Documente Academic
Documente Profesional
Documente Cultură
Catalog Tevi PDF
Catalog Tevi PDF
Modernizări Modernizations
Adaptări de telecomenzi la podurile rulante Adaptations of remote controls
Montaj și punere în funcțiune utilaje metalurgice Installing and putting into operation of metallurgical
equipment
Service
Proiectare-Consulting Service
Modernizări utilaje Design and consulting
Tratamente termice de îmbunătățire și cementare Modernization of the machinery
Prelucrări de strungărie, frezare și rectificare Thermic treatments for improvement and hardening
Confecții metalice diverse Turning, milling and grinding machining
Various metallic confections
Înființată în anul 2003, Technosteel LBR deține în unitatea sa de Established in 2003, Technosteel LBR holds in its production unit Toleranțe pentru lățime/ Compoziţia chimică pe lichid /
producție din Iași: of Iasi: MARCĂ/ Tolerances for width Chemical Composition on liquid, (max. values)
• Propria linie de procesare a materiei prime; • Its own line of processing the raw material; STEEL
• Flux complet integrat de producție metalurgică; • Fully integrated flow of metallurgical production & technological GRADE "Rp "Rm "A80%
C% P% S% Mn% Ti%
• Echipamente de control al calității; chain; (N/mm2)" (N/mm2)" min."
• Flota proprie de transport. • Quality control equipment; DC01 ≤280 270-410 28 0,12 0,045 0,045 0,60 -
• Its own transport fleet. DC03 ≤240 270-370 34 0,10 0,035 0,035 0,45 -
Aceste avantaje ne oferă posibilitatea de a răspunde cu prompti- DC04 ≤210 270-350 38 0,08 0,03 0,03 0,40 -
tudine solicitărilor clienților noștri, în conformitate cu cerințele These advantages offer us the possibility to issue quick responses to DC05 ≤180 270-330 40 0,06 0,025 0,025 0,35 -
specifice fiecărei comenzi primite. all clients’ requests according to specific needs of each demand. DC06 ≤180 270-350 38 0,02 0,02 0,02 0,25 0,3
Întregul proces de producție al companiei este certificat din punct The entire production process of our company is certified in terms Stare de Livrare / Delivery state:
de vedere al sistemului calității conform ISO 9001: 2008, produsele of quality system ISO 9001: 2008 and all of our products are accom- + CR1: În general netratată, dar adecvată pentru recoacere finală / Usually untreated, but suitable for heat treatment.
livrate fiind însotite de certificate de calitate de tip 3.1. sau 2.1. panied by a quality certificate of type 3.1 or an inspection report in + CR2: Nu este destinat tratamentului termic după procesele de sudare și calibrare / Not designated for heat treatment after welding and calibration process.
conform EN 10204. conformity with EN-10204.
În cadrul Technosteel, procesul de reutilare și retehnologizare este Technosteel LBR performs a running process of re-equipment
continuu având ca scop funcționarea optimă a echipamentelor și and technological modernization in order to ensure an optimum
îmbunătățirea continuă a produselor oferite. functioning of all equipment and a continuous improving of our
products.
În acest sens, laboratoarele noastre de testare mecanică și chimică
au fost dotate cu: For that purpose, our laboratories of mechanical and chemical
Grosimea Toleranțe la grosime pentru lățimea nominală Calitate de suprafață / Surface quality Norma de fabricație: SR EN 10305-3
Lungimea Toleranțe pentru lățime / Tolerances for width
Thickness tolerances for nominal width
Nominală
/ Nominal > 1200 ≤ > 1500 ≤
Nominală/
Nominal Margini naturale / Mill edges Margini fâșiate / Trimmed edges
S1 Țevi negre (din benzi laminate la cald) / Black pipes (from hot rolled material) Fabrication Standard: EN 10305-3
thickness ≤ 1200 > 1800 length (L
1500 1800
Lower Upper Lower Upper
≤ 2.00 ± 0.17 ± 0.19 ± 0.21 --
> 2.00 ≤ 2.50 ± 0.18 ± 0.21 ± 0.23 ± 0.25 ≤12006 0 20 0 3
> 2.50 ≤ 3.00 ± 0.20 ± 0.22 ± 0.24 ± 0.26 > 1200 ≤1500 0 20 0 5 A. Ţevi cu secţiune rotundă / Pipes with Round section
> 3.00 ≤ 4.00 ± 0.22 ± 0.24 ± 0.26 ± 0.27 > 1500 0 20 0 6
> 4.00 ≤ 5.00 ± 0.24 ± 0.26 ± 0.28 ± 0.29 Diametru exterior/ Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm) /
