested round steel link chains for continuous conveyors;
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 766
DIN 799-1
grade 3, pitch 3,5d Calibrated and tested grade 3 Active round steel link chains Foundation Active Blocks
Standards DIN12 820Work - Part 1: 1 Principles Standardization - Part 2: Presentation of standards; DIN 820-2 examples for presentation of figures, tables and part lists Standardization DIN 820-3 - Pdfart 3: Concepts Standardization - Part 4: DIN 820-4 Working procedure Standardization - Part 11: Presentation of Standards concerning safety DIN 820-11 regulations which are VDESpecifications or VDEGuidelines DIN 820-12 Standardization - Part 12: Presentation of
Active
Active
Active
Active
Active
DIN
TITLE
standards concerning safety regulations Standardization - Part 13: Adoption of European documents of DIN 820-13 Active CEN, CENELEC and of ETSI; Concepts and presentation Standardization - Part 15: Implementation of ISO and IEC DIN 820-15 Active international documents; Concepts and presentation Standardization - Part 120: Guidelines for DIN 820the inclusion of Active 120 safety aspects in standards (ISO/IEC Guide 51:1999) Technical drawings; DIN 824 Active Folding to filing size Hand Operated Wrenches and DIN 899 Sockets; Withdrawn DIN ISO 1711-1 Technical Specifications
ISO 1711-1
DIN
TITLE
STATUS
DIN REPLACEMENT
parallel screw thread Hexagon-duty DIN 910 hexagon head Active screw plugs Hexagon DIN 911 Socket Screw Withdrawn DIN ISO 2936 Keys Hexagon socket head cap screws DIN EN ISO 4762, DIN 912 Withdrawn (modified DIN EN ISO 21269 version of ISO 4762) Hexagon socket set screws with DIN 913 Withdrawn DIN EN ISO 4026 flat point (ISO 4026 modified) Hexagon socket set screws with DIN 914 Withdrawn DIN EN ISO 4027 cone point (ISO 4029 modified) Hexagon socket set DIN 915 Withdrawn DIN EN ISO 4028 screws with full dog point Hexagon socket set screws with DIN 916 Withdrawn DIN EN ISO 4029 cup point (ISO 4029 modified) Fasteners; Terminology; DIN 918 Spelling of Active terms; Abbreviations Overview of European DIN 918-3 Active Standards for fasteners DIN 919-1 Technical Active Drawings;
ISO 2936
ISO 4026
ISO 4027
ISO 4028
ISO 4029
DIN
TITLE
STATUS
DIN REPLACEMENT
Wood Processing; Principles Slotted pan head screws DIN 921 Active with large head Slotted pan DIN 923 head screws Active with shoulder Hexagon weld DIN 929 Active nuts Fine thread pitch partially DIN 930 Withdrawn DIN 931-1, DIN 931-2 threaded screws M1,6 to M39 Hexagon Cap Screws Partially DIN 931-1 Withdrawn DIN EN ISO 4014 Threaded Product grades A and B M42 to M160x6 Hexagon Cap Screws DIN 931-2 Withdrawn DIN EN ISO 4014 Partially Threaded Product grade B M1,6 to M52 Hexagon Cap Screws Fully DIN 933 Threaded Withdrawn DIN EN ISO 4017 Product grades A and B Hexagon nuts with metric coarse and fine pitch DIN EN ISO 4032, DIN 934 Withdrawn thread DIN EN ISO 8673 Product classes A and B
ISO 4014
ISO 4014
ISO 4017
DIN
TITLE
STATUS
DIN REPLACEMENT
Hexagon slotted nuts and castle nuts with metric coarse and DIN 935-1 Active fine pitch thread Product grades A and B M42 to M160x6 DIN 935-2 hexagon head Active bolts; product grade B Hexagon slotted nuts with metric DIN 935-3 coarse pitch Active thread Product grade C M8 to M52 and M8x1 to M52x3 DIN 936 hexagon thin Withdrawn nuts; product grades A and B Hexagon thin DIN 937 Withdrawn castle nuts Studs with a length of DIN 938 engagement Active equal to about 1d Studs with a length of DIN 939 engagement Active equal to about 1,25 d DIN 946 Determination Withdrawn DIN EN ISO 16047 of coefficient of friction of bolt/nut assemblies under
ISO 16047
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 960
DIN 961
DIN 962
DIN 963
DIN 964
DIN 965
specified conditions M8x1 to M100x4 hexagon head bolts with fine DIN EN ISO 8765, Withdrawn pitch thread DIN EN ISO 8676 Product grades A and B M8x1 to M52x3 hexagon head bolts with fine Withdrawn DIN EN ISO 8676 pitch thread Product grades A and B Designation system for Active fasteners Slotted countersunk head screws (with countersunk Withdrawn DIN EN ISO 2009 heads as specified in ISO 20091972) Slotted raised countersunk Withdrawn DIN EN ISO 2010 oval head screws Cross recessed DIN EN ISO 7046-1, countersunk Withdrawn DIN EN ISO 7046-2 flat head screws Cross recessed raised Withdrawn DIN EN ISO 7047 countersunk head screws Hexagon nuts; Withdrawn DIN EN ISO 4032 Style 1; Metric coarse
ISO 8676
ISO 2009
ISO 2010
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 971-1
DIN 971-2
DIN 972
thread, Product grades A and B; ISO 4032 modified Style 1 hexagon nuts with metric fine pitch Withdrawn DIN EN ISO 8673 thread; property classes 6 and 8 Style 2 hexagon nuts with metric fine pitch Withdrawn DIN EN ISO 8674 thread; property classes 10 and 12 M5 to M39 hexagon nuts; style 1; product grade Withdrawn DIN EN ISO 4034 C (modified version of ISO 4034) Threaded rods Withdrawn Metric thread Active stud bolts Metric interferenceActive fit thread stud bolts Hexagon weld nuts with Withdrawn DIN EN ISO 21670 flange Hexagon thin Active slotted nuts and castle nuts with metric coarse and fine pitch thread Product grades A and
ISO 8673
ISO 8674
ISO 4034
ISO 21670
DIN
TITLE B All-metal prevailing torque type hexagon nuts Locknuts for use with rolling bearings Prevailing torque type hexagon nuts with nonmetallic insert Retaining rings with lugs for use on shafts (external circlips) Prevailing torque type hexagon thin nuts with nonmetallic insert Shim rings and supporting rings
STATUS
DIN REPLACEMENT
DIN 980
Withdrawn
DIN 981
Active
DIN 982
Withdrawn
DIN 983
Active
DIN 985
ISO 10511
DIN 988
Active
DIN Hot rolled IActive 1025-1 sections - Part 1: Narrow flange Isections, I-serie - Dimensions, masses, sectional
DIN
TITLE properties Hot rolled Ibeams - Part 2: Wide flange Ibeams, IPBserie; dimensions, masses, sectional properties Hot rolled Ibeams; wide flange I-beams, light pattern, IPBl-serie; dimensions, masses, sectional properties Hot rolled Ibeams; wide flange I-beams heavy pattern, IPBv-serie; dimensions, masses, sectional properties Hot rolled Ibeams; medium flange I-beams, IPE-serie; dimensions, masses, sectional properties Units - Part 1: Names and Symbols Units - Part 2: Submultiples and Multiples for General Use Units - Part 3: Conversions of Units No Longer To Be
STATUS
DIN REPLACEMENT
DIN 1025-2
Active
DIN 1025-3
Active
DIN 1025-4
Active
DIN 1025-5
Active
Active
Active Active
DIN
TITLE Used General Mathematical Active Symbols and Concepts Vectors, matrices, tensors; Active symbols and concepts Letter symbols for physical quantities - Part Active 1: Symbols for general use Letter symbols for physical quantities - Part 2: Symbols for Active use in meteorology and geophysics Letter symbols for physical quantities - Part 3: Symbols for Active use in electric power engineering Letter symbols for physical quantities - Part Active 5: Symbols for use in fluid mechanics Letter symbols for physical quantities - Part 9: Symbols for use in the field Active of static converters using semiconductor devices Letter symbols Active for physical quantities - Part
STATUS
DIN REPLACEMENT
DIN 1302
DIN 1303
DIN 1304-1
DIN 1304-2
DIN 1304-3
DIN 1304-5
DIN 1304-8
DIN 1304-9
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 1311-1
DIN 1311-2
DIN 1311-3
DIN 1311-4
