Documente Academic
Documente Profesional
Documente Cultură
TEST
CLASA A XI A
M2- Aplicaţii CAD
Denumirea temei: MODELAREA SOLIDELOR TRIDIMENSIONALE
Specify length: 48
Specify width: 38
Specify height: 28
1
Command: SPHERE
Current wire frame density:
ISOLINES=4
Specify center of sphere
<0,0,0>:<enter>
Specify radius of sphere or
[Diameter]: 5
SPHERE
Command: ISOLINES
Enter new value for
ISOLINES <4>: 16
Command: _regen
Regenerating model.
Command: CYLINDER
Current wire frame density:
ISOLINES=20
Specify center point for base
CYLINDER
of cylinder or [Elliptical]
<0,0,0>: <enter>
Specify radius for base of
cylinder or [Diameter]: 50
Specify height of cylinder or
[Center of other end]: 100
Command: CONE
Current wire frame density:
ISOLINES=20
Specify center point for base
CONE of cone or [Elliptical]
<0,0,0>: <enter>
Specify radius for base of
cone or [Diameter]: 50
Specify height of cone or
[Apex]: 100
Command:
WEDGE
WEDGE Specify first corner of wedge
or [CEnter] <0,0,0>:
<enter>
Specify corner or
[Cube/Length]: L
Specify length: 80
Specify width: 50
Specify height: 100
2
Command: _torus
Current wire frame density:
TORUS ISOLINES=16
Specify center of torus
<0,0,0>: <enter> torus
Specify radius of torus or
[Diameter]: 30
Specify radius of tube or
tube
[Diameter]: 5