> 5.00 ≤ 6.00 ± 0.26 ± 0.28 ± 0.29 ± 0.31 Outside Diameter Specific weight (kg/m), depending on wall thickness, (mm)
(mm) 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
Ø 14 0,462
Compoziție chimică / Ø 16 0,536 0,691
CARACTERISTICI MECANICE / MECHANICAL CHARACTERISTICS
Chemical Composition Ø 18 0,610 0,789
MARCA
/ STEEL Ø 19 0,647 0,838
GRADE Rp (N/mm2) Rm max (N/mm2) A% Ø 19,1 0,651 0,843
C% Mn% P% S% Ø 20 0,684 0,888
Ø 21,3 0,732 0,952
t≤16 16<t≤20 t≤3 3<t≤20 1,5<t≤2 2<t≤2,5 2,5<t<3 3≤t≤20 A50
Ø 22 0,758 0,986
S185 - - - - 185 175 310-540 290-510 10 11 12 16 Ø 24 0,832 1,085
S235 0,22 1,60 0,050 0,050 235 225 360-510 340-470 17 18 19 24 Ø 25 0,869 1,134 1,387
S235JR 0,17 1,40 0,045 0,045 235 225 360-510 340-470 17 18 19 24 Ø 25,4 0,884 1,154 1,412
S235J0 0,17 1,40 0,040 0,040 235 225 360-510 340-470 17 18 19 24 Ø 26,9 0,940 1,228 1,504
S235J2G3/G4 0,17 1,40 0,035 0,035 235 225 360-510 340-470 17 18 19 24 Ø 28 0,980 1,282 1,572
S275 0,25 1,60 0,050 0,050 275 265 430-580 410-560 14 15 16 20 Ø 28,6 1,002 1,312 1,609
S275JR 0,21 1,50 0,045 0,045 275 265 430-580 410-560 14 15 16 20 Ø 30 1,054 1,381 1,695 g
S275J0 0,18 1,50 0,040 0,040 275 265 430-580 410-560 14 15 16 20 Ø 32 1,128 1,480 1,819 2,146
S275J2G3/G4 0,18 1,50 0,035 0,035 275 265 430-580 410-560 14 15 16 20 Ø 33,7 1,191 1,564 1,924 2,271
S355 0,23 1,60 0,050 0,050 355 345 510-680 490-630 14 15 16 20 Ø 35 1,239 1,628 2,004 2,368
S355JR 0,24 1,60 0,045 0,045 355 345 510-680 490-630 14 15 16 20 Ø 38 1,350 1,776 2,189 2,589
S355J0 0,20 1,60 0,040 0,040 355 345 510-680 490-630 14 15 16 20 Ø 40 1,424 1,874 2,312 2,737
S355J2G3/G4 0,20 1,60 0,035 0,035 355 345 510-680 490-630 14 15 16 20 Ø 42,4 1,513 1,993 2,460 2,915 3,358 3,788
S355K2G3/G4 0,20 1,60 0,035 0,035 355 345 510-680 490-630 14 15 16 20 Ø 45 1,609 2,121 2,620 3,107 3,582 4,044
Ø 48,3 1,731 2,284 2,824 3,351 3,867 4,370
Ø 50 1,794 2,368 2,929 3,477 4,014 4,538
Ø 51 1,831 2,417 2,990 3,551 4,100 4,636 Řd
Norma de fabricație: SR EN 10025 + SR EN 10051
Tablă LBC în coli Ø 55 1,979 2,614 3,237 3,847 4,445 5,031
Fabrication Standard: EN 10025 + EN 10051 Ø 57 2,053 2,713 3,360 3,995 4,618 5,228
HRC sheets (plates) Ø 60,3 2,175 2,876 3,564 4,239 4,903 5,554
Ø 63,5 2,294 3,033 3,761 4,476 5,179 5,869
Ø 70 2,534 3,354 4,162 4,957 5,740 6,511
Grosimea Toleranțe la grosime pentru lățimea nominală Lungimea Toleranțe pentru lățime / Tolerances for width Ø 76,2 2,763 3,660 4,544 5,416 6,275 7,122 7,957 8,779 9,590 10,387
Nominală Thickness tolerances for nominal width Nominală/ Margini naturale / Mill edges Margini fâșiate / Trimmed edges
Ø 83 3,015 3,995 4,963 5,919 6,862 7,793
/ Nominal Nominal Ø 88,9 3,233 4,286 5,327 6,355 7,371 8,375 9,366 10,345 11,312 12,267
> 1200 > 1500 ≤ length (L) Ø 95 4,587 5,703 6,807 7,898 8,977 10,043 11,098 12,140 13,169
thickness ≤1200 > 1800 Lower Upper Lower Upper
≤1500 1800 Ø 100 6,011 7,176 8,329 9,470 10,598 11,714 12,818 13,909
< 2.00 ± 0.17 ± 0.19 ± 0.21 -- ≤12006 0 20 0 3 Ø 101,6 6,110 7,295 8,468 9,628 10,776 11,912 13,035 14,146
> 2.00 ≤ 2.50 ± 0.18 ± 0.21 ± 0.23 ± 0.25 > 1200 ≤1500 0 20 0 5 Ø 108 6,504 7,768 9,020 10,259 11,486 12,701 13,903 15,093
> 2.50 ≤ 3.00 ± 0.20 ± 0.22 ± 0.24 ± 0.26 > 1500 0 20 0 6 Ø 114,3 6,893 8,234 9,564 10,881 12,185 13,478 14,757 16,025
> 3.00 ≤ 4.00 ± 0.22 ± 0.24 ± 0.26 ± 0.27 Ø 125 7,553 9,026 10,487 11,936 13,373 14,797 16,209 17,608
> 4.00 ≤ 5.00 ± 0.24 ± 0.26 ± 0.28 ± 0.29 Lungimea Toleranțe la lungime / Tolerances for length, Ø 133 8,046 9,618 11,178 12,725 14,261 15,783 17,294 18,792
> 5.00 ≤ 6.00 ± 0.26 ± 0.28 ± 0.29 ± 0.31 Nominală/ (mm) Ø 150 10,876 12,645 14,402 16,147 17,880 19,600 21,308
> 6.00 ≤ 8.00 ± 0.29 ± 0.30 ± 0.31 ± 0.35 Nominal length Ø 159 11,542 13,422 15,290 17,146 18,989 20,820 22,639
> 8.00 ≤ 10.00 ± 0.32 ± 0.33 ± 0.34 ± 0.40 (L) Lower Upper Ø 188 13,687 15,925 18,151 20,364 22,565 24,754 26,930
> 10.00 ≤ 12.50 ± 0.35 ± 0.36 ± 0.37 ± 0.43 ≤1200 0 10 Dimensiuni “extra cost”. / Extra charge dimensions.