9: Symbols for equivalent circuits of piezoelectric crystals (Mechanical) vibrations, oscillations and vibration Active systems - Part 1: Basic concepts, survey (Mechanical) vibrations, oscillations and vibration systems - Part 2: Active Linear vibration systems with single degree of freedom (Mechanical) vibrations, oscillations and vibration systems - Part 3: Linear timeActive invariant vibration systems with a finite number of degrees of freedom Vibration; Vibrating Active Continua, Waves Physical Quantities and Equation; Active Concepts, Methods of Writing Angle; Active Concepts, Units DIN 1324-1 Electromagnetic Field Active - Part 1. State
DIN
TITLE
STATUS Quantities
DIN REPLACEMENT
DIN 1325-1
DIN 1325-2
Electromagnetic Field - Part 2. Active Material Quantities Electromagnetic Field - Part 3. Active Electromagnetic Waves Vocabulary for value management, value analysis and functional Active analysis - Part 1: Value analysis and functional analysis Value Management, Value Analysis, Functional Active Analysis Vocabulary Part 2: Value Management Acoustics; Withdrawn Symbols Presentation of Active Numerical Data Writing and Typesetting of Active Formulae Time; Calendar, Withdrawn Numbering of Weeks, Date of Day, (Clock) Time Arrangement and Numbering in Texts; Active Clauses, Paragraphs, Enumerations Publications in Active Sciences,
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 1422-2
DIN 1422-3
DIN 1422-4
DIN 1440 DIN 1443 DIN 1444 DIN 1450 DIN 1451-1 DIN 1451-2
Technology, Economy and Administration; Presentation of Manuscripts and Typoscripts Publications in Sciences, Technology, Economy and Administration; Active Presentation of Clean Copies for Reprographic Use Publications in Sciences, Technology, Economy and Active Administration; Typographical Presentation Publications in Sciences, Technology, Economy and Administration; Active Presentation of Scientific and Technical Reports Medium type Withdrawn washers for pins Clevis pins Withdrawn without head Clevis pins with Withdrawn head Legibility of Typefaces Active General Lettering Linear-Antiqua Active without serifes General Typefaces Active lineal Linear-
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 1451-3
DIN 1451-4
DIN 1463-1
DIN 1463-2
DIN 1470 DIN 1471 DIN 1472 DIN 1473 DIN 1474
Antiqua; lettering for transportation Lettering Active Linear-Antiqua without serifes; lettering for printing Typefaces lineal LinearAntiqua; stenciled Active lettering for engraving and other processes Guidelines for the Establishment and Active Development of Thesauri; Monolingual Thesauri Guidelines for the Establishment and Active Development of Thesauri; Multilingual Thesauri Grooved Pins, Full Length Withdrawn Parallel-grooved with Pilot Grooved Pins, Full Length Withdrawn Taper-grooved Grooved Pins, Half Length Withdrawn Taper-grooved Grooved Pins, Full Length Withdrawn Parallel-grooved with Chamfer Grooved Pins, Withdrawn Half Length
DIN EN 8739
ISO 8739
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 1505-1
DIN 1505-2
DIN 1505-3
DIN 1511
Reversegrooved Grooved Pins, Third Length Withdrawn Centre-grooved Round Head Withdrawn Grooved Pins Countersunk Head Grooved Withdrawn Pins Spring-Type Straight Pins Withdrawn (Roll Pins) Heavy Type Bibliographic references to documents Part 1: Full Active References to Printed and Published Documents Bibliographic Active references to documents Part 2: Rules for Citing Bibliographic references to documents Part 3: Indexes Active of cited documents (bibliographies) Pattern Withdrawn Equipment for Foundries; Production and Quality Tools for Active moulding - Part 1: Ejector pins with cylindrical head Tools for Active moulding - Part 2: Shouldered
ISO 8752
DIN EN 12890
EN 12890
DIN
TITLE
STATUS
DIN REPLACEMENT
ejector pins Tools for Active moulding - Part DIN 3: Ejector pins 1530-3 with conical head DIN Hexagon domed Active 1587 cap nuts Soft Solders; Active Composition, DIN Technical 1707 Delivery Condition Aluminium and aluminium alloys DIN Unalloyed 1712 Withdrawn aluminium Part 1 ingots for remelting Specifications DIN Aluminium; 1712 Half-Finished Withdrawn Part 3 Products Strips, Plates DIN and Sheets of Withdrawn 1783 Aluminium and Wrought Seamless DIN Drawn Copper Withdrawn 1786 Tubes for Piping Systems Round Rod of DIN Aluminium Withdrawn 1798 (Highest Grade Aluminium) Slotted Round Active Nut for Hook DIN Spanner; ISO 1804 Metric Fine Thread DIN Hook wrenches Active 1810 DIN Round Nut with Active 1816 Set Pin Holes Inside; ISO Metric Fine
ISO 9453
DIN EN 576
EN 576
DIN EN 573-3
EN 573-3
DIN EN 485-4
EN 485-4
DIN EN 1057
EN 1057
DIN EN 754-3
EN 754-3
DIN
TITLE
STATUS
DIN 1912-1
DIN 1912-2
DIN 1912-4
DIN 1912-5
DIN 1960
DIN 1961
Thread Graphical Withdrawn Representation of Welded, Soldered and Brazed Joints Graphical Withdrawn Representation of Welded, Soldered and Brazed Joints Graphical Representation of Welded, Soldered and Brazed Joints; Active Concepts and Terms for Soldered and Brazed Joints and Seams Symbolic Representation on Drawings of Withdrawn Welded, Soldered and Brazed Joints Construction contract procedures (VOB) - Part A: General Active provisions relating to the award of construction contracts Construction contract procedures (VOB) - Part B: General Active conditions of contract relating to the execution of construction work
ISO 6947
DIN EN 22553
ISO 2553
DIN 2112
DIN 2127
DIN 2137-1
DIN 2137-2
DIN 2342-1
DIN 2391-1
DIN 2391-2
Alphanumeric office machines Alphanumeric keyboards, Withdrawn DIN 2137-1, DIN 2137-2 keyboard arrangement for manually operated typewriters Alphanumeric office machines; alphanumeric keyboards, keyboard Withdrawn DIN 2137-1, DIN 2137-2 arrangement for electromechanical operated typewriters Keyboards for data and text input - Part 1: Active German keyboard layout Keyboards for data and text input - Part 2: Active Additional requirements Vocabulary of terminology; Active basic concepts Seamless precision steel Canceled DIN EN 10305-1 EN 10305-1 tubes - Part 1: Dimensions Seamless precision steel tubes - Part 2: Canceled DIN EN 10305-1 EN 10305-1 Technical delivery conditions
DIN
TITLE
DIN 2448
DIN 2527
DIN 2860
DIN 2999-1
DIN 2999-2
DIN 2999-3
DIN 2999-4
Seamless Steel Pipes and Tubes Dimensions, Canceled DIN EN 10220 Conventional Masses per Unit Length Blank flanges - Nominal Withdrawn DIN EN 1092-1 pressure 6 to 100 Capillary Fittings; Withdrawn Bends 180 of Copper Pipe threads for tubes and fittings; parallel internal thread Withdrawn DIN EN 10226-1 and taper external thread; tread dimensions Whitworth Pipe Threads for Tubes and Fittings; Cylindrical Internal Thread and Withdrawn DIN EN 10226-3 Conical External Thread, Gauging System and Use of Gauges Whitworth Pipe Threads for Tubes and Withdrawn DIN EN 10226-3 Fittings; Gauge Dimensions Pipe threads Withdrawn DIN EN 10226-3 for tubes and fittings; sizes
EN 10220
EN 1092-1
EN 10226-1
EN 10226-3
EN 10226-3
EN 10226-3
DIN
TITLE
for taper screw limit plug gauges for parallel internal thread Whitworth Pipe Threads for Tubes and Fittings; Cylindrical DIN 2999-5 Screw Limit Withdrawn DIN EN 10226-3 Ring Gauges for Gauging Conical External Threads, Sizes Whitworth Pipe Threads for Tubes and DIN 2999-6 Fittings; Withdrawn DIN EN 10226-3 Conical Screw Check Plugs, Sizes
EN 10226-3
EN 10226-3
Active
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 4102-2
DIN 4102-3
DIN 4102-4
DIN 4102-5
Classification of building materials Requirements and testing Fire Behaviour of Building Materials and Building Components Active Part 2: Building Components; Definitions, Requirements and Tests Fire Behaviour of Building Materials and Building Components Part 3: Fire Walls Active and Non-loadbearing External Walls; Definitions, Requirements and Tests Fire behaviour of building materials and elements - Part 4: Overview and design of Active classified building materials, elements and components Fire Behaviour of Active Building Materials and Building Components Part 5: Fire Barriers, Barriers in Lift Wells and Glazings Resistant against
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 4102-6
DIN 4102-7
DIN 4102-8
DIN 4102-9
DIN 410211
Fire; Definitions, Requirements and Tests Fire Behaviour of Building Materials and Building Components Part 6: Active Ventilation Ducts; Definitions, Requirements and Tests Fire behaviour of building materials and elements - Part 7: Active Roofing Concepts, requirements and testing Fire behaviour of building materials and Active components Part 8: Small scale test furnace Fire behaviour of building materials and elements - Part 9: seals for cable Active penetrations; concepts, requirements and testing Fire behaviour of Active building materials and building components Part 10: pipe encasements, pipe bushings, service shafts and ducts, and
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 410212
DIN 410213
DIN 410214
barriers across inspection openings; terminology, requirements and testing Fire behaviour of building materials and elements - Part 12: Fire resistance of Active electric cable systems required to maintain circuit integrity Requirements and testing Fire behaviour of building materials and elements - Part Active 13: Fire resistant glazing; concepts, requirements and testing Fire behaviour of building materials and elements - Part 14: Determination of Active the burning behaviour of floor covering systems using a radiant heat source Fire behaviour of building materials and Active elements - Part 15: "Brandschacht" Fire behaviour of Active building materials and
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 410217
DIN 410218
DIN 410222
elements - Part 16: "Brandschacht" tests Fire behaviour of building materials and elements - Part 17: determination of melting point Active of mineral fibre insulating materials; concepts, requirements and testing Fire behaviour of building materials and components Part 18: fire Active barriers, verification of automatic closure (continuous performance test) Fire behaviour of building materials and building components Part 22: Active Application standard for DIN 4102-4 based on the design of partial safety factors Thermal protection and energy economy Active in buildings - Part 1: Quantities and units Thermal Active protection and energy economy
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 4108-3
DIN 4108-7
DIN 410810
in buildings - Part 2: Minimum requirements to thermal insulation Thermal protection and energy economy in buildings - Part 3: Protection against moisture Active subject to climate conditions; Requirements and directions for design and construction Thermal insulation and energy economy of buildings Part 7: Airtightness of Active building, requirements, recommendations and examples for planning and performance Thermal insulation and energy economy in buildings - Part 10: Applicationrelated Active requirements for thermal insulation materials Factory made products Structural vibration - Part 1: Prediction of Active vibration parameters Structural Active
DIN 4150-2
TITLE
STATUS
DIN REPLACEMENT
DIN 4150-3
DIN 4420-1
DIN 4512
DIN 4512-1
vibration - Part 2: Human exposure to vibration in buildings Structural vibration - Part 3: Effects of Active vibration on structures Service and working scaffolds - Part 1: Service scaffolds Active Performance requirements, general design, structural design Photographic sensitometry, determination of optical density: "Photographische Withdrawn Sensitometrie, Bestimmung der optischen Dichte" (1934-01, 195711, 1961-10) Photographic sensitometry, determination of the speed of black and white Withdrawn negative (200009) materials for pictorial photography (1971-04, 199305) Photographic sensitometry, determination of Withdrawn diffuse transmission density (1973-01) Photographic Withdrawn sensitometry; (200206) determination of
DIN 4512-1:1971-04, DIN 4512-3:1973-01, DIN 45124:1977-06, DIN 4512-5:197710, DIN 4512-6:1980-07
ISO 6
DIN 4512-7:1993-01, DIN 4512-8:1993-01, DIN 45129:1993-01 DIN ISO 2240:1998-06 ISO 2240
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 4512-5
DIN 4512-6
DIN 4512-7
DIN 4512-8
DIN 4512-9
DIN 451210
the speed of colour reversal films (1977-06, 1985-08) Photographic sensitometry; determination of Withdrawn the speed of DIN ISO 5800:1998-06 (200206) colour negative films (1977-10, 1990-11) Photographic sensitometry; sensitometric Withdrawn illuminants and light sources (1980-07) Photographic sensitometry, determination of optical density; Active concepts, symbols and notations (199301) Photographic sensitometry, determination of optical density; Active geometric conditions for transmission density (1993-01) Photographic sensitometry, determination of optical density; Active spectral conditions (199301) Photographic Active sensitometry, determination of optical density; geometric conditions for reflection density
ISO 5800
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN V 470110
DIN V 470112
DIN 4710
(1993-01) Energy efficiency of heating and ventilation systems in buildings - Part Active 10: Heating, domestic hot water supply, ventilation Energetic evaluation of heating and ventilation systems in Active existing buildings - Part 12: Heat generation and domestic hot water generation Statistics on German meteorological data for calculating the Active energy requirements for heating and air conditioning equipment
Rules for text Active presentation Physics of radiation in the field of optics and illuminating DIN 5031-1 engineering - Part Active 1: Quantities, symbols and units of radiation physics DIN 5031-2 Physics of Active
DIN
TITLE
radiation in the field of optics and illuminating engineering - Part 2: Evaluation of radiation by different detectors Physics of radiation in the field of optics and illuminating DIN 5031-3 engineering - Part Active 3: Quantities, symbols and units of illuminating engineering Physics of radiation in the field of optics DIN 5031-4 Active and illuminating engineering - Part 4: Efficiencies Physics of radiation in the field of optics DIN 5031-5 and illuminating Active engineering - Part 5: Definitions for temperatures Physics of radiation in the field of optics and illuminating DIN 5031-6 engineering - Part Active 6: Pupil intensity as a measure of retinal illumination Physics of radiation in the field of optics DIN 5031-7 and illuminating Active engineering - Part 7: Terms for wavebands DIN 5031-8 Physics of Active
DIN
TITLE
radiation in the field of optics and illuminating engineering - Part 8: Definitions and constants of radiation physics Physics of radiation in the field of optics and illuminating DIN 5031-9 Active engineering - Part 9: Definitions in the field of luminescence Physics of radiation in the field of optics and illuminating engineering - Part DIN 5031- 10: Active 10 Photobiologically effective radiation, quantities, symbols and actions Artificial lighting - Part 3: Lighting DIN 5035-3 Active of health care premises Artificial lighting - Part 6: DIN 5035-6 Active Measurement and evaluation Artificial lighting - Part 7: Lighting DIN 5035-7 of interiors with Active visual displays work stations Artificial lighting - Part 8: Workplace DIN 5035-8 luminaries Active Requirements, recommendations and proofing