> 12.50 ≤ 15.00 ± 0.37 ± 0.38 ± 0.40 ± 0.46 > 2000 < 8000 0 + 0.005 x L
> 15.00 ≤ 25.00 ± 0.40 ± 0.42 ± 0.45 ± 0.50 > 8000 0 40
B. Ţevi cu secţiune ovală (oval plat) / Pipes with oval section
Compoziție Chimică / Greutatea specifică (kg/m) funcţie de grosimea
CARACTERISTICI MECANICE / MECHANICAL CHARACTERISTICS Profil/ peretelui ţevii /Specific weight (kg/m), depending of a
Chemical Composition
MARCA Profile wall thickness, (mm)
/ STEEL (mm)
GRADE Rp (N/mm2) Rm max (N/mm2) A% 1,50 2,00 2,50 3,00
b
C% Mn% P% S%
30x15 0,869 1,134 r
t≤16 16<t≤20 t≤3 3<t≤20 1,5<t≤2 2<t≤2,5 2,5<t<3 3≤t≤20 A50 38x20 1,128 1,480 1,819
S185 - - - - 185 175 310-540 290-510 10 11 12 16 48x18 1,350 1,776 2,189 2,589
S235 0,22 1,60 0,050 0,050 235 225 360-510 340-470 17 18 19 24 60x20 1,646 2,170 2,682 3,181
S235JR 0,17 1,40 0,045 0,045 235 225 360-510 340-470 17 18 19 24 Dimensiuni "extra cost". / Extra charge dimensions.
S235J0 0,17 1,40 0,040 0,040 235 225 360-510 340-470 17 18 19 24
S235J2G3/G4 0,17 1,40 0,035 0,035 235 225 360-510 340-470 17 18 19 24 a
S275 0,25 1,60 0,050 0,050 275 265 430-580 410-560 14 15 16 20 C. Ţevi cu secţiune eliptică / Pipes with elliptic section
S275JR 0,21 1,50 0,045 0,045 275 265 430-580 410-560 14 15 16 20 Greutatea specifică (kg/m) funcţie de grosimea
S275J0 0,18 1,50 0,040 0,040 275 265 430-580 410-560 14 15 16 20 Profil/ peretelui ţevii /Specific weight (kg/m), depending of
S275J2G3/G4 0,18 1,50 0,035 0,035 275 265 430-580 410-560 14 15 16 20 Profile r g
wall thickness, (mm)
R
b
S355 0,23 1,60 0,050 0,050 355 345 510-680 490-630 14 15 16 20 (mm)
S355JR 0,24 1,60 0,045 0,045 355 345 510-680 490-630 14 15 16 20 1,50 2,00 2,50 3,00
S355J0 0,20 1,60 0,040 0,040 355 345 510-680 490-630 14 15 16 20 30x20 0,869 1,134
S355J2G3/G4 0,20 1,60 0,035 0,035 355 345 510-680 490-630 14 15 16 20
S355K2G3/G4 0,20 1,60 0,035 0,035 355 345 510-680 490-630 14 15 16 20
Norma de fabricație: SR EN 10305-3 Calitate de suprafață / Surface quality Calitate de suprafață / Surface quality Norma de fabricație: SR EN 10162/2003
Fabrication Standard: EN 10305-3
S3 Țevi din benzi laminate la rece / Pipe from cold rolled material
S1 Profile cornier cu aripi inegale/ Cold bended L profile, with unequal wings Fabrication Standard: EN 10162/2003
Dimensiune
aripi / Wings Grosime / Thickness, (mm)
dimmensions,
g
A. Ţevi cu secţiune rotundă / Pipes with round section (mm) 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00
20 x 10 0,318
Diametru Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm) / 20 x 15 0,377 0,487
exterior/ Specific weight (kg/m), depending on wall thickness, (mm) 25 x 10 0,377
Outside 25 x 15 0,436 0,565
Diameter, 25 x 20 0,495 0,644 0,785 0,918
(mm) 0,70 0,80 0,90 1,00 1,10 1,20 1,50 2,00 2,50 3,00 28 x 19 0,518 0,675 0,824 0,966
Ø 12 0,195 0,221 0,246 0,271 0,296 0,320 0,388 30 x 15 0,495 0,644
Ø 12,7 0,207 0,235 0,262 0,289 0,315 0,340 0,414 30 x 20 0,553 0,722 0,883 1,036
Řd Ø 14 0,230 0,260 0,291 0,321 0,350 0,379 0,462 30 x 25 0,612 0,801 0,981 1,154
Ø 16 0,264 0,300 0,335 0,370 0,404 0,438 0,536 0,691 35 x 15 0,553 0,722
Ø 18 0,299 0,339 0,380 0,419 0,458 0,497 0,610 0,789 35 x 20 0,612 0,801 0,981 1,154
Ø 19 0,316 0,359 0,402 0,444 0,486 0,527 0,647 0,838 35 x 25 0,671 0,879 1,079 1,272
Ø 19,1 0,318 0,361 0,404 0,446 0,488 0,530 0,651 0,843 35 x 30 0,730 0,958 1,178 1,389 1,594 1,790
Ø 20 0,333 0,379 0,424 0,469 0,513 0,556 0,684 0,888 40 x 15 0,612 0,801
Ø 21,3 0,356 0,404 0,453 0,501 0,548 0,595 0,732 0,952 40 x 20 0,671 0,879 1,079 1,272
Ø 22 0,368 0,418 0,468 0,518 0,567 0,616 0,758 0,986 40 x 25 0,730 0,958 1,178 1,389
Ø 24 0,402 0,458 0,513 0,567 0,621 0,675 0,832 1,085 40 x 30 0,789 1,036 1,276 1,507 1,731 1,947
Ø 25 0,477 0,535 0,592 0,648 0,704 0,869 1,134 1,387 40 x 35 0,848 1,115 1,374 1,625 1,868 2,104
Ø 25,4 0,485 0,544 0,602 0,659 0,716 0,884 1,154 1,412 45 x 20 0,730 0,958 1,178 1,389
Ø 26,9 0,515 0,577 0,639 0,700 0,761 0,940 1,228 1,504 45 x 25 0,789 1,036 1,276 1,507
Ø 28 0,601 0,666 0,730 0,793 0,980 1,282 1,572 45 x 30 0,848 1,115 1,374 1,625 1,868 2,104
Ø 28,6 0,615 0,681 0,746 0,811 1,002 1,312 1,609 45 x 35 0,907 1,193 1,472 1,743 2,006 2,261
Ø 30 0,646 0,715 0,784 0,852 1,054 1,381 1,695 45 x 40 0,966 1,272 1,570 1,860 2,143 2,418 2,685 2,944
Ø 32 0,690 0,765 0,838 0,911 1,128 1,480 1,819 2,146 50 x 15 0,730 0,958
Ø 33,7 0,728 0,806 0,884 0,962 1,191 1,564 1,924 2,271 50 x 20 0,789 1,036 1,276 1,507
Ø 35 0,757 0,838 0,920 1,000 1,239 1,628 2,004 2,368 50 x 25 0,848 1,115 1,374 1,625
Ø 38 0,823 0,912 1,001 1,089 1,350 1,776 2,189 2,589 50 x 30 0,907 1,193 1,472 1,743 2,006 2,261
Ø 40 0,868 0,962 1,055 1,148 1,424 1,874 2,312 2,737 50 x 35 0,966 1,272 1,570 1,860 2,143 2,418
Ø 42,4 0,921 1,021 1,120 1,219 1,513 1,993 2,460 2,915 50 x 40 1,024 1,350 1,668 1,978 2,280 2,575 2,861 3,140
Ø 45 0,979 1,085 1,191 1,296 1,609 2,121 2,620 3,107 50 x 45 1,083 1,429 1,766 2,096 2,418 2,732 3,038 3,336
Ø 48,3 1,052 1,166 1,280 1,394 1,731 2,284 2,824 3,351 55 x 15 0,789 1,036
Ø 50 1,090 1,208 1,327 1,444 1,794 2,368 2,929 3,477 55 x 20 0,848 1,115 1,374 1,625
Ø 51 1,354 1,474 1,831 2,417 2,990 3,551 55 x 25 0,907 1,193 1,472 1,743
Ø 55 1,462 1,592 1,979 2,614 3,237 3,847 55 x 30 0,966 1,272 1,570 1,860 2,143 2,418
Ø 57 1,516 1,651 2,053 2,713 3,360 3,995 55 x 35 1,024 1,350 1,668 1,978 2,280 2,575
Ø 60,3 1,606 1,749 2,175 2,876 3,564 4,239 55 x 40 1,083 1,429 1,766 2,096 2,418 2,732 3,v038 3,336
Ø 63,5 1,844 2,294 3,033 3,761 4,476 55 x 45 1,142 1,507 1,864 2,214 2,555 2,889 3,215 3,533
Ø 70 2,534 3,354 4,162 4,957 60 x 15 0,848 1,115
Ø 76,2 2,763 3,660 4,544 5,416 60 x 20 0,907 1,193 1,472 1,743
Ø 83 3,015 3,995 4,963 5,919 60 x 25 0,966 1,272 1,570 1,860
Ø 88,9 3,233 4,286 5,327 6,355 60 x 30 1,024 1,350 1,668 1,978 2,280 2,575
Ø 95 4,587 5,703 6,807 60 x 35 1,083 1,429 1,766 2,096 2,418 2,732
Ø 100 6,011 7,176 60 x 40 1,142 1,507 1,864 2,214 2,555 2,889 3,215 3,533
Ø 101,6 6,110 7,295 Dimensiuni “extra cost”. / Extra charge dimensions.
Ø 108 6,504 7,768
Ø 114,3 6,893 8,234
Ø 125 7,553 9,026
Ø 133 8,046 9,618 Compoziție Chimică /
CARACTERISTICI MECANICE / MECHANICAL CHARACTERISTICS
Ø 150 10,876 Chemical Composition
Ø 159 11,542 MARCA /
Ø 188 13,687 STEEL GRADE Rp (N/mm2) Rm max (N/mm2) A%
Dimensiuni “extra cost”. / Extra charge dimensions. C% Mn% P% S%
t≤16 16<t≤20 t≤3 3<t≤20 1,5<t≤2 2<t≤2,5 2,5<t<3 3≤t≤20 A50
Caracteristici mecanice / Mechanical characteristics S185 - - - - 185 175 310-540 290-510 10 11 12 16
S235 0,22 1,60 0,050 0,050 235 225 360-510 340-470 17 18 19 24
+ CR1 +CR2
Marca de oţel / S235JR 0,17 1,40 0,045 0,045 235 225 360-510 340-470 17 18 19 24
Rm* A* Rm* ReH* A*
Steel Grade
(N/mm2) % (N/mm2) (N/mm2) %
E155 290 15
E190 270 190 26
E195 330 8
E220 310 220 23
E235 390 7
E260 340 260 21
E275 440 6
E320 410 320 19
E355 540 5
* Valori minim admise / Minimal permitted values
Norma de fabricație: SR EN 10217; SR EN 10255 Calitate de suprafață / Surface quality Calitate de suprafață / Surface quality Norma de fabricație: SR EN 10305-3
S4 Țevi din benzi zincate / Pipes from galvanized strips S4 Țevi din benzi zincate / Pipes from galvanized strips
b
Ø 17,2 3/8" 0,750 0,845 0,70 0,80 0,90 1,00 1,10 1,20 1,50 2,00 2,50 3,00
Ø 21,3 DN15 1/2" 0,952 1,078 1,199 1,316 30x15 0,477 0,5350,592 0,648 0,704 0,869 1,134 r
Ø 26,9 DN20 3/4" 1,228 1,395 1,558 1,7161,870 38x20 0,616 0,6900,765 0,838 0,911 1,128 1,480 1,819
Ø 33,7 DN25 1" 1,781 1,994 2,2032,407 2,672 48x18 0,8230,912 1,001 1,089 1,350 1,776 2,189 2,589
Ø 42,4 DN32 1 1/4" 2,275 2,552 2,8253,094 3,445 3,788 60x20 1,110 1,218 1,326 1,646 2,170 2,682 3,181
Ø 48,3 DN40 1 1/2" 2,930 3,2473,559 3,969 4,370 Dimensiuni “extra cost”. / Extra charge dimensions.