DIN
TITLE
Plane irons for DIN 5145 wood smooth and Active for planes Curved irons for DIN 5146 Active jack planes Lockwashers and locking plates for DIN 5406 Active use with rolling bearings Splined joints, calculation of DIN 5466-1 load capacity - Active Part 1: general basis Logic and set DIN 5473 theory; symbols Active and concepts Signs in DIN 5474 mathematical Withdrawn DIN 5473 logic Complex DIN 5475-1 quantities; Withdrawn DIN 5483-3 nomenclature Time-dependent quantities - Part DIN 5483-1 Active 1: Terms for the time-dependency Time-dependent DIN 5483-2 quantities - Part Active 2: Letter symbols Time-dependent quantities - Part 3: Complex DIN 5483-3 representation of Active sinusoidal timedependent quantities Notation of DIN 5486 Withdrawn DIN 1303 matrices Fourier-, Laplace- and ZDIN 5487 transformation; Active symbols and concepts DIN 5489 Directions and Withdrawn DIN EN 60375 signs in electrical engineering; rules
EN 60375
DIN
TITLE
for electric and magnetic circuits, equivalent circuit diagrams Logarithmic quantities and units - Part 2: DIN 5493-2 Logarithmic Active ratios, levels in nepers and decibels
DIN 6325
DIN 6340
DIN 6738
Spherical washers and Active conical seats Parallel Pins, Hardened; Withdrawn DIN EN ISO 8734 Tolerance Zone m6 Washers for clamping Active devices Paper and paper board Active - Lifespan classes Technical drawings, Withdrawn DIN EN ISO 3098 labeling Toothed lock Withdrawn washers Serrated lock Withdrawn washers Lock washers (retaining Active washers) for shafts Bright Key Active Steel;
ISO 8734
ISO 3098
DIN
TITLE
DIN 68851
DIN 68852
DIN 68853
DIN 6900
Dimensions, Permissible Variations, Weights Drive Type Fastenings without Taper Action Part 1: Active Parallel Keys, Keyways, Deep Pattern Drive Type Fastenings without Taper Action Part 2: Parallel Keys, Active Keyways, Deep Pattern for Machine Tools, Dimensions and Application Drive Type Fastenings without Taper Action Part 3: Parallel Active Keys, Shallow Pattern, Dimensions and Application Screw and Washer Withdrawn DIN EN 10644 Assemblies
EN 10644
TITLE Tapping screw and washer assemblies Plain washers for screw and washer assemblies Plain washers for tapping screw and washer assemblies Hexagon socket thin head cap screws with pilot recess Highstrength hexagon head bolts with large widths across flats for structural steel bolting Round washers for highstrength structural steel bolting Hexagon flange bolts Hexagon flange bolts with reduced shank Hexagon nuts with flange Prevailing
DIN 6902
EN 10673
DIN 6903
EN 10669
DIN 6912
Active
DIN 6914
EN 14399-4
DIN 6916
Withdrawn
DIN 6921
EN 1665
DIN 6922
EN 1665
DIN
TITLE
torque type hexagon nuts with DIN EN ISO 10512 nonmetallic insert Prevailing torque type DIN EN ISO 7042, DIN 6925 all-metal Withdrawn DIN EN ISO 10513 hexagon nuts Prevailing torque type hexagon nuts with DIN EN 1663, DIN EN DIN 6926 Withdrawn flange and 1666 with nonmetallic insert Prevailing torque type DIN EN 1664, DIN EN DIN 6927 all-metal Withdrawn 1667 nuts with flange
Pan head screws with type H or DIN type Z cross Active 7045 recess product grade A DIN Saw blades Active 7245 for web saws DIN EN ISO 14589, DIN EN ISO 15977, DIN EN ISO 15978, DIN EN ISO 15979, DIN EN ISO 15980, DIN EN ISO 15981, DIN EN ISO 15982, DIN EN ISO 15983, DIN EN ISO 15984, DIN EN ISO 16582, DIN EN ISO 16583, DIN EN ISO 16584 DIN EN ISO 8750 ISO 14589, ISO 15977, ISO 15978, ISO 15979, ISO 15980, ISO 15981, ISO 15982, ISO 15983, ISO 15984, ISO 16582, ISO 16583, ISO 16584 ISO 8750
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 7349
DIN 75001
DIN 75002
DIN 7504
DIN 7513
Normal Type Spiral Pins; Heavy Duty Withdrawn DIN EN ISO 8748 ISO 8748 Type Spring-Type Straight Pins; (Roll Withdrawn DIN EN ISO 13337 ISO 13337 Pins) Lightweight Type Plain Washers for Bolts with Active Heavy Clamping Sleeves Thread rolling screws for metric ISO Withdrawn ISO 7085 thread - Part 1: Types, designation, requirements Thread rolling screws for ISO metric thread; Active guideline values for hole diameters Self-drilling Withdrawn DIN screws with EN ISO 10666, tapping DIN EN ISO screw thread 15480, DIN EN ISO 10666, ISO 15480, ISO ISO 15481, DIN 15481, ISO 15482, ISO 15483 Dimensions, EN ISO 15482, requirements DIN EN ISO and testing 15483 Hexagon Active head and slotted head thread cutting screws -
DIN
TITLE
STATUS
DIN REPLACEMENT
DIN 7516
DIN 7876
DIN 7877
DIN 7962
DIN 7970
Dimensions, requirements and testing Cross recessed head thread cutting Active screws Dimensions, requirements and testing Ring seals Active and gaskets Diving Withdrawn accessories for skin divers; terminology Diving accessories for skin divers; Withdrawn flippers. dimensions. requirements and testing) Diving accessories for skin divers; Withdrawn diver"s masks. requirements and testing Cross recesses for screws; Withdrawn (modified version of ISO 4757) Threads and thread ends for tapping screws Withdrawn (modified version of ISO 1478)
ISO 4757
ISO 1478
DIN
TITLE
STATUS
Slotted pan DIN head tapping Withdrawn 7971 screws Slotted DIN countersunk Withdrawn 7972 head tapping screws Slotted raised DIN countersunk Withdrawn 7973 head tapping screws Taper Pins with Thread DIN Ends and Withdrawn 7977 Constant Point Lengths Taper Pins DIN with Internal Withdrawn 7978 Thread Parallel Pins DIN with Internal Withdrawn 7979 Thread Spring lock washers with DIN square ends Withdrawn 7980 for cheese head screws Cross DIN recessed pan Withdrawn 7981 head tapping screws Cross recessed DIN countersunk Withdrawn 7982 head tapping screws Countersunk (Flat) Head DIN Tapping Withdrawn 7983 Screws with Cross Recess Hexagon DIN socket thin Active 7984 head cap screws
ISO 1482
ISO 1483
DIN EN 28737
ISO 8737
ISO 7049
ISO 7050
ISO 7051
DIN
TITLE
STATUS
Cross DIN recessed Withdrawn 7985 raised cheese head screws Hexagon socket DIN countersunk Withdrawn 7991 head cap screws
ISO 10642
Polyethylene DIN 8074 (PE) pipes Active Dimensions Polyethylene (PE) pipes PE 63, PE 80, PE 100, PEDIN 8075 Active HD - General quality requirements, testing Brazing and Braze Weld Filler Metals; Copper Base Brazing DIN 8513-1 Withdrawn DIN EN 1044 Alloys; Composition, Use, Technical Conditions of Delivery Brazing and Braze Weld Filler Metals; Silver-bearing Brazing Alloys with DIN 8513-2 Withdrawn DIN EN 1044 less than 20% by wt. Silver; Composition, Use, Technical Conditions of Delivery
EN 1044
EN 1044
DIN
TITLE
DIN 8513-3
DIN 8513-4
DIN 8513-5
DIN 8580
DIN 8806-1
Brazing filler metals; silver brazing filler metals containing not less than 20% Withdrawn DIN EN 1044 of silver; composition, application, technical delivery conditions Brazing and Braze Weld Filler Metals; AluminiumBase Brazing Withdrawn DIN EN 1044 Alloys; Composition, Use, Technical Conditions of Delivery Brazing filler metals; Nickel base filler metals for high temperature brazing; Withdrawn DIN EN 1044 Application, composition, technical delivery conditions Manufacturing processes Terms and Active definitions, division Narrow band saw blades for Active woodworking; dimensions
EN 1044
EN 1044
EN 1044
DIN
TITLE STATUS
DIN REPLACEMENT
DIN 9021
Plain washers with DIN EN ISO 7093-1, DIN EN Withdrawn large ISO 7093-2 outside diameter
DIN 10504
Tubes for the food, chemical and pharmaceutical DIN 11850 industry Active Stainless steel tubes Dimensions, materials
DIN 12950- Laboratory Withdrawn 1 furniture; safety cabinets for microbiological and
DIN
TITLE
DIN 129502
DIN 1295010
DIN 129751
DIN 129752
DIN 129761
DIN 12976-
biotechnological work; safety requirements, tests Laboratory furniture; safety cabinets for microbiological and biotechnological Withdrawn work; containment of class 1 and class 2 cabinets, microbiological test Laboratory furniture; safety cabinets for microbiological and biotechnological Withdrawn and biotechnological work; requirements and testing Thermal solar systems and components Solar collectors - Part 1: General requirements Thermal solar systems and components Solar collectors - Part 2: Test methods Thermal solar systems and components Factory made systems - Part 1: General requirements Thermal solar
DIN
TITLE systems and components Factory made systems - Part 2: Test methods
Division of hospitals into functional DIN 13080 Active areas and functional sections Supply systems for medical gases - Part 2: Dimensions and allocation of probes and DIN 13260-2 gas-specific Active connection points for terminal units for compressed medical gases and vacuum Packaging Requirements for packaging recoverable through composting and DIN 13432 Active biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging DIN 13715 Workpiece Active cornes and
DIN EN 13432
DIN
TITLE edges
Areas for the DIN 14090 fire brigade on premises Fire precaution regulation Part 1: General and DIN 14096-1 part A (placard); rules for drafting and placarding Fire precaution regulation Part 2: Part B (for persons without DIN 14096-2 special tasks of fire prevention and fire fighting); rules for drafting Fire precaution regulation Part 3: Part C (for persons with special DIN 14096-3 tasks of fire prevention and fire fighting); rules for drafting Water pool DIN 14210 for firefighting
Active
Active
Active
Active
DIN
TITLE
STATUS Active
DIN REPLACEMENT
Portable fire extinguishers DIN 14406-4 - Part 4: Maintenance Trailers for firefighting purposes, DIN 14503 two-wheeled; general requirements Firefighting and rescue service vehicles DIN 14505 Vehicles for roller containers General requirements Rescue service vehicles Vehicles for DIN 14507 roller containers General requirements Trailers for DIN 14520 portable fire pumps Firefighting Trailer with DIN 14521 removable foam-water monitor Fire fighting vehicles Part 5: Group pumping appliance LF DIN 14530-5 10/6, Group pumping appliance for rescue operations HLF 10/6 DIN 14530- Fire fighting
Active
Active
Withdrawn
Active
Active
Active
DIN
TITLE vehicles Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16 Fire fighting vehicles Part 16: Pumping appliance TSF Fire fighting vehicles Part 17: Pumping appliance TSF-W Fire fighting vehicles Part 21: Pump water tanker TLF 20/40, Pump water tanker TLF 20/40SL Fire fighting vehicles Part 22: TLF 16/24-TR Fire fighting vehicles Part 24: Small pumping appliance KLF Fire fighting vehicles Part 25: Pumping
STATUS
DIN REPLACEMENT
11
DIN 1453016
Active
DIN 1453017
Active
DIN 1453021
Active
DIN 1453022
Active
DIN 1453024
Active
DIN 1453025
Active
DIN
TITLE
STATUS
DIN REPLACEMENT
appliance STLF 10/6 Vehicles carrying tools and gears DIN 14555-1 Active Part 1: General requirements Vehicles carrying tools and gears DIN 14555-3 Active Part 3: Emergency tender RW Vehicles carrying tools and gears DIN 14555Part 12: Active 12 Damage control tender GW-G Vehicles carrying tools DIN 14555- and gears Active 21 Part 21: GWL1 for logistic tasks Vehicles carrying tools DIN 14555- and gears Active 22 Part 22: GWL2 for logistic tasks Fire hose DIN 14565 tender; Type Withdrawn SW 2000-TR Turntable ladders and similar fire fighting vehicles; DIN 14701-1 Withdrawn DIN EN 1777 Purpose, concepts, safety equipment, requirements DIN 14701-2 Turntable Withdrawn DIN EN 14043, DIN EN
EN 1777
EN 14043, EN 14044
DIN
TITLE
STATUS
DIN REPLACEMENT
ladders and similar fire fighting vehicles; 14044 Turn table ladders, engine driven Turntable ladders and similar fire DIN 14701-3 fighting Withdrawn DIN EN 1777 vehicles; Rescue baskets Turntable ladder DL DIN 14702 Active 16-4, hand operating Trailer DIN 14703 Ladder AL Active 16-4 Hook ladder, manufactured DIN 14710-1 using wood; Withdrawn DIN EN 1147 with hinged hook Hook light DIN 14710-3 Withdrawn metal ladder Scaling DIN 14711-1 ladder; made Withdrawn DIN EN 1147 from wood Scaling ladder; made DIN 14711-2 Withdrawn DIN EN 1147 from light metal Scaling ladder; socket DIN 14711-3 Withdrawn DIN EN 1147 rungs and socket parts Folding DIN 14713 Withdrawn DIN EN 1147 ladder Three piece extension DIN 14715-1 Withdrawn DIN EN 1147 ladder made from wood DIN 14715-2 Three piece Withdrawn DIN EN 1147 extension
EN 1777
EN 1147
EN 1147
EN 1147
DIN
STATUS
DIN REPLACEMENT
Cranes; steel structures; DIN 15018principles of Active 2 design and construction Warehouse systems with guided industrial DIN 15185- trucks; Active 1 requirements on the ground, the warehouse and other requirements Warehousesystems with powered industrials trucks; code of practice for the protection DIN 15185of persons when Active 2 operating with trucks in narrow aisles; safety requirements, testing Film 70 mm; DIN 15721 Active projection reel
Classification Active of types Cross-linked Active high-density polyethylene (PE-X) pipes - General quality requirements
DIN
TITLE
DIN 16893
DIN 17175
DIN 17410
Seamless Tubes of heat Withdraw DIN EN 10216-2 Resistant Steels Materials for permanent Active magnets: Technical conditions Withdraw DIN EN 10217-7 Withdraw DIN EN 10216-5 Resistance Active alloys
DIN 18012
DIN 18013
DIN 18014
House service connections Active facilities Principles for planning Recesses for meter boards Active (electric meters) Foundation earth electrode Active General planning criteria
DIN
TITLE
Electrical installations in residential DIN 18015-1 buildings - Active Part 1: Planning principles Electrical installations in residential buildings DIN 18015-2 Active Part 2: Nature and extent of minimum equipment Electrical installations in residential buildings DIN 18015-3 Part 3: Active Wiring and disposition of electrical equipment Domestic kitchens, bathrooms DIN 18022 Withdrawn and WCs; design principles Barrier-free built environment - Part 1: Streets, squares, DIN 18024-1 paths, public Active transport, recreation areas and playgrounds Design principles DIN 18024-2 Construction Active of accessible buildings Part 2:
DIN
TITLE
DIN 18065
DIN 18379
DIN 18382
DIN 18384
Publicly accessible buildings and workplaces, design principles Stairs in buildings Terminology, Active measuring rules, main dimensions Construction contract procedures (VOB) - Part C: General technical specifications in Active construction contracts (ATV) Installation of air conditioning systems Contract procedures for building works - Part C: General technical specifications for building works; LowActive voltage installation and mediumvoltage installation with nominal voltages up to including 36 kV Construction Active contract procedures
DIN
TITLE