Ø 60,3 DN50 2" 3,700 4,1054,506 5,034 5,554 6,193
Ø 76,1 DN65 2 1/2" 5,2355,753 6,437 7,112 7,946 8,767 9,576 10,373
Ø 88,9 DN80 3" 6,1516,763 7,573 8,375 9,366 10,345 11,312 12,267
Ø 114,3 DN100 4" 8,768 9,828 10,881 12,185 13,478 14,757 16,025
Dimensiuni “extra cost”. / Extra charge dimensions.
a
C. Ţevi cu secţiune eliptică / Pipes with elliptic section
g
ax45°
Caracteristici mecanice / Mechanical characteristics Profil/ Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm)
Specific weight (kg/m), depending on wall thickness, (mm) r g
Profile,
R
b
Marca de oţel / ReH* Rm A t* (mm)
0,70 0,80 0,90 1,00 1,10 1,20 1,50 2,00 2,50 3,00
Řd
Řd
S1
41*35 0,872 0,979 1,085 1,191 1,296 1,609 2,121 2,620 3,107
Fabrication Standard: EN 10162/2003 Profile cornier cu aripi egale/ Cold bended L profile, with equal wings Dimensiuni “extra cost”. / Extra charge dimensions.
Dimensiune
aripi / Wings Grosime / Thickness, (mm)
dimmensions,
(mm) 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00
15 x 15 0,318 0,408
20 x 20 0,436 0,565 0,687 0,801
25 x 25 0,553 0,722 0,883 1,036
30 x 30 0,671 0,879 1,079 1,272 1,456 1,633
35 x 35 0,789 1,036 1,276 1,507 1,731 1,947 2,155
Caracteristici mecanice / Mechanical characteristics
40 x 40 0,907 1,193 1,472 1,743 2,006 2,261 2,508 2,748
45 x 45 1,024 1,350 1,668 1,978 2,280 2,575 2,861 3,140 + CR1 +CR2 Ţevi cu secţiune eliptică din benzi laminate la rece
50 x 50 1,142 1,507 1,864 2,214 2,555 2,889 3,215 3,533 Marca de oţel / Rm* A* Rm* ReH* A* Pipes with elliptic section from cold rolled material
Dimensiuni “extra cost”. / Extra charge dimensions. Steel Grade (N/mm2) % (N/mm2) (N/mm2) %
E155 290 15
Compoziție Chimică / E190 270 190 26
CARACTERISTICI MECANICE / MECHANICAL CHARACTERISTICS
Chemical Composition E195 330 8
MARCA E220 310 220 23
/ STEEL E235 390 7
GRADE Rp (N/mm2) Rm max (N/mm2) A%
C% Mn% P% S% E260 340 260 21
E275 440 6
t≤16 16<t≤20 t≤3 3<t≤20 1,5<t≤2 2<t≤2,5 2,5<t<3 3≤t≤20 A50 E320 410 320 19
S185 - - - - 185 175 310-540 290-510 10 11 12 16 E355 540 5
S235 0,22 1,60 0,050 0,050 235 225 360-510 340-470 17 18 19 24 * Valori minim admise / Minimal permitted values
S235JR 0,17 1,40 0,045 0,045 235 225 360-510 340-470 17 18 19 24
25 x 20 0,944 1,207
1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00 30 x 10 0,826
12 x 12 30 x 15 0,944 1,207
13 x 13 0,538 30 x 20 1,061 1,364 1,640 1,890
15 x 15 0,632 0,810 30 x 25 1,179 1,521 1,836 2,126 a
a
16 x 16 0,679 0,872 35 x 10 0,944
20 x 20 0,868 1,124 35 x 15 1,061 1,364
25 x 25 1,103 1,438 1,756 35 x 20 1,179 1,521 1,836 2,126
g
30 x 30 1,339 1,752 2,148 2,392 35 x 25 1,297 1,678 2,032 2,361
b
32 x 32 1,433 1,877 2,305 2,580 40 x 10 1,061
35 x 35 1,574 2,066 2,541 2,863 40 x 15 1,179 1,521 r
40 x 40 1,810 2,380 2,933 3,334 40 x 20 1,297 1,678 2,032 2,361
45 x 45 2,045 2,694 3,326 3,805 40 x 25 1,415 1,835 2,229 2,597
50 x 50 2,281 3,008 3,718 4,276 40 x 30 1,532 1,992 2,425 2,832
55 x 55 2,516 3,322 4,111 4,747 45 x 15 1,297 1,678
60 x 60 2,752 3,636 4,503 5,218 6,003 6,764 7,501 8,214 8,902 9,567 45 x 20 1,415 1,835 2,229 2,597
70 x 70 3,223 4,264 5,288 6,160 7,102 8,020 8,914 9,784 10,629 11,451 45 x 25 1,532 1,992 2,425 2,832
80 x 80 4,892 6,073 7,102 8,201 9,276 10,327 11,354 12,356 13,335 50 x 15 1,415 1,835
90 x 90 6,858 8,044 9,300 10,532 11,740 12,924 14,083 15,219 50 x 20 1,532 1,992 2,425 2,832
100 x 100 7,643 8,986 10,399 11,788 13,153 14,494 15,810 17,103 50 x 30 1,768 2,306 2,817 3,303
120 x 120 9,213 10,870 12,597 14,300 15,979 17,634 19,264 20,871 50 x 40 2,003 2,620 3,210 3,774 4,313 4,826
150 x 150 13,696 15,894 18,068 20,218 22,344 24,445 26,523 50 x 45 2,121 2,777 3,406 4,010 4,588 5,140
Dimensiuni “extra cost”. / Extra charge dimensions. 55 x 25 1,768 2,306 2,817 3,303
60 x 20 1,768 2,306 2,817 3,303