(VOB) - Part C: General technical specifications in construction contracts (ATV); Installation of lightning protection systems Steel structures DIN EN 1993 DIN 18800-1 Part 1: Withdrawn DIN EN 1090 Design and construction Steel structures Part 2: Analysis of DIN 18800-2 safety against Withdrawn DIN EN 1993 buckling of linear members and frames Steel structures Part 3: DIN 18800-3 Analysis of Withdrawn DIN EN 1993 safety against buckling of plates Steel structures Part 4: DIN 18800-4 Analysis of Withdrawn DIN EN 1993 safety against buckling of shells DIN 18800-5 Steel Withdrawn DIN EN 1994 structures Part 5: Composite structures of steel and concrete -
DIN
TITLE
Design and construction Steel structures Part 7: DIN 18800-7 Execution Active and constructor's qualification
EN 1090-2
Control technology Terminology Measurement and control; terminology DIN 19225 and classification of controllers Control technology Part 1: DIN 19226-1 General terms and definitions Control technology Part 2: Terms and DIN 19226-2 definitions; dynamic systems behaviour Control technology Part 3: Terms and DIN 19226-3 definitions of switching systems behaviour DIN 19226-4 Control technology -
Active
Active
Active
Active
Active
DIN
TITLE
Part 4: Terms and definitions of control systems Control technology DIN 19226-5 Part 5: Functional terms Control technology Part 6: Terms and DIN 19226-6 definitions of functional and constructional units Control technology; graphical symbols and identifying letters for DIN 19227-1 process control engineering; symbolic representation for functions Control technology; graphical symbols and identifying DIN 19227-2 letters for process control engineering; representation of details Measurement and control; DIN 19237 control engineering vocabulary DIN 19227-1 Control
Active
Active
Active
Active
DIN 19226-3, DIN 192264, Withdrawn DIN 19226-5, DIN 192266 Active
DIN
TITLE
technology; graphical symbols and identifying letters for process control engineering; symbolic representation for functions Control technology; graphical symbols and identifying DIN 19227-2 letters for Active process control engineering; representation of details Pipe-lines of high-density PE (highdensity polyethylene) and lowDIN EN 12201-1, density PE DIN EN 12201-2, DIN 19533 (low density Withdrawn DIN EN 12201-3, polyethylene) DIN EN 12201-5 for drinking water supply; pipes, pipe connections and fittings for pipe-lines Hydraulic steel structures DIN 19704-1 Active Part 1: Criteria for design and calculation DIN 19704-2 Hydraulic Active steel structures Part 2: Design and
DIN
TITLE
manufacturing Hydraulic steel structures DIN 19704-3 Active Part 3: Electrical equipment
DIN 20066
DIN 21908
DIN 22101
DIN 22107
DIN 22112
DIN
TITLE the mining industry men's vest with 1/4 sleeves Clothing for the mining industry men's underpants 1/1 length (Long Johns)
DIN 23345
Ventilation and air conditioning - folded and DIN 24190 Withdrawn welded rectangular sheet metal ducts Hydraulic valves; mounting surfaces and DIN 24340-2 connecting Active plates for directional control valves
DIN 28610-1 Ductile iron pressure pipes with socket with cementmortar lining for
DIN
TITLE
STATUS
DIN REPLACEMENT
gas and water pipelines; dimensions and masses Ductile iron pressure pipes with socket for gas and water pipelines DIN 28610-2 Withdrawn DIN EN 969 rated for pressures over 4 bar up to and including 16 bar; dimensions and masses
EN 969
DIN
TITLE STATUS
DIN REPLACEMENT
roller containers - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel Roller contact tipper vehicles, roller containers - Part 3: Roller DIN 30722-3 contact Active tipper vehicles up to 12 t, roller containers type 900 made from steel Roller containers for the DIN 30722-4 Active transport on road and rail
TITLE
STATUS
DIN REPLACEMENT
Frequency and wave Active bands Guidelines for the user interface in multimedia DIN 40020 equipment for Active general purpose use (IEC/TR 61997:2001) Road vehicles; degrees of protection (IP-code); protection DIN against foreign Active 40050-9 objects; water and contact; electrical equipment DIN Graphical symbols Withdrawn 40101-1 for use on equipment Graphical symbols for use on DIN equipment; graphical Active 40101-2 symbols from ISO 7000 for electrical engineering Electric power technology - Current DIN 40108 systems - Concepts, Active quantities, letter symbols Quantities used in DIN alternating current Active 40110-1 theory - Part 2: Twoline circuits Quantities used in DIN alternating current Active 40110-2 theory - Part 2: Multi-line circuits Telecommunications DIN - Part 1: Basic Active 40146-1 concepts Transmission DIN systems and twoActive 40148-1 ports; concepts and quantities DIN Transmission Active 40148-2 systems and twoports; symmetry
DIN
TITLE
STATUS
DIN REPLACEMENT
characteristics of linear two-ports Transmission DIN systems and twoActive 40148-3 ports; measures for attenuation Nominal value, limiting value, rated DIN 40200 Active value, rating concepts Electrical communication DIN 41215 engineering; Withdrawn electromagnetic relays, definitions Electro Sheets; DIN 41301 Magnetic Materials Withdrawn for Transformers Small transformers and chokes; stripDIN wound cut cores; Withdrawn 41309-1 types SM, SE, SU, SG and S3U; dimensions materials Small transformers and chokes; stripwound cut cores; DIN technical conditions Withdrawn 41309-2 of delivery for one phase applications; types SM, SE, SU and SG Small transformers and chokes; stripwound cut cores; DIN technical conditions Withdrawn 41309-3 of delivery for three phase applications; type S3U Nominal values of DIN 41426 resistors and Withdrawn DIN IEC 60063 capacitors Colour code for DIN 41429 Withdrawn DIN EN 60062 fixed resistors DIN 41524 Circular connectors Withdrawn for radio and associated sound
DIN
TITLE
STATUS
DIN REPLACEMENT
equipment three and five-pole connectors Two-part connectors for printed board, DIN grid 2,54 mm; Withdrawn DIN 41612-1 S1 41612-1 common mounting features; survey of types Two piece connectors for DIN printed circuits, grid Withdrawn DIN EN 60603-2 41612-1 S1 2,54 mm (0,1 in); general allusions Two-part connectors for printed boards; DIN grid 2,54mm; Withdrawn DIN EN 60603-2 41612-2 dimensions of types B, C and D Two part connectors for printed boards; DIN grid 2,54mm; Withdrawn DIN EN 60603-2 41612-3 dimensions of types F and G Two-part connectors for printed boards; DIN grid 2,54mm, Withdrawn DIN EN 60603-2 41612-4 dimensions of type H Two-part connectors for printed boards; DIN grid 2,54mm; Withdrawn DIN EN 60603-2 41612-5 ratings, requirements, tests Two-part connection for printed boards; DIN grid 2.54mm; Withdrawn DIN EN 60603-2 41612-6 dimensions of types Q, R and S Two-part connectors for printed boards; DIN grid 2,54 mm; Withdrawn DIN EN 60603-2 41612-7 dimensions of types U and V DIN Two-part connectors Withdrawn DIN EN 60603-2 41612-8 for printed boards; grid 2.54 mm; dimensions of type
EN 60603-2
EN 60603-2
EN 60603-2
EN 60603-2
EN 60603-2
EN 60603-2
EN 60603-2 EN 60603-2
DIN
TITLE
STATUS
DIN REPLACEMENT
M Two-part connectors for printed boards; grid 2.54 mm; DIN dimensions of type Withdrawn DIN EN 60603-2 41612-8 S1 M; survey of special contracts for use with type M Two-part connectors DIN for printed boards; Withdrawn DIN EN 60603-2 41612-9 grid 2,54 mm; dimensions of type E Two-part connectors DIN for printed boards; Withdrawn DIN EN 60603-2 41612-10 grid 2,54mm; gauges Two-part connectors DIN for printed boards; Withdrawn DIN 41612-9 41612-102 dimensions for type X Two-part connectors DIN for printed boards; Withdrawn DIN 41612-8 41612-103 dimensions of type M Rack and panel connectors, trapezoidal, round DIN contacts 1 mm; Active 41652-1 common mounting features and dimensions; survey of types Rack and panel connectors; DIN trapezoidal, round Active 41652-2 contacts 1 mm; ratings, requirements, tests Rack and panel connectors, trapezoidal, round DIN contacts 1 mm; Active 41750-1 common mounting features and dimensions; survey of types DIN Rack and panel Active 41750-2 connectors,
EN 60603-2
EN 60603-2
EN 60603-2
DIN
TITLE
STATUS
DIN REPLACEMENT
trapezoidal, round contacts 1 mm; ratings, requirements, tests Rack and panel connectors, trapezoidal, round DIN contacts 1 mm; Active 41750-3 dimensions of type A; solder termination for free wiring Rack and panel connectors, trapezoidal, round DIN contacts 1 mm; Active 41750-5 dimensions of type C; crimp termination for free wiring Guidelines for the DIN 41782 presentation of Withdrawn DIN IEC 60747-2 published data Thyristors, DIN 41786 Withdrawn definitions Semiconductor devices and DIN 41855 integrated circuits; Withdrawn kinds of devices and general terms Semiconductor devices and integrated circuits; DIN optoelectronic Withdrawn 41855-2 semiconductor devices; terms and definitions Cases 10 A 3 and 10 B 3 for DIN 41868 semiconductor Withdrawn devices; main dimensions Case 23 A 3 for DIN semiconductor Withdrawn 41869-1 devices; main dimensions DIN Cases 34 A 2 and 34 Withdrawn 41869-2 A 3 for
IEC 60747-2
DIN
TITLE
STATUS
DIN REPLACEMENT
semiconductor devices; main dimensions Case 11 A 3 and 11 B 3 for DIN semiconductor Withdrawn 41869-3 devices; main dimensions Case 12 A 3 for DIN semiconductor Withdrawn 41869-4 devices; main dimensions Case 13 A 3 for DIN semiconductor Withdrawn 41869-5 devices; main dimensions Case 14 A 3 for DIN semiconductor Withdrawn 41869-6 devices; main dimensions Case type 15 for DIN semiconductor Withdrawn 41869-7 devices; main dimensions Cases type 5 for semiconductor DIN 41873 Withdrawn devices and integrated circuits Cases 18 A, B and C with 2 up to 4 terminals for DIN 41876 Withdrawn semiconductor devices; main dimensions Terminal markings for electrical DIN 42400 equipment; general Withdrawn DIN EN 60445 rules, alphanumeric system Terminal markings for power DIN 42402 Active transformers and reactors Terminal markings DIN 42403 Withdrawn DIN IEC 61148 for power converters DIN Totally enclosed fan- Withdrawn 42673-1 cooled three-phase
EN 60445
IEC 61148
DIN
TITLE
STATUS
DIN REPLACEMENT
induction motors squirrel-cage, type IM B 3, with rolling bearing; mounting dimensions and relationship frame sizes-output ratings Totally enclosed fancooled three-phase induction motors with squirrel-cage, type IM B 3, with DIN rolling bearings; Active 42673-2 relationship frame sizes - output ratings for type of protection increased safety "e" Totally enclosed fancooled three-phase induction motors with squirrel-cage, type IM B 3, with DIN rolling bearings; Active 42673-3 relationship frame sizes - output ratings for type of protection flameproof enclosure "d" Totally-enclosed fan-cooled alternating-current DIN polyphase motors Active 42673-4 with squirrel-cage, design B3, with ball bearings, maximum envelope dimensions Rating plates for DIN 42961 rotating electrical Active machinery; design Rated output values for rotating electrical DIN 42973 Active machinery for continuous duty DIN 43700 Measurement and Withdrawn DIN IEC 61554 control -
IEC 61554
DIN
TITLE
STATUS
DIN REPLACEMENT
Measurement and control instruments for panel mounting Nominal front- and cut-out-dimensions Electrical measuring instruments; direct acting indicating DIN 43780 Withdrawn DIN EN 60051-1 electrical measuring instruments and their accessories Line scales and pointers for DIN indicating electrical Active 43802-2 measuring instruments; general requirements Line scales and pointers for DIN indicating electrical Active 43802-3 measuring instruments; designs and dimensions Line scales and pointers for indicating electrical DIN measuring Active 43802-4 instruments; scale graduation and numbering Measuring and control; electrical measuring instruments; terminal markings for switchboard DIN 43807 Active meters, panel meters and measuring transducers for the measurement of power and power factor DIN 43856 Electricity meters, Active tariff time switches and ripple control receivers; connection
EN 60051-1
DIN
TITLE
STATUS
DIN REPLACEMENT
diagrams, terminal marking, circuit diagrams Electricity meters Part 2: Marking of DIN auxiliary terminals 43856-2 for tariff devices according to IECReport 61354:1995 Meter mounting DIN boards; dimensions 43870-1 based on a grid system Meter mounting DIN boards; functional 43870-2 area DIN Meter panels; 43870-3 wirings Meter mounting DIN boards; dimensions 44070-1 based on a grid system Meter mounting DIN boards; functional 44070-2 area DIN Meter panels; 44070-3 wirings DIN Meter panels; cover 44070-4 for wiring Thermistors; PTC, DIN 44080 technical terms and tests Information DIN 44300 processing; vocabulary Information DIN processing 44300-1 Concepts - General terms Information processing DIN Concepts 44300-2 Representation of data DIN Information 44300-3 processing Concepts - Data
Active
Active
Withdrawn
Withdrawn Withdrawn
DIN
TITLE
STATUS
DIN REPLACEMENT
structures Information DIN processing Withdrawn 44300-4 Concepts Programming Information processing DIN Concepts Withdrawn 44300-5 Components of digital computer systems Information DIN processing Withdrawn 44300-6 Concepts Storage Information DIN processing Withdrawn 44300-7 Concepts Times Information DIN processing Withdrawn 44300-8 Concepts Processing functions Information processing DIN Concepts - Process Withdrawn 44300-9 relations and modes of operation Circular connectors for radio and DIN 45322 associated sound Withdrawn DIN EN 60130-9 equipment; six-pole connectors Connectors for coupling an external low-voltage power to portable DIN 45323 entertainment Active equipment (describes at least two DC coaxial power plugs) High fidelity audio equipment and DIN systems; minimum Withdrawn DIN EN 61305-1 45500-1 performance requirements; Part 1: general DIN High fidelity audio Withdrawn DIN EN 61305-2
EN 60130-9
EN 61305-1
EN 61305-2
DIN
TITLE
STATUS
DIN REPLACEMENT
equipment and systems; 45500-2 requirements for tuner equipments High fidelity audio equipment and systems; DIN requirements for Withdrawn 45500-3 disk record reproducing equipments High fidelity audio equipment and systems; minimum DIN performance Withdrawn 45500-4 requirements for magnetic recording and reproducing equipment High fidelity audio equipment and DIN systems; minimum Withdrawn 45500-5 performance requirements for microphones High fidelity audio equipment and DIN systems; minimum Withdrawn DIN EN 61305-3 45500-6 performance requirements for amplifiers High fidelity audio equipment and DIN systems; Withdrawn DIN EN 61305-5 45500-7 requirements for loudspeakers High fidelity audio DIN equipment and Withdrawn 45500-8 systems; for sets and systems High fidelity audio equipment and DIN systems; minimum Withdrawn 45500-10 performance requirements for headphones DIN 45507 Measuring apparatus Withdrawn DIN IEC 60386
EN 61305-3
EN 61305-5
IEC 60386
DIN
TITLE
STATUS
DIN REPLACEMENT