60 x 30 2,003 2,620 3,210 3,774
60 x 35 2,121 2,777 3,406 4,010
60 x 40 2,239 2,934 3,602 4,245 4,863 5,454
Ţevi cu secţiune pătrată din benzi laminate la cald 60 x 50 2,474 3,248 3,995 4,716 5,412 6,082
Pipes with square section from hot rolled material 70 x 25 2,121 2,777 3,406 4,010
70 x 30 2,239 2,934 3,602 4,245
70 x 40 2,474 3,248 3,995 4,716 5,412
80 x 30 2,474 3,248 3,995 4,716
70 x 50 2,710 3,562 4,387 5,187 5,962 6,710
80 x 40 2,710 3,562 4,387 5,187 5,962 6,710 7,433 8,130
70 x 60 2,945 3,876 4,780 5,658 6,511 7,338
80 x 50 2,945 3,876 4,780 5,658 6,511 7,338
90 x 40 2,945 3,876 4,780 5,658 6,511 7,338
80 x 60 3,181 4,190 5,172 6,129 7,061 7,966 8,846 9,700 10,528 11,330
80 x 70 4,504 5,565 6,600 7,610 8,594 9,552 10,485 11,391 12,272
90 x 50 3,181 4,190 5,172 6,129 7,061 7,966
90 x 60 4,504 5,565 6,600 7,610 8,594 9,552 10,485 11,391 12,272
90 x 70 5,957 7,071 8,160 9,222 10,259 11,270 12,255 13,214
90 x 80 6,350 7,542 8,709 9,850 10,965 12,055 13,118 14,156
100 x 40 3,181 4,190 5,172 6,129 7,061 7,966
100 x 50 10,948 5,565 6,600 7,610 8,594
100 x 60 5,957 7,071 8,160 9,222 10,259 11,270 12,255 13,214
100 x 70 6,350 7,542 8,709 9,850 10,965 12,055 13,118 14,156
100 x 80 6,742 8,013 9,259 10,478 11,672 12,840 13,982 15,098
120 x 40 5,957 7,071 8,160 9,222
120 x 50 6,350 7,542 8,709 9,850
120 x 60 6,742 8,013 9,259 10,478 11,672 12,840 13,982 15,098
120 x 80 7,527 8,955 10,358 11,734 13,085 14,410 15,709 16,982
Caracteristici mecanice / Mechanical characteristics 140 x 70 7,920 9,426 10,907 12,362 13,791 15,195 16,572 17,924
150 x 50 7,527 8,955 10,358 11,734 13,085 14,410
+ CR1 +CR2 150 x 60 7,920 9,426 10,907 12,362 13,791 15,195 16,572 17,924
Marca de oţel /
Steel Grade Rm* "A* Rm* ReH* "A* 150 x 90 9,097 10,839 12,556 14,246 15,911 17,550 19,163 20,750
(N/mm2) %" (N/mm2) (N/mm2) %" 150 x 100 11,310 13,105 14,874 16,617 18,335 20,026 21,692
E155 290 15 160 x 50 9,426 10,907 12,362 13,791 15,195 16,572 17,924
E190 270 190 26 200 x 100 13,665 15,853 18,014 20,150 22,260 24,344 26,402
E195 330 8 Dimensiuni “extra cost”. / Extra charge dimensions.
E220 310 220 23
E235 390 7
E260 340 260 21
E275 440 6
E320 410 320 19
E355 540 5
* Valori minim admise / Minimal permitted values
Calitate de suprafață / Surface quality B. Ţevi cu secţiune dreptunghiulară / Pipes with rectangular section Calitate de suprafață / Surface quality
A. Ţevi cu secţiune rotunda/ Pipes with square section
Secțiune, Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm) Țevi negre (din benzi laminate
Țevi negre (din benzi lam-
S1 S1
Diametru Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii , (mm) Section, Specific weight (kg/m), depending on wall thickness, (mm) la cald) / Black pipes (from
inate la cald) / Black pipes exterior,
(from hot rolled material)
Specific weight (kg/m), depending on wall thickness, (mm) (mm) hot rolled material)
Outside 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
Diameter, 20 x 10 0,632
(mm) 1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00 20 x 20 0,868 1,124
Ø 12 0,388 25 x 10 0,750
Norma de fabricație: SR EN 10219-2 Norma de fabricație: SR EN 10305-3
Ø 12,7 0,414 25 x 15 0,868 1,124
Fabrication Standard: EN 10219-2 Ø 14 0,462 25 x 20 0,985 1,281 Fabrication Standard: EN 10305-3
Ø 16 0,536 0,690 30 x 10 0,868
Ø 17,2 0,580 0,749 30 x 15 0,985 1,281
Ø 18 0,610 0,789 30 x 20 1,103 1,438 1,756 1,921
Ø 19 0,647 0,838 30 x 25 1,221 1,595 1,952 2,156
g Ø 20 0,684 0,887 35 x 10 0,985 a
Ø 21,3 0,732 0,951 1,159 35 x 15 1,103 1,438
Ø 22 0,758 0,986 1,202 35 x 20 1,221 1,595 1,952 2,156
g
Ø 25 0,869 1,134 1,387 35 x 25 1,339 1,752 2,148 2,392
b
Ø 26,9 0,939 1,228 1,504 40 x 10 1,103
Ø 28 0,980 1,282 1,571 40 x 15 1,221 1,595
r
Ø 30 1,054 1,380 1,695 40 x 20 1,339 1,752 2,148 2,392
Ø 32 1,128 1,479 1,818 2,144 40 x 25 1,456 1,909 2,344 2,627
Ø 33,7 1,191 1,563 1,923 2,270 40 x 30 1,574 2,066 2,541 2,863
Ø 35 1,239 1,627 2,003 2,366 45 x 15 1,339 1,752
Řd
Ø 38 1,350 1,775 2,188 2,588 45 x 20 1,456 1,909 2,344 2,627
Ø 40 1,423 1,873 2,311 2,736 45 x 25 1,574 2,066 2,541 2,863
Ø 42,4 1,512 1,992 2,459 2,914 3,356 3,786 50 x 15 1,456 1,909
Ø 45 1,608 2,120 2,619 3,106 3,580 4,042 50 x 20 1,574 2,066 2,541 2,863
Ø 48,3 1,730 2,282 2,822 3,350 3,865 4,368 50 x 30 1,810 2,380 2,933 3,334
Ø 50 1,793 2,366 2,927 3,476 4,012 4,535 50 x 40 2,045 2,694 3,326 3,805 4,354 4,880
Ø 51 1,830 2,416 2,989 3,549 4,098 4,634 50 x 45 2,163 2,851 3,522 4,040 4,629 5,194
Ø 55 1,978 2,613 3,235 3,845 4,443 5,028 55 x 25 1,810 2,380 2,933 3,334
Ø 57 2,052 2,711 3,358 3,993 4,616 5,226 60 x 20 1,810 2,380 2,933 3,334
Ø 60,3 2,174 2,874 3,562 4,237 4,900 5,551 60 x 30 2,045 2,694 3,326 3,805
Ø 63,5 2,292 3,032 3,759 4,474 5,176 5,866 60 x 35 2,163 2,851 3,522 4,040
Ø 70 2,533 3,352 4,160 4,954 5,737 6,507 60 x 40 2,281 3,008 3,718 4,276 4,904 5,508
Ø 76,2 2,762 3,658 4,542 5,413 6,272 7,119 9,585 10,382 70 x 25 2,163 2,851 3,522 4,040
Ø 83 3,013 3,993 4,961 5,916 6,859 7,789 70 x 30 2,281 3,008 3,718 4,276
Ø 88,9 3,231 4,284 5,324 6,352 7,368 8,371 9,362 10,340 11,306 12,260 70 x 40 2,516 3,322 4,111 4,747 5,453 6,136
Ø 95 4,585 5,700 6,803 7,894 8,972 10,038 11,092 12,133 13,163 70 x 50 2,752 3,636 4,503 5,218 6,003 6,764
Ø 100 6,008 7,173 8,325 9,465 10,593 11,708 12,811 13,902 80 x 40 2,752 3,636 4,503 5,218 6,003 6,764
Ø 101,6 6,107 7,291 8,463 9,623 10,770 11,905 13,028 14,139 80 x 50 2,987 3,950 4,896 5,689 6,552 7,392
Ø 108 6,501 7,764 9,015 10,254 11,480 12,694 13,896 15,085 80 x 60 3,223 4,264 5,288 6,160 7,102 8,020 8,914 9,784 10,629 11,451
Ø 114 6,871 8,208 9,533 10,846 12,146 13,434 14,709 15,973 80 x 70 4,578 5,681 6,631 7,651 8,648 9,620 10,569 11,493 12,393
Ø 125 7,549 9,022 10,482 11,930 13,366 14,789 16,201 17,599 90 x 50 3,223 4,264 5,288 6,160 7,102 8,020
Ø 133 8,042 9,613 11,172 12,719 14,253 15,775 17,285 18,783 90 x 60 4,578 5,681 6,631 7,651 8,648 9,620 10,569 11,493 12,393
Ø 150 10,870 12,639 14,395 16,139 17,871 19,590 21,297 90 x 70 6,073 7,102 8,201 9,276 10,327 11,354 12,356 13,335
Ø 159 11,536 13,415 15,282 17,137 18,980 20,810 22,628 90 x 80 6,466 7,573 8,750 9,904 11,033 12,139 13,220 14,277
Ø 188 13,680 15,917 18,142 20,354 22,554 24,741 26,917 100 x 40 3,223 4,264 5,288 6,160 7,102 8,020
Dimensiuni “extra cost”. / Extra charge dimensions. 100 x 50 4,578 5,681 6,631 7,651 8,648
100 x 60 6,073 7,102 8,201 9,276 10,327 11,354 12,356 13,335
100 x 70 6,466 7,573 8,750 9,904 11,033 12,139 13,220 14,277
r B. Ţevi cu secţiune pătrată / Pipes with square section 100 x 80 6,858 8,044 9,300 10,532 11,740 12,924 14,083 15,219
120 x 40 6,073 7,102 8,201 9,276
Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii , (mm) 120 x 50 6,466 7,573 8,750 9,904
Secțiune, Specific weight (kg/m), depending of wall thickness, (mm) 120 x 60 6,858 8,044 9,300 10,532 11,740 12,924 14,083 15,219
Section, 120 x 80 7,643 8,986 10,399 11,788 13,153 14,494 15,810 17,103
g (mm)
1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00 150 x 50 7,643 8,986 10,399 11,788 13,153 14,494 15,810 17,103
a
Norma de fabricație: SR EN 10305-3 Calitate de suprafață / Surface quality Calitate de suprafață / Surface quality Norma de fabricație: SR EN 10305-5
Fabrication Standard: EN 10305-3
S3 Țevi din benzi laminate la rece / Pipe from cold rolled material S3 Țevi din benzi laminate la rece / Pipe from cold rolled material Fabrication Standard: EN 10305-5
S4 Țevi din benzi zincate / Pipes from galvanized strips S4 Țevi din benzi zincate / Pipes from galvanized strips
r a