for frequency variations in sound recording equipment Disk record reproducing equipment; directives for measurements, markings and audio DIN 45539 frequency connections, dimensions of interchangeable pickups, requirements of play back amplifiers Microphones; DIN 45596 phantom powering Steel flats with special magnetic properties cold rolled, non DIN oriented, finally 46400-1 annealed magnetic sheet and strip hysteresis loss at frequencies above 100 Hz Grain-oriented DIN magnetic steel and 46400-3 strip technical conditions Cords for telecommunication; DIN 47100 code of insulated conductors, colour of sheath DIN Terms of HF-lines 47301-1 DIN Terms of HF-lines 47301-2 Definition of radio frequency DIN transmission lines 47301-3 mean characteristic impedance - mean standing wave ratio
IEC 60098
Withdrawn
EN 10106
EN 10107
Withdrawn
Active Active
Active
DIN
TITLE
STATUS
DIN REPLACEMENT
Lightning protection system; Arrangement of DIN 48803 Withdrawn components and dimensions for mounting Lightning protection DIN 48830 Withdrawn system; Description
DIN 51097
DIN 51130
EN 717-2
DIN
TITLE
emission by gas analysis Paints and varnishes Determination of the drying DIN 53150 stage of Active coatings (modified Bandow-Wolff method) Testing of combustible materials; DIN 53438 Active response to ignition by small flame Testing of DIN 53452 Plastics; Withdrawn DIN EN ISO 178 Flexural Test Flexible Cellular Polymeric DIN 53575 Materials Withdrawn DIN EN ISO 8067 Determination of Tear Strength Testing of combustible materials; DIN 54836 Active determination of ignition temperature Determination Active of burning DIN 54837 behaviour using a gas burner Machine tools; Withdrawn symbols; DIN 55003-3 numerically controlled machine tools DIN 58810 Surgical Withdrawn implants; threads for bone screws
ISO 178
ISO 8067
DIN
TITLE
DIN 58888
and nuts Thread connection for Withdrawn DIN ISO 8038-1 microscope objectives
ISO 8038-1
DIN 66000
DIN 66001
DIN 66002
DIN 66003
DIN 660041
DIN 660042
DIN
TITLE
DIN 660043
DIN 660044
DIN 660045
DIN 66005
8-bit coded character sets on punched cards Information processing Coding on data media - Part 3: Representation of Active 7-bit coded and 8-bit coded character sets on magnetic tape 12 Information processing Coding on data media - Part 4: Representation of Active 7-bit coded and 8-bit coded character sets on magnetic tape cassette 3,8 Information processing Coding on data media - Part 5: Representation of Active 7-bit coded and 8-bit coded set on media-flexible disk cartridge Information processing; representation of packed numerics Active and binary data recorded on 9 tracks on magnetic tape 12 Presentation of ALGOL/ALCOR programs on Withdrawn paper tape and punch cards Font CMC 7 for Withdrawn DIN ISO 1004 magnetic ink character
ISO 1004
DIN
TITLE
DIN 660081
DIN 660086
DIN 660087
DIN 66009
DIN 660201
DIN 660202
recognition; characters and nominal dimensions Font A for optical character recognition; Active characters and nominal dimensions Font A for optical character recognition; characters and Active nominal dimensions; extension of the character set Font A for optical character recognition; representation of Active characters by dots in a 9 9 matrix Font B for optical character Withdrawn recognition; character Functional requirements for the interface between data terminal equipment and Active data circuitterminating equipment - Part 1: General application List of definitions Active for interchange circuits between data terminal equipment (DTE) and data circuitterminating
DIN
TITLE
DIN 660204
DIN 660209
DIN 660211
DIN 660212
equipment (DCE) in public data networks Data transmission; interface between data circuitActive terminating equipment (DCE) and data terminal equipment (DTE) Interface between data terminal equipment (DTE) and data circuitterminating equipment (DCE) Active for synchronous transmission on group band circuits at 48000 bits per second Data transmission; interface between data circuitActive terminating equipment (DCE) and data terminal equipment (DTE) Interface between data terminal equipment (DTE) and data circuitterminating equipment (DCE) Active for synchronous transmission on group band circuits at 48000 bits per second Numerical control of machines, Active format; general requirements Industrial Active
DIN
TITLE
DIN 66027
DIN 662151
DIN 662152
DIN 662532
DIN 66234
DIN 66255
automation; numerical control of machines; format, preparatory and miscellaneous functions Information processing; programming Withdrawn language FORTRAN Programming of numerically controlled machines; Active CLDATA, general structure and record types Programming of numerically controlled machines; CLDATA; minor Active elements of type 2000 records (post-processor commands) Information processing; 1998 programming language PEARL Information processing; Active programming language PL/I Information processing; Active programming language PL/I Information processing; Withdrawn programming language Pascal Numerical Withdrawn DIN ISO 2806 control of machines;
ISO 2806
DIN
TITLE concepts Interfaces and basic data link control procedures for data communication; C S-interface, V S-interface Interface and basic data link control procedures for data communication; balanced interface for start-stop transmission using basic data link control procedures on point-to-point connection Information processing; NassiShneiderman flowchart symbols Industrial automation systems and integration Multiprocessor Control System for Industrial Machines (MPST) - Part 1: Parallel bus Multiprocessor control system for industrial machines (MPST); industrial automatics; rules
DIN 662581
Withdrawn
DIN 662582
Withdrawn
DIN 66261
Active
DIN 662641
Active
DIN 662642
Active
DIN
TITLE
DIN 66303
DIN V 66304
DIN 663252
DIN 663254
DIN 69901
for information interchange Information technology - 8 bit Active code Industrial automation; Computer Aided Design; format Active for the exchange of standard parts data Local and Metropolitan Area Networks; Withdrawn LLC; identical with ISO 88022:1989 Local and Metropolitan Area Networks; token-passing Withdrawn bus access method; identical with ISO/IEC 8802-4:1990 Project controlling; project Active management; concepts
ISO 8802-2
ISO/IEC 8802-4
DIN
TITLE
dimensions Lead storage batteries; starter DIN 72311-4 batteries, terminals, vent plugs and filler openings Lead storage batteries; starter batteries DIN 72311-8 for motor cycles and passenger cars Lead storage batteries; starter batteries for starting, DIN 72311- lighting and 13 ignition, 12 V, 27, 36, 45 and 54 Ah, for lateral basic fastening 10,5 Lead storage batteries; starter batteries for starting, DIN 72311- lighting and 16 ignition, 12 V, 27, 36, 45, 54 and 63 Ah, for lateral basic fastening 19 Lead storage batteries; starter DIN 72311batteries, 17 protective covering for terminal DIN 72311- Lead storage 18 batteries; starter batteries with basic fastening 10,5 for passenger
Active
Active
Active
Active
Active
Active
DIN
TITLE
cars and commercial vehicles; nominal capacities, main dimensions Lead storage batteries; starter batteries for commercial DIN 72311vehicles; Active 20 nominal capacities and main dimensions Lead storage batteries; starter batteries with 10,5 basic fastening lugs DIN 72311for commercial Active 21 vehicles; nominal capacities and main dimensions Terminal markings for motor vehicles; DIN 72552-1 Active scope, principles, requirements Terminal markings for DIN 72552-2 Active motor vehicles; codes Terminal markings for motor vehicles; DIN 72552-3 examples for Active application on circuit diagrams DIN 72552-4 Terminal Active markings for motor vehicles;
DIN
TITLE
DIN 75490
summary Radio communication devices in motor vehicles; Active installation space, general requirements