A. Ţevi cu secţiune pătrată / Pipes with square section B. Ţevi cu secţiune dreptunghiulară / Pipes with rectangular section
g
Secțiune,
Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm)
Greutatea specifică (kg/m) funcţie de grosimea peretelui ţevii, (mm)
b
Section, Specific weight (kg/m), depending on wall thickness, (mm) Secțiune,
g
(mm) Section, Specific weight (kg/m), depending on wall thickness, (mm) r
a
0,70 0,80 0,90 1,00 1,10 1,20 1,50 2,00 2,50 3,00 (mm)
12 x 12 0,248 0,280 0,312 0,344 0,70 0,80 0,90 1,00 1,10 1,20 1,50 2,00 2,50 3,00
13 x 13 0,270 0,305 0,341 0,375 0,409 0,442 0,538 20 x 10 0,313 0,356 0,397 0,438 0,478 0,518 0,632
15 x 15 0,313 0,356 0,397 0,438 0,478 0,518 0,632 0,810 20 x 20 0,423 0,481 0,538 0,595 0,651 0,706 0,868 1,124
16 x 16 0,381 0,425 0,469 0,513 0,555 0,679 0,872 25 x 10 0,368 0,418 0,468 0,516 0,564 0,612 0,750
a 20 x 20 0,481 0,538 0,595 0,651 0,706 0,868 1,124 25 x 15 0,423 0,481 0,538 0,595 0,651 0,706 0,868 1,124
25 x 25 0,680 0,752 0,823 0,894 1,103 1,438 1,756 25 x 20 0,478 0,544 0,609 0,673 0,737 0,800 0,985 1,281
30 x 30 0,909 0,996 1,083 1,339 1,752 2,148 2,392 30 x 10 0,423 0,481 0,538 0,595 0,651 0,706 0,868
32 x 32 1,065 1,158 1,433 1,877 2,305 2,580 30 x 15 0,544 0,609 0,673 0,737 0,800 0,985 1,281
35 x 35 1,169 1,271 1,574 2,066 2,541 2,863 30 x 20 0,607 0,680 0,752 0,823 0,894 1,103 1,438 1,756 2,057
40 x 40 1,460 1,810 2,380 2,933 3,334 30 x 25 0,670 0,750 0,830 0,910 0,989 1,221 1,595 1,952 2,293
45 x 45 1,648 2,045 2,694 3,326 3,805 35 x 10 0,544 0,609 0,673 0,737 0,800 0,985
50 x 50 2,281 3,008 3,718 4,276 35 x 15 0,607 0,680 0,752 0,823 0,894 1,103 1,438
55 x 55 2,516 3,322 4,111 4,747 35 x 20 0,670 0,750 0,830 0,910 0,989 1,221 1,595
60 x 60 2,752 3,636 4,503 5,218 35 x 25 0,732 0,821 0,909 0,996 1,083 1,339 1,752 2,148
70 x 70 3,223 4,264 5,288 6,160 40 x 10 0,607 0,680 0,752 0,823 0,894 1,103
80 x 80 4,892 6,073 7,102 40 x 15 0,670 0,750 0,830 0,910 0,989 1,221 1,595
90 x 90 6,858 8,044 40 x 20 0,732 0,821 0,909 0,996 1,083 1,339 1,752
100 x 100 7,643 8,986 40 x 25 0,987 1,083 1,177 1,456 1,909 2,344
120 x 120 9,213 10,870 40 x 30 1,066 1,169 1,271 1,574 2,066 2,541 2,999
150 x 150 13,696 45 x 15 1,083 1,339 1,752
Dimensiuni “extra cost”. / Extra charge dimensions. 45 x 20 1,177 1,456 1,909
45 x 25 1,271 1,574 2,066 2,541
50 x 15 1,177 1,456 1,909
50 x 20 1,271 1,574 2,066
50 x 25 1,365 1,692 2,223 2,737 3,235
50 x 30 1,460 1,810 2,380 2,933 3,470
Ţevi cu secţiune pătrată din benzi laminate la rece 50 x 40 1,648 2,045 2,694 3,326 3,941
Pipes with square section from cold rolled material 50 x 45 1,742 2,163 2,851 3,522 4,177
55 x 25 1,460 1,810 2,380 2,933 3,470
60 x 20 1,460 1,810 2,380 2,933 3,470
60 x 30 1,648 2,045 2,694 3,326 3,941
60 x 35 1,742 2,163 2,851 3,522 4,177
60 x 40 1,836 2,281 3,008 3,718 4,412
70 x 25 2,163 2,851 3,522 4,177
70 x 30 2,281 3,008 3,718 4,412
70 x 40 2,516 3,322 4,111 4,883
70 x 50 2,752 3,636 4,503 5,354
80 x 40 2,752 3,636 4,503 5,354
80 x 50 2,987 3,950 4,896 5,825
80 x 60 3,223 4,264 5,288 6,296
80 x 70 4,578 5,681 6,767
90 x 50 4,264 5,288 6,296
90 x 60 4,578 5,681 6,767
90 x 70 4,892 6,073 7,238
90 x 80 5,206 6,466 7,709
100 x 40 4,264 5,288 6,296
100 x 50 4,578 5,681 6,767
100 x 60 6,073 7,238
100 x 70 6,466 7,709
100 x 80 6,858 8,180
Caracteristici mecanice / Mechanical characteristics 120 x 40 6,073 7,238
120 x 50 6,466 7,709
+ CR1 +CR2 120 x 60 6,858 8,180
Marca de oţel /
Rm* "A* %" Rm* ReH* "A*%" 120 x 80 7,643 9,122
Steel Grade
(N/mm2) (N/mm2) (N/m2) 150 x 50 7,643 9,122
E155 290 15 150 x 90 11,006
E190 270 190 26 150 x 100 11,477
E195 330 8 200 x 100 13,832
E220 310 220 23 Dimensiuni “extra cost”. / Extra charge dimensions.
E235 390 7
E260 340 260 21
E275 440 6
E320 410 320 19
E355 540 5
* Valori minim admise / Minimal permitted values